Top 10 Best 3m Splice

UL Listed for 600 volts in direct bury applications, UL 486D approved. Twist-on design for quick connection. Use for appliances, fixtures, automotive, marine commercial, industrial, residential construction. Delivers uniform holding power. Withstands temperatures up to 221F 105C. Not recommended for long-term continuous submersion.

Auto Stripping Auto Tap Insulated Connectors. Make Inline Pigtail and Tap Splices on Solid or Stranded Wire. Install Faster and Easier with a Standard Pair of Pliers.

USA MADE - Filled with Water Proof Dow Corning SP4577 Dielectric Silicone. Maximum Wire Gauge 10 AWG - Minimum Wire Gauge 18 AWG Features. vIndustry Leading Volume Resistivity at 73F 23C ohmcm 2.17 x 1015. Industry Leading Dielectric Strength, 50 mil gap voltsmil 450. Maximum Voltage 600v.

Grease-filled tube moisture seals the connection for direct-burial and water intensive applications. UV-resistant polypropylene tube and steel spring OB connector withstand wet underground conditions. Ideal for moisture applications like golf courses, irrigation controls and outdoor lighting. Splice kit electrically connects 2 or more pre-stripped 18-12 AWG copper wires. Rated for applications up to 600V. Maximum operating temperature of 221F 105C. Includes 3M Performance Plus wire connector OB and UV-resistant, high-impact grease-filled tube.

Moisture-proof electrical connection for type UF-B underground feeder. Designed for use with non-shielded cables. Heavy-wall tubing for high level of moisture protection. 4 cylindrical set screw connectors separated by a piece of vinyl insulation. Rated for 600V applications. Withstands a temperature range of -67 to 230 degrees F -55 to 110 degrees C.

High performing polypropylene insulation ensures there are no shorts making it ideal for complex circuits when used for parallel splicing or a tap wire. Makes it simple to connect a tap wire to a run wire electrically via a self sealing and self stripping design. Its design lets you use it with 18 to 16 AWG solid or stranded wire for taps or 14 AWG stranded for runs. Easy conductivity is assured thanks to the brass element construction and it's plated with tin for powerful corrosion resistance. Use it in buildings with circuits rated up to 600V or use it with fixtures signs or luminaires rated up to 1000 Volts for maximum flexibility.

UL Listed for 600 volts in direct bury applications, UL 486D approved. Twist-on design for quick connection. Use for appliances, fixtures, automotive, marine commercial, industrial, residential construction. Delivers uniform holding power. Withstands temperatures up to 221F 105C. Not recommended for long-term continuous submersion.

Made in the USA. 3 Wire Splice Kit for 10-12-14 AWG for Direct Burial wire splicing with Outer Sleeve. Contains 3 x Clear 3M Shrink Tubes and 3 x 3M Copper Butt Connectors and 8 3M long 1.1 Black shrink dual wall tubing. Made with 3M Clear and Black dual wall Shrink Tubing and Electrolytic seamless Copper connectors. WaterWeather Proofing of broken wire. Repair With Ease and Confidence.. Ease of use - Use a simple Crimping tool and Shrink the tubes using Heat gun or a propane torch..

4 Wire Splice Kit for 10-14 Gauge Direct Burial wire splicing with Outer Sleeve. 3M Clear Tubing - Seeing is believing for a Perfect SEAL every time.. 3M Seamless Butt Connectors - Annealed and Electro-tin Plated - Perfect CRIMP every time.. 3M Black OUTER SLEEVE - UV and Extra Protection..

Contains 3 x Clear 3M Shrink Tubes and 3 x Copper Butt Connectors and an 8 long .8 black dual wall shink tubing.