Top 10 Best 1708 Fiberglass

Same biaxle we used in our production shop. 1708 Biaxial 4545 Degree Threads Backed With 34oz Mat. Used mainly for structural repairs such as doing a transom or stringers on a boat. 1 yard usually takes about a half gallon of resin to wet it out. Note Comes Folded as Shown..

GRADE A-True Composites is a renowned name for its premium product used in the marine industry. CURES FAST-Reach cured quickly-4 hours minimum to 24 hours maximum, based on temperature. APPLICATION For every yard of 50 1708 Biaxial Fiberglass, it takes about half gallon of resin. MULTIPLE APPLICATIONS marine, aerospace, FRP parts, auto body, on wood, fiberglass, or metal. DIY PROJECTS-Perfect for low-cost repairs, Uniform strength and stiffness throughout.

Minimal Print Through - This knitted fabric has a layer of biaxial fiberglass stitched to a 34 oz. chopped strand mat. The - 45 degree biaxial cloth is made of flat, non-crimping fiber bundles for minimal print through.. Add Strength Quickly - The flat non-crimped fibers add greater stiffness than woven fabrics, conform easily and leave a smooth finish.. Multiple Uses - Used for reinforcing, tabbing and repairing boats, car parts, surfboards, canoes and other projects.. Compatible with Epoxy, Polyester and Vinyl Ester Resin - This fabric requires less epoxy resin than other fabrics and provides high strength.. Weight Dimensions - Total weight 25.3 oz. Width 50 inches. 10 Yard Roll..

Very good wet out and high build rate .044. The opposing 45-45 fiber alignment helps prevent twisting. Non-woven construction allows for more conform-ability of the material. Used for boat construction, wind turbine blades, snowboards, skateboards, skis and auto body repair. Higher glass to resin ratio compared to woven roving..

Used by Professionals. Note Comes folded as ahown. This does NOT harm the material..

Use for Print Through barrier between gel coat and woven roving or biaxial.. Can be used alone or with other fibreglass fabrics.. 1.5oz Mat - 50 wide by 60 Feet long.. Uniform strength and stiffness in all directions.. Conforms easier then Woven or Biaxial..

GENERAL PURPOSE - This polyester resin will hold the fiberglass cloth and composite fabrics in place during boat building and layups. For multiple repairs like a bathtub, automotive fiberglass and surfboards among other projects.. FAST WET-OUT - For fiberglass and other reinforcement fabrics. Create composites and FRP parts for cars, motorcycles, yachts, boats, etc. Perfect for spray or apply by hand on fiberglass, wood and metal.. EASY TO USE - This resin is an excellent base coat for laminating applications. Add the MEKP catalyst and use it immediately. The surface stays tacky during the process so the next layer adheres strongly. NO SANDING REQUIRED.. MEKP CATALYST INCLUDED - Adjust the amount of MEKP hardener to control gel time For Slow Gel 20 min use 1 teaspoon of MEKP per quart of resin. For Medium 15-20 min use 2 tspqt. And for Fast 10 min use 3 tspqt.. HANDLING TEMPERATURES - Application 70F - 95F for resin and work area. Storage below 77F. Use Fiberglass Warehouse Polyester Finishing Resin for the final layer in your layup..

Double Bias Fabrics are non-wovens. These consists of two layers that are stitched together.. RECOMMENDED FOR EPOXY RESIN. Superior strength to Woven Cloth. Consumes less Resin and Wets-Out with little effort. May be rolled and folded. This does NOT harm the product. Folding is common in production..