Top 10 Best 3/8 Fuel Line Hose

Size SAE30R6 KX Date Made in USA. Reinforced with two spiral polyester. Color Black.

Nitrile tube that is spiral reinforced for enhanced durability. NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments. Vacuum rating of 24 inHg for sizes less than 12 in I.D., and 10 inHg for sizes 12 in to 34 in I.D. at ambient temperatures. Warning Do not use for pressure lines on fuel injected engines or for cooling system applications. Use an ACDelco Specialty Premium Fuel Injection Hose MPI for fuel injection applications. Intended for use with fuels where MTBE concentrations are no greater than 15 by volume.

Size ID 38inch 10mm,OD 23inch17mm. Material NBR.. Working Pressure 290psi. Burst Pressure 1160psi. Temperature Range -40F to 257F. Minimum Bend Radius 3.9inch100mm.. Applicable Medium 38 id fuel line can work with dieselbiodieselgasolineOilgreasewater and air,etc.. Application SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, PCV system, please check size and application pressure before purchase.. EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..

5 Foot Piece of 38 ID Black Rubber Fuel Line Made in the USA. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines. Nitrile Tube Construction with 2 Spiral Polyester Reinforcement and PVCNitrile Blend Cover. Designed for Conveying Gasoline E85 and Diesel Fuel. Temperature Resistant from -40 Degrees Fahrenheit to 212 Degrees Fahrenheit.

Package length18.2 cm. Package width17.8 cm. Package height17.0 cm. Product TypeAUTO PART.

Multi-fuel compatibility. Extremely low permeation rate. HNBR tube with thermoplastic barrier, aramid fiber reinforcement and CPE cover. Oil, heat, ozone, and abrasion-resistant cover. Meets SAE 30R14 T2 except for kink resistance, CARB and EPA non-road fuel lines.

2-spiral synthetic reinforcement. SAE 30R7. Not for fuel injection systems. Length 1.6 clamshell, 2 clamshell, 25 spool, 50 carton, 250 reel.

Application for racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil coolant etc. Inner Diameter 8.73 mm 0.34 inch, Outer Diameter 14.22 mm 0.56 inch. Working Temperature -40F to 300F. Working pressure 500 PSI. Burst pressure 2000 PSI. Note Double check the hose size before bidding. Our rubber hose should compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT..

ID 38 inch, OD 58 inch, 6 AN NBR liner hose oil engine liner, 10 FT. Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines. Working Pressure 2Mpa. Burst Pressure 6Mpa, Handles temperature ranges of -40 to 275 degrees F. Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc. The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance.

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Safety Features For Your Protection Fuel Hose SizeID 6AN, Length 20FT, Working Temperature -100 to 500 -73C to 260C , Pressure Tolerance 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Includes 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..