Top 10 Best 134a Refrigerant 30lb

30 LB DOT TANK with a Y valve for liquid and vapor. REUSABLE and is AUS and Transport Canada TC approved and conforms to DOT-4BA400 specs and ARI guidelines. UNPRESSURIZED AND SHIPPED EMPTY with dry air. COMPATIBLE WITH ALL REFRIGERANTS CFCs, HFCs, HCFCs and blends. 100 U. S. assembled and tested.

Up to 10 years' Sensor Life Elitech self-developed this innovated sensor that enormously extends its senor life up to 10 years and also a much more precise result on all halogenated refrigerants than the traditional corona and heat-diode sensors.. High Accuracy Adjustable sensitivity with HighMediumLow levels and the maximum sensitivity is up to 0.14ozyr.. Quick Operation The two corresponding buttons on the front allows quick adjustment to sensitivities or to mute buzzer directly, very easy to operate.. First with TFT Screen World's first leak detector with a TFT screen that gives more clear and easy readings on sensitivities, leakage alerts, battery levels and other key info during operations.. Safe Reliable Strong anti-interference and wide measurement meets EN14624,SAE-162,SAE-2791 and SAE-2913 standards..

50 pound tank. For the 34700 series. These tanks are not filled with Freon, these are empty tanks that refillable.

Dual R134 and HFO1234yf refrigerant recovery and recharge AC machine. Fully Automatic, Enter information and walk away.. Recovery Rate 95. Service all domestic and foreign vehicles including Electric and Hybrid vehicles. Oil injection on non EV and Hybrids. Software control to prevent the injection of wrong oil..

Compact and lightweight, the RG3 features a 40 percent smaller footprint, is easy to carry, and weighs in at just 18 pounds for superior portability. Handles almost all refrigerants - the RG3 works with all common CFC, HFC, and HCFC refrigerants including R-410A. 13 HP, 115V AC, 60 Hz single cylinder, oil-less compressor is capable of recovering both liquid and vapor. High efficiency cross flow design features a fan and condenser layout that is optimized for shorter cycle times. High pressure safety shut-off switch automatically shuts off machine if pressure rises above 550 PSI.

50 LB DOT TANK with a Y valve for liquid and vapor. REUSABLE and is AUS and Transport Canada TC approved and conforms to DOT-4BA400 specs and ARI guidelines. UNPRESSURIZED AND SHIPPED EMPTY with dry air. COMPATIBLE WITH ALL REFRIGERANTS CFCs, HFCs, HCFCs and blends. 100 U. S. assembled and tested. 50 lb. Refrigerant Recovery Tank without Float Switch and 14 FL-M 716-20. Conforms to DOT-4BA400 specs. Y valve liquid and vapor. Reusable. AUS and TC approved.

Robinair's Contaminated Refrigerant Recovery Machine features a durable, compact, portable design that allows the user to recover contaminated refrigerant easily at the vehicle. Proprietary oil-less compressor is capable of handling both liquid and vapor refrigerant 80 tank full shut-off safety harness prevents overfilling recovery tank. Built-in high pressure shut-off switch turns the machine off automatically if the pressure rises above 435 PSI to protect the equipment from potential damage. Self-purge function effectively removes any remaining refrigerant from the machine. Features low-side hoses for R-1234yf and R-134a AC systems, 2-12 inch diameter high and low pressure gauges, inlet filter screen, 103-127 Volt60Hz AC, 12 horsepower motor weighs 32 pounds.

Easy to operate Twin-Cylinder Design provides best-in-class recovery performance and features a rugged case, oversized pressure gauges, comfortable handle, and simple controls. Handles almost all refrigerants - the RG6 works with all common CFC, HFC, and HCFC refrigerants including R-410A. 34 HP, 115V AC, 60 Hz twin-cylinder, oil-less compressor is capable of recovering both liquid and vapor. Equipped with oversized condensers and fan to ensure maximum cooling performance and shorter cycle times. Dimensions-17 L x 9 W x 12 H inches. High pressure safety shut-off switch automatically shuts machine off if pressure rises above 550 PSI self-purge feature eliminates potential for cross-contamination and saves time.

AUTOGEN Single-Stage Vacuum Pump is designed for air conditioning and refrigeration service featuring a single-stage rotary vane design, 12.5-ounce oil capacity, and non-skid feet. 4CFM free air displacement ultimate vacuum 5Pa,13HP, 110V60Hz thermally protected motor. Aluminum alloy casing is used in this kind of machinery that high heat-scattering efficiency, keeping the pump cooler and extending the life. The design of a great starting moment is easy for starting and high efficiency, which can keep it working perfectly even is lower ambient temperature and lower volt. 14 inch SAE and 12 inch ACME inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.

SMAN Manifold Micron Gauge 4 Port. Newly designed SMAN manifold. Replacement for SMAN400 series. Four valve manifold with micron gauge. Toughest, most advanced digital refrigerant manifold on the market.