Top 10 Best 12an Fitting

Application Universal fuel line hose, Such as fuel, lube, alcohol, ethanol, coolant, and air for automobiles or marine engines, most suitable for racing cars motor racing bikes.. Reliable Material The fuel line hose based on high-quality stainless steel, aluminum alloy and nylon, it has excellent flexibility and wear resistance. The outer nylon braid has excellent flame resistance and is safe to use.. The fuel line hose Maximum Working Pressure of Braided Steel Fuel Hose psi 500 psi. Bursting pressure psi 2000psi. Operating temperature range -40F to 257F -40C to 129C. Before buying, make sure that the pressure and temperature range are suitable for your application.. Package Includes 6pcs 12an rotating hose ends 2 straight, 2pcs 45 degrees, 2pcs 90 degrees,2pcs 12an hose separator clamp,1pcs gloves,34 braided fuel pipes length 10 feet. Hose ID 0.69 inch 17.45 mm. The outer diameter of the hose 0.95 inches 24.38 mm.. Perfect Replacement Fuel line hose, reliable material can safely replace the original parts, covered with high-quality braided nylon, enhance flexibility and provide a cool racing appearance.

Universal, Fits All Oil Fuel Water Fluid Air Line or Gauges. Anodized finish for strength and durability. Made of high quality lightweight T6061 Aluminum. Different size with 4-AN6-AN8-AN10-AN12-AN Ends. Different colors red blue or black.

Double Swivel Seal 360 Degree Adjustment after installation.. Use with Stainless and Nylon braided hose.. Anodized to provide corrosion resistance and shine.. Can be used for most automotive needs, such as Fuel, Oil, Coolant, Air, and more. 100 Reusable.

The female AN12 90 degree swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure 1000psi. Working Temperature Range -65 to 252 -53 to 122. Can be suitable for competition applications where reduced weight is needed.. 12AN 90 degree swivel hose end is widely used in oil fuel water fluid airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided CPE fuel hose. They are not compatible with PTFE hose, E85, rubber hose.. These new full flow swivel hose ends swivel 360 to allow for a quick alignment of the hose after assembly. Swivel hose end can be reused and recycle if you do not want them to stay in the original place.. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling.. EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..

12 AN female swivel to 12AN push on hose barb fittings 90 degree. Made of High Performance Lightweight 6061-T6 Billet Aluminum Material. Black Anodized Finish for Durability ang Strength. Excellently Sealed,100 no leaking under high pressure and temperature.Exchange or return free if it's leaked. Universal fit. such as Oil Fuel Water Fluid Air Line.

APPLICATION- EVIL ENERGY 12AN ORB to 12AN Flare adapter is widely used in Oil Fuel Water Fluid Airline Gas hose Ends. The 12AN Male port fit all oil cooler fuel tank fuel pump fluid Line. The fitting has 37-degree AN sealing angle design and another ORB port design assures leak free performance.. ORB adapter uses a male fitting with an o-ring to seal in a female port with an angled section where the o-ring seats. O-ring boss adapter has a straight thread and therefore do not damage the mating part. This fitting seals by the o-ring and the only thing it really needs is a little bit of lubrication on the o-ring, petroleum jelly or some sort of petroleum product such like oil. This design makes the fitting reusable.. Easy to install. Apply a bit of petroleum jelly to o-ring before installation. When installing straight ORB-12 fitting, screw fitting into mating part until preformed packing is fully seated in mating packing seat. Tighten fitting until snug. Check ORB fitting for leakage during system start up. If leaking, loosen connecting tube or hose and tighten ORB fitting. Re-tighten tube or hose.. The ORB fittings are made of high-quality aluminum alloy material for strong strength. Anodized and hand polished finish add the final touch of quality and protection. Black anodized for great appearance and anti-corrosion, superior thread strength. The o-ring is made of NBR, features with excellent oil resistance and heat-resisting Temperature Range -40F to 212F. The adjustable wrench is highly recommended. ORB adapter can be reused and recycle. Due to the high-quality material which makes 12AN ORB fitting worked last for long. Six-month warranty provide by EVIL ENERGY. We value your shopping experience and strive to offer a high-quality product and service..

Two same shapes in one parcel.45 degree, 12AN. WELD-FREE HIGH QUALITY. Material of 6061 Aluminum.. Will work with all AN braided hoses. Not compatible for use with rubber or polytetraflouroethelyene PTFE hoses.. EASY INSTALL - Easy install onto any braided hose with a vice and wrench..

Commonly Used for fabricating custom radiator, reservoir, thermostat housings, or heat exchanger connections.. 37 degree flare fitting automotive standard. Machined aluminum finish. Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum. See thread chart photo in this listing to identify your fitting size.

Product Type Auto Part. Package Dimensions 2.54 Cm L X13.97 Cm W X15.24 Cm H. Country Of Origin China. Package Weight 3.57Lbs.

Designed to be welded to any Aluminum Tank or Surface Like Oil Pans, Fuel Cells, Radiators, Valve Covers, GardenLivestock tanks, Etc.. Made right here in the USA with Certified 6061-T6 USA made Aluminum.. 1-116-12 Threads 1.057 Dia, .625 ID Through Hole, 1.200 Outside Flange Diameter, 1.250 Long with .980 diameter recess to help align it in the hole while welding.. We are an AS9100D and ISO 90012015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.. When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve..