Top 10 Best Ade

Compact, pocket size makes it great for traveling. with fixed slit fixed focus. Length 2.2 inch. Bring it with you on buying trips, vacations, or to trade shows. When white light travels though a stone, one or more of wavelengths that produce color are absorbed. Made of aircraft aluminum and finest optics..

This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dotthis one and FDETAN body 4MOA Red dot.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots.. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.. Included in the package are essential accessories to enhance your experience a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately..

Ade Stingray is Designed to to the smallest and lightest GREEN dot to fit any pistol mounting plateslidecut that is compatible with RMRSRO, HS407C507C508T footprint red dots. The overall length is around 15-20 shorter than other major competitors. The shorter design allow this sight to be able to sit in to all optic cutsplatesadapters that designed for RMR. For some optics ready pistols with a large optic cut, there will be a gap between the optic rear dot and pistol rear iron sight.. Ade Stingray created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the GREEN dot to become a back up iron sight. With the ultra short design, the GREEN dot provides a distancegap on some of full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacture equipped rear sight, ADE Stingray's rear white dot will acts as a pistol factory original rear sight for Co-Witness. Does NOT fit optic platecut made for Doctor type footprint. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. One year battery life with a single CR2032 batteryincluded. ADE Stingray GREEN dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. Just like 400 RMR competitors, It does not has a onoff power button. The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be sleeping in a very very low power mode. Weight approximately .88oz25grams. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. 6 MOA GREEN dot. Length1.6 x Width1.1 x Height.93. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Stingray's rear white dot will act as a pistol factory original rear sight for Co-Witness..

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots. This ADE Artemis is FDEFlat Dark Earth body color. Please note, different manufacturer made their own FDE proprietary, there is no industrail standard FDE color. The FDE color on this ADE red dot will not 100 match a different manufacturer's FDE, but it will look great. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Artemis. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery..

Optic Shim is made to fit between the red dot and the mounting plate.. Fits Shield RMSRMSCRMSWSMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Scope base shims Tolerance -.005 Taper 1.0 degree. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree.. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear..

Designed for Smith and Wesson MP Shield 9mm.40 Pistol with Optic Cut space for keeping the red dot installed for every day carry. The holster is also custom and precisely molded for a space for the pistol with Streamlight TLR6 installed under the barrel. Does NOT fit MP9, Does NOT fit EZ. The laserflashlight space is custom molded for Streamlight TLR6 ONLY, it does NOT fit any other laser sight such as Olight, Streamlight TLR2. The holster might be able to accept some other laserflashlight but may NOT be able to lock firmly. We do NOT recommend using any other laserflashlight with this ADE Holster. The optic cut space is compatible with all major compact red dot sights on the market, such as Shield RMSRMSCRMSWSMS, Sig Saure Romeo Zero, JP Enterprises JPoint, Swampfox Sentinel, ADE RD3, Leupold Delta Point Pro, Vortex VenomViper, Trijicon RMRSRO, Deltapoint Pro, Vector Optics Frenzy.. Thick .08 Kydex material that is strong, durable, and molded specifically for your weapon. Adjustable Retention so you can get the perfect fit. Package includes holster plus hex adjustment tool.. Fully covers trigger and backside of gun, providing safety and protection from sweat. Adjustable Cant From -5 to 20 Degrees This slight adjustment from -5 to 20 degrees will help angle your holster perfectly for ApprndixAIWB, Strong Side, Behind The Hip or Cross Draw. Fits 1.5 Width Belt.

Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.. Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero.. Fits Vortex Venom Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Also Fits Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red dots, if so, simply trim cut the hole bigger. Does NOT fit Trijicon rmr, Shield, Sig Romeo, Holosun red dots. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree..

Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail. For pistols that does NOT has a raildovetail slot under the barrel such as Sig P365, user need to obtain a rail adapter for the laser to fit.. Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Operates with one CR13N batteriesincluded. Battery life 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm. Controlled by ambidextrous switch. It offers two modes constant-on and strobe. This allows the user to easily set their mode based on personal need or preference.

This FDETAN body color RED Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADEs popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADEs FDE color will not 100 match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter.. This ADE RD3-012 Red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting platesSOLD SEPARATELY that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plateSOLD SEPARATELY.. It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided 1 mount, however the front switch of the sight needs to trim down 2mm.. Comes with battery, protective cover, M3x6mm screws for connecting to the provided picatinny plate, picatinny plate, lens cloth, wheel dial reference tool, allen wrench, screw driver, anti-flickering robber shim.. Top load System, no need to Remove the sight to change the Battery. ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-018 only Fits RMSRMSC footprint. RD3-019,RD3-020,RD3-023 fits RMR footprint. While it is possible to install the optic to handgun without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and lockable elevation adjustments. Weight approximate 1.6oz.. 6 MOA red dot..

Machined from lightweight, extremely durable 7075 aluminum, Mil-Spec hard anodized. Same height above bore as standard-issue sights. Low-profile sights extend only .2 above top rail, don't interfere with primary optics or military IR illuminator laser sight. Ambidextrous sights easily and securely mount to Picatinny rails using a flathead screwdriver. .50 MOA elevation and windage adjustments. Rear sight3oz Front sight1.5oz.

Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail. Exquisite, compact and lightweight design, convenient to carry around. Only weight 2.72oz. Length 2.4 inch. 400 Lumen Cree bright white flashlight operates with a single CR2 batteryINCLUDED. Anodized aviation aluminum alloy and weather-proof body design. The White light illuminator will not hamper performance or shooter skill.

This Listing comes with the optic sight, a Picatinny Mounting Plate and a Pistol plate for Ruger Security 9 full size and Ruger Security 9 compact size pistols by replacing factory rear sight. This pistol plate does NOT fit any other pistol models such as Ruger SR9, SR40, SR Series and any other pistols. Installing the aftermarket optic plate is not simply plug and play. We recommend having a qualified gunsmith to install.. The ADE Delta PROD3-012PRO has Motion Activated System technology. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.. Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic platecut that is compatible with DoctorVortex VenomBurris Fastfire footprint. 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn onoff the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press UpDown switches to adjust brightness.. ip67 Waterproof, ShockFog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..

Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero. Optic Shim is made to fit between the red dot and the mounting plate.. Fits Trijicon RMRSRO, Ade Advanced Optics, RD3-019, RD3-020, RD3-023, Holosun HS407CHS507CHS507T and. Also fits Riton X3 Tactix PRD, ADE RD3-011, Swampox KingslayerLibertyJustice. The shim might need to be trimmed to the shape to match some of red dot brand mentioned above.. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree.. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear..

One scale checks the NaCl levels with the range of 0-100 ppt with 1 ppt scale divisions and the other scale gauges Specific Gravity with a range of 1.000 to 1.070-0.001 accuracy. Features ATC Automatic Temperature Compensation for accurate readings.. Sturdy design, compact in size and light in weight, convenient to keep up and carry around.. It is suitable for a marine saltwater tank.. This Refractometer is backed by a 2 Year - No Hassle - Free Replacement Guarantee..

Greatly reduces the chance of your red dot battery losing connection resulting in flickering or temporary loss of your RMR's reticle. The Rubber Plate create upward pressure ensuring a reliable battery connection.. Allows the red dots that have exposed electrics at the bottom coveredprotected. Works with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. 100 MONEY-BACK warranty within 30 days of purchaseNO QUESTIONS ASKED. LIFETIME WARRANTY.

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide with optic cut.. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex venomviper, burris fastfire, meopta, shield, docter, insight Red dots.. This optic mounting plate also fits other red dot brands such as Vortex VenomRazorViper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmrholosunshield footprint red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury..

Wrong Inventory fixed, customer will receive correct footprint for RMS, not RMR. This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-018 SPIKE, RD3-021 Nuwa, RD3-030 Apollo, Shield RMSRMScRMSwSMS and Romeo Zero Red dot sights.. Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel, Vortex Defender-CCW, Bushnell RXC-200 Ultra-Compact red dot sights. Finished in a Matte Black Anodize. Comes with two screws. Does NOT compatible with Holosun 407k507k, user MUST grindlots of grinding to completely REMOVEFlat out the two rear pin to fit 407k507k. Ade has is releasing a new plate made specifically for 407k507k, please search amazon item numberAsin B09TMPGHRL.

ELECTROLYTES AND SMART CARBS Nakedade contains PalatinoseTM, a smart carbohydrate derived from sugar beets. Nakedade acts different from other electrolyte drinks because during the manufacturing process, we isolate the sucrose and remove the fructose and glucose.. MAINTAIN ENERGY BOOST PERFORMANCE Palatinose TM in Nakedade improves fat oxidation during longer training sessions, which means your body is more efficient in using fat as an energy source. Each serving also provides 285mg of potassium to replenish electrolytes lost through sweat for optimal hydration and muscle function.. CLEAN NUTRITION Gluten-free and vegan electrolyte hydration packets made from natural premium ingredients. Nakedade is Non-GMO and contains no artificial sweeteners, flavors, or colors. Soy-free, dairy free.. EASY TO USE Our strawberry lemonade flavored smart carb hydration powder packets are convenient for the gym, outdoors, or home workouts. Refreshing taste and mixes easily in water.. THE IDEAL SPORTS DRINK Use Strawberry Lemonade Nakedade electrolytes powder packets as a post workout recovery drink or during exercise as a sports drink, hydration supplement, and performance enhancer..

Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HG54G laser which takes non-rechargeable battery. This new HG54G RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries. Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output. Ultra lightweight and compact 1.79L x 1.06W x .85H. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail. Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included.Does NOT fits Berreta due to extra wide trigger guard.. Operates with one CR13N batteriesincluded. Battery life 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm. Controlled by ambidextrous switch. It offers two modes constant-on and strobe. This allows the user to easily set their mode based on personal need or preference.

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HG54G laser which takes non-rechargeable battery. This new HG54G RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries. Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output. Ultra lightweight and compact 1.79L x 1.06W x .85H. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

ADE Rd3-002 red dot is the entry level red dot that comes with a built-innon removeable picatinny base. It can only be mounted on the pistols that has a picatinny rail on top. It does NOT works with pistols that does NOT has a picatinny rail on top.. The Build-in picatinny mount CAN NOT be removed and replace with a handgun mounting plate. For red dot sight made to attach pistol mounting plate such as Optics Ready pistols, or mounting plates to replace rear sight, please see ADEs other models such as RD3-006,RD3-009,RD3-012,RD3-013,RD3-015. Unlimited Eye Relief, 2 MOA Red Dot, PolishedCoated lenses, Parallax Free. ANODIZED ALUMINUM BODY. LED LIGHT EMITTING DIODE. Manual power switch at rear end. OffLowHigh. Only weight 1.9oz with battery installed.. Fully Multi-Coated Multiple anti-reflective coatings on all air-to-glass surfaces increase light. RD3-002 is Not recommended for heavy recoil firearm..

Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery. The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately.

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.. It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided 1 mount, however the front switch of the sight needs to trim down 2mm.. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt.

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots.. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.. Included in the package are essential accessories to enhance your experience a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately..

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots. This ADE Artemis is FDEFlat Dark Earth body color. Please note, different manufacturer made their own FDE proprietary, there is no industrail standard FDE color. The FDE color on this ADE red dot will not 100 match a different manufacturer's FDE, but it will look great. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.. Included in the package are essential accessories to enhance your experience a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately..

ADE is releasing the 2023 PRO SERIES for ADE RD3-0152016-present Zantitium red dot called Zantitium PROD3-015PRO. The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.. The ADE Zantitium Red dot sight is the biggest handgun sight on the market Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.. The size of the red dot is about 30 longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sightwill keep the rear sight to co-witness the red dot, such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slidenot in the pre-cut.. The ADE Zantitium PROD3-015PRO has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR2032 battery. Press and Hold the DOWN switch for 3 seconds to manually turn onoff the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press UpDown switches to adjust brightness.. Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight DOES NOT FIT OPTICS READY PISTOL WITH CUT that is compatible with DoctorVortex VenomBurris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.. 2.25 Length x 1.4 Width x 1.27 Height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light..

The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield. Can also be used with a long range rifle scope for that perfect Backup System. The onoff switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 batteryIncluded.

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

ADE is releasing the 2023 PRO SERIES for ADE RD3-0122016-present Delta red dot called Delta PROD3-012PRO. The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.. Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic platecut that is compatible with DoctorVortex VenomBurris Fastfire footprint. Does NOT fit optic platecut for RMR, Shield RMS type footprints.. The ADE Delta PROD3-012PRO has Motion Activated System. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn onoff the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press UpDown switches to adjust brightness.. 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light..

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots. This ADE Artemis is FDEFlat Dark Earth body color. Please note, different manufacturer made their own FDE proprietary, there is no industrail standard FDE color. The FDE color on this ADE red dot will not 100 match a different manufacturer's FDE, but it will look great. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.. Included in the package are essential accessories to enhance your experience a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dotthis one and FDETAN body 4MOA Red dot.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded. Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness..

Comes with an removable standard picatinny mount and handgun mountreplace rear sight fits CERTAIN SW models such as Smith Wesson MP Full Size, MP 2.0 Full Size, MP 22 Full Size, MP Compact, MP 2.0 Compact, SD9VE,SD40VE, MP Shied. The pistol mount included for SW does NOT fit Smith Wesson MP C.O.R.E Series Already optics ready, MP Shield EZ .380, MP .22 Compact, SW9VE, SW40VE, SW40, SW9, Sigma, 1911. 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click. The red dot is also compatible with Ade handguIt is designed to fit the slidefootprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate..

This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn bright up and one to turn down. Hold the down button for 3 secs to power off. Every time you turn on the dot it stays the same brightness level last time it was turned off. Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It does NOT fit standard glock, or glock with a aftermarket slide.If you have an aftermarket Glock slide, please ask the slide manufacturer what exact optic cut they put on their glock slide and let us know for us to confirm which red dot fits.User need to contact pistol manufacturer to obtain the optic plate for OPTIC READY handgun.. This ADE red dot is NOT compatible with optic plateslidecut for trijcon rmrShieldHolosun 407 type footprint. It only compatible with footprint made for Vortex VenomBurris Fastfire type red dot platefootprint. Top load System, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo.. GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. For Non-Optics Handgun,user need to purchase after market Optic Plate made specifically for that pistol to replace the rear sight.This Green Dot comes with a removeable Picatinny plate ONLY. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately.

We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.. WaterproofShockFog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 batteryIncluded. Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..