Top 10 Best Ade Advanced Optics

One scale checks the NaCl levels with the range of 0-100 ppt with 1 ppt scale divisions and the other scale gauges Specific Gravity with a range of 1.000 to 1.070-0.001 accuracy. Features ATC Automatic Temperature Compensation for accurate readings.. Sturdy design, compact in size and light in weight, convenient to keep up and carry around.. It is suitable for a marine saltwater tank.. This Refractometer is backed by a 2 Year - No Hassle - Free Replacement Guarantee..

Comes with mounting plate that replaces the rear sight dovetail of Sig P226, P2022 and also a standard picatinny mount. The plate does NOT fits other Sig models such as P320 and P360. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 BatteryIncluded. Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slidefootprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.. Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.. 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots. This ADE Artemis is FDEFlat Dark Earth body color. Please note, different manufacturer made their own FDE proprietary, there is no industrail standard FDE color. The FDE color on this ADE red dot will not 100 match a different manufacturer's FDE, but it will look great. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.. Included in the package are essential accessories to enhance your experience a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately..

ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Fits 1 riflescope tube. Mounting rings are pushed forward 2 for better eye relief.. Designed for mil-spec upper receivers with 1913 Picatinny rail. Designed for mil-spec upper receivers with 1913 Picatinny rail. Superior clamping surface to insure maximum rail engagement. Does not require proprietary tools for adjustment. Height 1.5. Weight 4.2oz. Screw Torque - 15 in-lbs. Ade Limited Life Time Warranty..

Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail. Exquisite, compact and lightweight design, convenient to carry around. Only weight 2.72oz. Length 2.4 inch. 400 Lumen Cree bright white flashlight operates with a single CR2 batteryINCLUDED. Anodized aviation aluminum alloy and weather-proof body design. The White light illuminator will not hamper performance or shooter skill.

Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero. Optic Shim is made to fit between the red dot and the mounting plate.. Fits Trijicon RMRSRO, Ade Advanced Optics, RD3-019, RD3-020, RD3-023, Holosun HS407CHS507CHS507T and. Also fits Riton X3 Tactix PRD, ADE RD3-011, Swampox KingslayerLibertyJustice. The shim might need to be trimmed to the shape to match some of red dot brand mentioned above.. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree.. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear..

Ade Stingray is Designed to to the smallest and lightest red dot to fit any pistol mounting plateslidecut that is compatible with RMRSRO, Holosun 407C507C508T footprint red dots. The overall length is around 15-20 shorter than other major competitors. The shorter design allow this sight to be able to sit in to all optic cutsplatesadapters that designed for rmr. For some optics ready pistols with a large optic cut, there will be a gap between the optic rear dot and pistol rear iron sight.. Ade Stingray created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some of full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacture equipped rear sight, ADE Stingray's rear white dot will acts as a pistol factory original rear sight for Co-Witness. Does NOT fit optic platecut made for Doctor type footprint. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. One year battery life with a single CR2032 batteryincluded. ADE Stingray GREEN dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. Just like 400 RMR competitors, It does not has a onoff power button. The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be sleeping in a very very low power mode. Weight approximately .88oz25grams. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. 6 MOA RED dot. Length1.6 x Width1.1 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Stingray's rear white dot will act as a pistol factory original rear sight for Co-Witness..

Designed for Sig P365P365 SASP365XP365XL Pistol with Optic Cut space for keeping the red dot installed for every day carry. The holster is also custom and precisely molded for a space for the pistol with Streamlight TLR6 installed under the barrel.. The laserflashlight space is custom molded for Streamlight TLR6 ONLY, it does NOT fit any other laser sight such as Olight, Streamlight TLR2. The holster might be able to accept some other laserflashlight but may NOT be able to lock firmly. We do NOT recommend using any other laserflashlight with this ADE Holster. The optic cut space is compatible with all major compact red dot sights on the market, such as Shield RMSRMSCRMSWSMS, Sig Saure Romeo Zero, JP Enterprises JPoint, Swampfox Sentinel, ADE RD3, Leupold Delta Point Pro, Vortex VenomViper, Trijicon RMRSRO, Deltapoint Pro, Vector Optics Frenzy.. Thick .08 Kydex material that is strong, durable, and molded specifically for your weapon. Adjustable Retention so you can get the perfect fit. Package includes holster plus hex adjustment tool.. Fully covers trigger and backside of gun, providing safety and protection from sweat. Adjustable Cant From -5 to 20 Degrees This slight adjustment from -5 to 20 degrees will help angle your holster perfectly for ApprndixAIWB, Strong Side, Behind The Hip or Cross Draw. Fits 1.5 Width Belt.

Precision CNC Machined from Aircraft Grade Aluminum. This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-018 SPIKE, Shield RMSRMScRMSwSMS and Romeo Zero Red dot sights.. Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel red dot sights. Does NOT compatible with Holosun 407k507k, user MUST grindlots of grinding to completely REMOVEFlat out the two rear pin to fit 407k507k. Ade has is releasing a new plate made specifically for 407k507k in March 2022. Finished in a Matte Black Anodize. Comes with two screws.

This is a pair of Medium Profile riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The scope ringpair has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.535. Weight 3.37oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

This is a pair of Low Profile riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The scope ringpair has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.41. Weight 3.34oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots. This ADE Artemis is FDEFlat Dark Earth body color. Please note, different manufacturer made their own FDE proprietary, there is no industrail standard FDE color. The FDE color on this ADE red dot will not 100 match a different manufacturer's FDE, but it will look great. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.. Included in the package are essential accessories to enhance your experience a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately..

Fits all Railed weapons weaverpicatinny Some weapons may require an adapter like HK and Sigma series pistols, some sig sauer pro series. Very compact and light Aluminum Construction 532nm Green Laser Beam 5mw. Quick Release System Attaches to Most Weaver StylePicatinny Rails. Fully Adjustable Laser for Windage and Elevation. Operates with a single CR2 batteryincluded.

Ade Stingray is Designed to to the smallest and lightest GREEN dot to fit any pistol mounting plateslidecut that is compatible with RMRSRO, HS407C507C508T footprint red dots. The overall length is around 15-20 shorter than other major competitors. The shorter design allow this sight to be able to sit in to all optic cutsplatesadapters that designed for RMR. For some optics ready pistols with a large optic cut, there will be a gap between the optic rear dot and pistol rear iron sight.. Ade Stingray created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the GREEN dot to become a back up iron sight. With the ultra short design, the GREEN dot provides a distancegap on some of full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacture equipped rear sight, ADE Stingray's rear white dot will acts as a pistol factory original rear sight for Co-Witness. Does NOT fit optic platecut made for Doctor type footprint. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. One year battery life with a single CR2032 batteryincluded. ADE Stingray GREEN dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. Just like 400 RMR competitors, It does not has a onoff power button. The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be sleeping in a very very low power mode. Weight approximately .88oz25grams. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. 6 MOA GREEN dot. Length1.6 x Width1.1 x Height.93. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Stingray's rear white dot will act as a pistol factory original rear sight for Co-Witness..

Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output. Ultra lightweight and compact 1.79L x 1.06W x .85H. Fit rail-equipped pistols, rifles and shotguns. The Green laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Operates with one CR13N batteriesincluded. Battery life 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm. Controlled by ambidextrous switch. It offers two modes constant-on and strobe. This allows the user to easily set their mode based on personal need or preference.

Designed for Glock 19 19X 23 32 45 Pistol with Optic Cut space for keeping the red dot installed for every day carry. The holster is also custom and precisely molded for a space for the pistol with Olight Baldr Mini installed under the barrel.. The laserflashlight space is custom molded for Olight Baldr Mini ONLY, it does NOT fit any other laser sight such as Olight PL-Min, Baldr Pro, Streamlight. The holster might be able to accept some other laserflashlight but may NOT be able to lock firmly. We do NOT recommend using any other laserflashlight with this ADE Holster. The optic cut space is compatible with all major compact red dot sights on the market, such as Shield RMSRMSCRMSWSMS, Sig Saure Romeo Zero, JP Enterprises JPoint, Swampfox Sentinel, ADE RD3, Leupold Delta Point Pro, Vortex VenomViper, Trijicon RMRSRO, Deltapoint Pro, Vector Optics Frenzy.. Thick .08 Kydex material that is strong, durable, and molded specifically for your weapon. Adjustable Retention so you can get the perfect fit. Package includes holster plus hex adjustment tool.. Fully covers trigger and backside of gun, providing safety and protection from sweat. Adjustable Cant From -5 to 20 Degrees This slight adjustment from -5 to 20 degrees will help angle your holster perfectly for ApprndixAIWB, Strong Side, Behind The Hip or Cross Draw. Fits 1.5 Width Belt.

Ade Advanced Optics Compact RD3-009 Red Dot Reflex Sight that replaces the rear sight dovetail of SR22 Pistol and also a standard picatinny mount.. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 BatteryIncluded. Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slidefootprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.. Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.. 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.

Tactical Super bright 200 Lumen CREE LED bulb. With a Quick Detachable Weaver Style Mount, you can quickly install and remove Flashlight in seconds and mount it onto virtually any of your firearms without the use of tools.. Perfect Size For Compact Pistols And Also Fits Fullsize Pistols. Can also be used on rifles and shotguns with picatinnyweaver rail systems. Constructed of Solid Anodized Aluminum. Low battery consumption.

Newly release for Shotshow by Ade Advanced Optics. Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HR54 laser which takes non-rechargeable battery. This new HR54 RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries. The built-in rechargeable battery is removable and can be purchased direct from ADE for replacement.. Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output. Ultra lightweight and compact 1.79L x 1.06W x .85H. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

Optic Shim is made to fit between the red dot and the mounting plate.. Fits Shield RMSRMSCRMSWSMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Scope base shims Tolerance -.005 Taper 1.0 degree. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree.. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear..

This mounting plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 2245 pistol. For Mark I and II, confirm it has drilledtapped holes. Plate will not work without holes.. Mounting hardware comes with screws and allen wrench. For Mark I and II, confirm it has drilledtapped holes. Plate will not work without holes.. Also fit Doctor, Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots.. Mounting hardware comes with screws and allen wrench. We are learning that depending on the date of production batches of the ruger mark series, some pre-drilled holes are slightly shortershallower. If so, please contact us, we will send you shorter screws. We are in the process of adding shorter screws, but it is not factory included til next production.. This optic plate is designed to attach to the two existing holes on the top of Ruger Mark Slide. No need to replace the rear sight and allowing user to co-witness the rear sight..

This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn bright up and one to turn down. Hold the down button for 3 secs to power off. Every time you turn on the dot it stays the same brightness level last time it was turned off. Does NOT fit the new HELLCAT OSP. Fits directly on Springfield XDM XD-M OSP system with the 1 mount that comes with OSP without needing to remove the rear sight. This optics does NOT fit XDMXDXDS, it only fits XDM OSP models which are the springfield's newest Optics Ready Pistols.. Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo.. GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately. This listing only comes with a picatinny plate.If user has a Springfield OSPoptics ready model that has a optic cut in front of the rear sight, user need to obtain Springfield provided 01 plate.The springfield official Sku is XD5071, you can obtain that plate from springfield for free. If user has a Non-OSPnon-optics ready XD, XD MOD.2, XDM, XDS Pistol, user need to purchase an aftermarket optic plate to replace the rear sight, please search amazon Item Number B087H5GHCR for the plate..

Comes with an ADE RD3-006 GREEN dot sight, a picatinny platepre-assembled, and a optic mounting plate designed to fit Ruger American Pistol and Ruger American Compact Pistol by replacing the factory rear sight.. Only fits RUGER AMERICAN PISTOL. This plate does NOT fit any other ruger pistols such as Ruger SR9, SECURITY 9.. The optic plate for RUGER AMERICAN PISTOL requires removal the rear sight, disassemble the pistol. Gunsmith experience is required. we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque12inlb will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. This ADE RD3-006 GREEN dot comes with a picatinny mounting plate pre-assembled might be packaged separately in the retail package, depends on the ADE model. Please use the allen wrench provided to take out the 2 hex screwsM3x6mm on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates. 4 MOA. Operates with a single CR2032 batteryinstalled underneath. Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01H x 1.9L x 1.1W. The green dot comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim. Full metal construction with glass lens. No plastic body, no plastic lens..

Ade Advanced Optics mount also provides a larger surface area allowing stable mounting on uneven surfaces.. Color White. Comes with wall plate and an 30 degree angled mount. Made with Ade Advanced Optics military grade polymer.. This plate covers up any marks or holes of your old doorbell nicely. No need to paint or do any remodeling work The angle mount is designed at 30-degrees for a change in view that is sometimes needed.. The plate is easily installed to fit perfectly with your Nest Hello Doorbell and is compatible with the adjustable wedge.You can add Nest original 15 degree Wedge with this 30 degree angled mount for a complete 45-degree change in the viewing area. Mounting screws are included.. Our product comes with an extended 1 year breakage warranty. Rest easy knowing that we created this product to last a lifetime..

Designed for Smith and Wesson MP Shield 9mm.40 Pistol with Optic Cut space for keeping the red dot installed for every day carry. The holster is also custom and precisely molded for a space for the pistol with Streamlight TLR6 installed under the barrel. Does NOT fit MP9, Does NOT fit EZ. The laserflashlight space is custom molded for Streamlight TLR6 ONLY, it does NOT fit any other laser sight such as Olight, Streamlight TLR2. The holster might be able to accept some other laserflashlight but may NOT be able to lock firmly. We do NOT recommend using any other laserflashlight with this ADE Holster. The optic cut space is compatible with all major compact red dot sights on the market, such as Shield RMSRMSCRMSWSMS, Sig Saure Romeo Zero, JP Enterprises JPoint, Swampfox Sentinel, ADE RD3, Leupold Delta Point Pro, Vortex VenomViper, Trijicon RMRSRO, Deltapoint Pro, Vector Optics Frenzy.. Thick .08 Kydex material that is strong, durable, and molded specifically for your weapon. Adjustable Retention so you can get the perfect fit. Package includes holster plus hex adjustment tool.. Fully covers trigger and backside of gun, providing safety and protection from sweat. Adjustable Cant From -5 to 20 Degrees This slight adjustment from -5 to 20 degrees will help angle your holster perfectly for ApprndixAIWB, Strong Side, Behind The Hip or Cross Draw. Fits 1.5 Width Belt.

This brand new designed optic mounting plate made by ADE is to REPLACE the rear sight of certain Steyr A1 and A2 Handgun.. This Optic Plate is Compatible with S-A1 C-A1 M-A1 L-A1 M9-A1, L9-A2, C9-A2, M9-A2. Does NOT fit any other models that is not listed here.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation..

Designed for Colt 1911 such as -22 to fit Ade rd3-001, rd3-02, rd3-009 and similar style mini Red dot sight such as sight mark mini shot reflex sight. It fits Colt 1911. Covered under Warranty for life. Made using the highest quality materials. Attaches firmly to your firearm for sure performance in tactical situations. Replaces the Picatinny mount packaged with the Red dot sight.

This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith Wesson handguns. This mounting plate fits SW Smith Wesson MP Full Size, MP 2.0 Full Size, MP 22 Full Size, MP Compact, MP 2.0 Compact, SD9VE,SD40VE, MP Shield. This mounting plate does NOT fit Smith Wesson MP C.O.R.E Series Already optics ready, MP Shield EZ .380, MP .22 Compact, SW9VE, SW40VE, Sigma. This mounting plate fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..

Precision Machined Out of Premium 6061 Aircraft Aluminum. Single Weaver-style 30mm scope adapter. Lets you mount such accessories as red dot sight, laser, or flashlight. Measures 1.77 inches long Weighs 0.7 ounces. Standard with four sided hexbolts for maximum hold under extreme conditions and automatic weapons fire.

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. For using on ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with two M3x6mm screws.

8 Kinds of Reticle 5 adjustable brightness settings. Quick detach pica tinnyweaver mount. 1MOA Low power consumption for long battery life. Quick detach mounting system. Aluminum Body with metal protective shield. Unlimited eye relief. Water-resistant and shockproof. Parallax corrected. Wide field of view. Dimension108x53x62mm. Weight8.6oz. Compatible with magnifiers or NVGs. Clocking Wind ageElevation adjustments. The Graphic Figure on the manual comes with the product. Built-in Rechargeable Battery with Charging indicator light. Light automatically turn off after fully charged. Charging cable included. The universal battery part number is LIR2023.

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots. This ADE Artemis is FDEFlat Dark Earth body color. Please note, different manufacturer made their own FDE proprietary, there is no industrail standard FDE color. The FDE color on this ADE red dot will not 100 match a different manufacturer's FDE, but it will look great. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Artemis. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery..

Comes with a Picaitnny mounting plate. Also comes with ADE all new designed adapter plate is to REPLACE the rear sight for Sig Sauer STANDARD P320 Handgun. The P320 Plate that comes with this listing Only fits standard P320. It does NOT fit special edition like XCarry, X-5, XCompact and M17. Delta RD3-012 Red dot. Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate.. 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and elevation adjustments. Two button adjustments. One UP ARROW and one down ARROW to adjust brightness. Press and hold Up Arrow for 3 secs to power on, and hold Down Arrow for 3 secs to power off..

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots.. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.. Included in the package are essential accessories to enhance your experience a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute Cowitness level.. Compatible with ADE RD3-006 Haracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium, RD3-015 Zantitium Red Dot Sight. Compatible with Doctor, Burris Fastfire, Vortex VenomViper, Meopta, Insight, Eotech MRDS, Sightmark Mini Shot Red Dot Sights. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..

Output 1mw Length 4.7''. Tube Diameter 1'' Laser Wavelength 532nm. Advanced laser optics give a superb laser sight. Adjustable windage and elevation. Provide clear pointing dot even in day light and clear laser beam in the dark or low light.

Designed to quickly attach detach from standard size handgunrifle with weaverpicatinny rails. Light weight Aircraft Grade Aluminum and Solid Steel Construction.. Operates with a single CR123 battery. Green laser meets FDA safety standards with adjustable windage and elevation..

Flat Dark Earth body color Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Fit rail-equipped pistols, rifles and shotguns. The RED laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Operates with one CR13N batteriesincluded. Battery life 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm. Controlled by ambidextrous switch. It offers two modes constant-on and strobe. This allows the user to easily set their mode based on personal need or preference.

Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail. Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Operates with one CR13N batteriesincluded. Battery life 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm. Controlled by ambidextrous switch. It offers two modes constant-on and strobe. This allows the user to easily set their mode based on personal need or preference.

Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.33.8 Single Stack, XDM, Hellcat Non-OSP Pistol. It does NOT fit 5.25 XDM competition series, it does NOT fit any OSP optics ready models. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. Zantitium RD3-015 Red Dot. New advanced battery technology gives up to 3000 hours on bright setting and up to 40k hours on Low setting with a CR2032 BatteryIncluded. The biggest handgun sight on the market Actual size is. 2.25 Length x 1.4 Width x 1.27 Height.For reference, vortex venom is 1.9Lx1.11Wx1.02H. It gives up to twice bigger window than other micro red dot.. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo.4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.

Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.33.8 Single Stack, XDM, Hellcat Non-OSP Pistol. It does NOT fit 5.25 XDM competition series, it does NOT fit any OSP optics ready models. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. Bertrillium RD3-013 Red Dot. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 BatteryIncluded. 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo. Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast..

This is a pair of Medium Profile riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The scope ringpair has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.64. Weight 3.37oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail. For pistols that does NOT has a raildovetail slot under the barrel such as Sig P365, user need to obtain a rail adapter for the laser to fit.. Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Operates with one CR13N batteriesincluded. Battery life 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm. Controlled by ambidextrous switch. It offers two modes constant-on and strobe. This allows the user to easily set their mode based on personal need or preference.

ADE is releasing the 2023 PRO SERIES for ADE RD3-0122016-present Delta red dot called Delta PROD3-012PRO. The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.. Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic platecut that is compatible with DoctorVortex VenomBurris Fastfire footprint. Does NOT fit optic platecut for RMR, Shield RMS type footprints.. The ADE Delta PROD3-012PRO has Motion Activated System. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn onoff the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press UpDown switches to adjust brightness.. 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light..

This is a 1 inch one piece riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.5. Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

Newly release for fall 2019 by Ade Advanced Optics. Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HG54G laser which takes non-rechargeable battery. This new HG54G RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries. Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.33.8 Single Stack, XDM, Hellcat Non-OSP Pistol. It does NOT fit 5.25 XDM competition series, it does NOT fit any OSP optics ready models. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. Crusader RD3-009 Red Dot. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 batteryIncluded.

This FDETAN body color RED Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADEs popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADEs FDE color will not 100 match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter.. This ADE RD3-012 Red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting platesSOLD SEPARATELY that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plateSOLD SEPARATELY.. It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided 1 mount, however the front switch of the sight needs to trim down 2mm.. Comes with battery, protective cover, M3x6mm screws for connecting to the provided picatinny plate, picatinny plate, lens cloth, wheel dial reference tool, allen wrench, screw driver, anti-flickering robber shim.. Top load System, no need to Remove the sight to change the Battery. ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-018 only Fits RMSRMSC footprint. RD3-019,RD3-020,RD3-023 fits RMR footprint. While it is possible to install the optic to handgun without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and lockable elevation adjustments. Weight approximate 1.6oz.. 6 MOA red dot..

ADE Rd3-002 red dot is the entry level red dot that comes with a built-innon removeable picatinny base. It can only be mounted on the pistols that has a picatinny rail on top. It does NOT works with pistols that does NOT has a picatinny rail on top.. The Build-in picatinny mount CAN NOT be removed and replace with a handgun mounting plate. For red dot sight made to attach pistol mounting plate such as Optics Ready pistols, or mounting plates to replace rear sight, please see ADEs other models such as RD3-006,RD3-009,RD3-012,RD3-013,RD3-015. Unlimited Eye Relief, 2 MOA Red Dot, PolishedCoated lenses, Parallax Free. ANODIZED ALUMINUM BODY. LED LIGHT EMITTING DIODE. Manual power switch at rear end. OffLowHigh. Only weight 1.9oz with battery installed.. Fully Multi-Coated Multiple anti-reflective coatings on all air-to-glass surfaces increase light. RD3-002 is Not recommended for heavy recoil firearm..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon. Pistol require special mounting plates that are sold separately.. This sight is slightly bigger than other micro handgun red dots such Vortex Venom. Actual size is. 2.25 x 1.4 x 1.27. It gives up to 2 times bigger window than other micro red dots. It can be used on a wide range of rifles, shotguns and pistols.. RD3-011 is compatible with handguns with mounting plates made for Trijicon RMR ONLY. It has the same footprintcutmounting plate as Trijicon RMR. We recommend OUTERIMPACT brand that their mounting plates are compatible with Trijicon RMR.. 3 MOA Dot,Light and Compact.Operates with 2023 batteryincluded.RD3-011 is different than other ADE models such as RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 that have the same footprint as Vortex Venom, Burris Fastfire, Meopta, Shield, Docter, Insight.. Comes with a removable picatinny mounting base. Lens is over 12 thick and made of impact resistant optical grade glass..

The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield. Can also be used with a long range rifle scope for that perfect Backup System. The onoff switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settings. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 batteryIncluded.

Non-handheld class 3R laser product, 5Mw power output. Released at 2017 shot show by Ade Advanced Optics. Fits Springfield XD mod 2 compact, Walter PK380, walther ccp, Ruger SR22, 9 e, SR 9 and ect. Does not fits Springfield xd-s, Glock subs have no rail. 5Mw green laser with strobe. 300 lumen Flashlight with high, low and strobe setting. Controlled by ambidextrous switch. Simply press to adjust. Gun sight fits pretty much all railed full size handguns and some sub-compact handguns with rail. Made of aircraft aluminum. Operates with a single cr123a batteryincluded that lasts about 2 hours. Ultra light weight 3.46oz.

Machined from lightweight, extremely durable 7075 aluminum, Mil-Spec hard anodized. Same height above bore as standard-issue sights. Low-profile sights extend only .2 above top rail, don't interfere with primary optics or military IR illuminator laser sight. Ambidextrous sights easily and securely mount to Picatinny rails using a flathead screwdriver. .50 MOA elevation and windage adjustments. Rear sight3oz Front sight1.5oz.

Newly release for Shotshow by Ade Advanced Optics. Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HG54R laser which takes non-rechargeable battery. This new HG54R RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries. Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn bright up and one to turn down. Hold the down button for 3 secs to power off. Every time you turn on the dot it stays the same brightness level last time it was turned off. Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It does NOT fit standard glock, or glock with a aftermarket slide.If you have an aftermarket Glock slide, please ask the slide manufacturer what exact optic cut they put on their glock slide and let us know for us to confirm which red dot fits.User need to contact pistol manufacturer to obtain the optic plate for OPTIC READY handgun.. This ADE red dot is NOT compatible with optic plateslidecut for trijcon rmrShieldHolosun 407 type footprint. It only compatible with footprint made for Vortex VenomBurris Fastfire type red dot platefootprint. Top load System, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo.. GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. For Non-Optics Handgun,user need to purchase after market Optic Plate made specifically for that pistol to replace the rear sight.This Green Dot comes with a removeable Picatinny plate ONLY. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately.

This FDETAN body color RED Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADEs popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADEs FDE color will not 100 match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter. ADE Spike also available in Black body and RED Dot. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum in FDE body and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Triplet glass lens for excellent Clarity. Leather case with snap closure to hold loupe securely. Three lens bonded together for high defination image.

Quality all metal construction. Measurement range of 1.30 - 1.81. Built-in LED light source with 3 x 1.5v batteries - included. Considered by many to be the most important of all gem testing instruments. Polarizing Filter, Hard and soft cases are included.

This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dotthis one and FDETAN body 4MOA Red dot.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This Listing comes with the optic sight, a Picatinny Mounting Plate and a Pistol plate for Ruger Security 9 full size and Ruger Security 9 compact size pistols by replacing factory rear sight. This pistol plate does NOT fit any other pistol models such as Ruger SR9, SR40, SR Series and any other pistols. Installing the aftermarket optic plate is not simply plug and play. We recommend having a qualified gunsmith to install.. This listing comes with ADE RD3-006 Green dot. It is one of the most reliable buget sight on the market with proven reliable performance since RD3-006 first launch on on amazon in 2014. Check youtube videos. 3 MOA. 5 Illumination Settings. Powered by a lithium CR2032 batteryIncluded. The onoff switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side.. ShockFog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture. Comes with instruction manual, lens cloth, wrench tool, screws, lens cover, piactinny plate and pistol plate for Ruger Security 9. When you first receive an ADE red dot. It has a picatinny mounting plate pre-assembled. Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates.

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

ADE is releasing the 2023 PRO SERIES for ADE RD3-0152016-present Zantitium red dot called Zantitium PROD3-015PRO. The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.. The ADE Zantitium Red dot sight is the biggest handgun sight on the market Actual size is. 2.25 Length x 1.4 Width x 1.27 Height. It gives up to twice bigger window than other micro red dot. Keep in mind with the bigger than others size, please keep in mind when installed on micro-compact handgun will look bulky.. The size of the red dot is about 30 longer than other red dots, the window is also bigger. Therefore, it will NOT fit some Optics Ready handgun model that has a optic cut in front of the rear sightwill keep the rear sight to co-witness the red dot, such as Glock Mos, Springfield OSP. The longer length of this red dot does not sit in the pre-cut. It only fits the mounting plate that is made to REPLACE the rear sight and set on the top of the slidenot in the pre-cut.. The ADE Zantitium PROD3-015PRO has Motion Activated System. While Zantitium PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has a option to manually turn the red dot power off to disable the Motion Activated System.. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR2032 battery. Press and Hold the DOWN switch for 3 seconds to manually turn onoff the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press UpDown switches to adjust brightness.. Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic plate to replace the rear sight DOES NOT FIT OPTICS READY PISTOL WITH CUT that is compatible with DoctorVortex VenomBurris Fastfire footprint. Does NOT fit RMR, Shield RMS type footprints plate.. 2.25 Length x 1.4 Width x 1.27 Height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light..

Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail. Proprietary mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included.Does NOT fits Berreta due to extra wide trigger guard.. Operates with one CR13N batteriesincluded. Battery life 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm. Controlled by ambidextrous switch. It offers two modes constant-on and strobe. This allows the user to easily set their mode based on personal need or preference.

Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Three different target acquisition methods 200 lumen Flashlight, laser, and Flashlight and laser together. Easy toggle switches. Light weight aircraft grade aluminum and solid steel construction. Operates with 2x CR123 batteryincluded. Designed to quickly attachDetach from standard size handgunrifle with WeaverPicatinny rails.

FDE Flat Dark EarthTan color Newly release by Ade Advanced Optics.Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HG54G laser which takes non-rechargeable battery. This new HG54G RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries.Battery is replaceable and can be purchased direct through ADE.. Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. 100 machined from aircraft aluminum. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output. Ultra lightweight and compact fits literal 99 of Ultra compact hanguns on the market.. Designed specifically for Springfield Hellcat Micro-Compact. Bright 250 Lumens flashlight, 3200 Candela peak beam intensity and 100 m beam distance. 100 Machined with aircraft aluminum with black anodized finish. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included.. Operates with one CR2 batteriesincluded. Battery life 1 hours. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm. Left and right side switches provide ambidextrous operation for laser and flashlight with Strobe. Size 1.9L x 1.1W x 1.7H inch. Weight 2.6 oz with battery.

Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Green laser meets FDA safety standards with adjustable windage and elevation. Operates with 1 single CR123 batteryincluded. it last about hours constantly on which is a lot longer than Red and green lasers. T6 aircraft aluminum body.

FDE Flat Dark EarthTan color Newly release by Ade Advanced Optics.Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HG54G laser which takes non-rechargeable battery. This new HG54G RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries.Battery is replaceable and can be purchased direct through ADE.. Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output.. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. 100 machined from aircraft aluminum. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

ADE RD3-023 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol with a PISTOL that is compatible with RMRSRO, Holosun 407C507C508T footprint red dots. The Valkyrie fits all pistol with optic cuts for Trijicon RMRSRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMRSRO.. The Valkyrie Gen 2 also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, SW MP 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F10C optics ready, Walther Q5 Match and Springfield XDXDMXDS OSP, Canik TP9 SFXCombat, FN 50945 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint.. Those name brand pistol manufacturer made Optics Ready handguns all come with several mounting platesoptic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR.. ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacture equipped rear sight, ADE Valkyrie's rear white dot acts as a pistol factory original rear sight for Co-Witness. 4 MOA GREEN Dot. Comes with a picatinny mounting plate and a pair of screws. This red dot does NOT comes with any other optic plate to mount on an specific pistol. Operates with a single CR2032 batteryinstall underneath. Gives around 800 hour battery life. Auto powers off after 1 hour of inactivity to save battery.. Dimension 1.79x1.18x1.4 inches. Weight 1.24 oz. ShockproofFogproof. Fully lockable windageelevation.. This model is the original ADE Valkyrie, ADE also have a ADE Valkyrie Gen2. The difference between ADE Valkyrie and ADE Valkyrie Gen2 is that the Gen2 is slightly shorter in overall length, and the shorter length allows Gen2 to sit into custom RMR cut, while original Valkyrie only fits optic plate for RMR footprint..

This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.5. Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Compatible with Trijicon RMR type foot footprintscrew patternmount holes, there are a few red dot sight sharing this footprints, including ADE Stingray, Holosun HS407CHS507CHS508T.. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.. Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Shield RMSRMSc,Eotech MRDS, Sightmark Mini Shot Red D.

This Listing comes with the optic sight, a Picatinny Mounting Plate and a Pistol plate for Ruger Security 9 full size and Ruger Security 9 compact size pistols by replacing factory rear sight. This pistol plate does NOT fit any other pistol models such as Ruger SR9, SR40, SR Series and any other pistols. Installing the aftermarket optic plate is not simply plug and play. We recommend having a qualified gunsmith to install.. The ADE Delta PROD3-012PRO has Motion Activated System technology. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.. Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic platecut that is compatible with DoctorVortex VenomBurris Fastfire footprint. 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light.. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn onoff the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press UpDown switches to adjust brightness.. ip67 Waterproof, ShockFog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..

This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.5. Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith Wesson handguns. This mounting plate fits SW Smith Wesson MP Full Size, MP 2.0 Full Size, MP 22 Full Size, MP Compact, MP 2.0 Compact, SD9VE,SD40VE, MP Shield. This mounting plate does NOT fit Smith Wesson MP C.O.R.E Series Already optics ready, MP Shield EZ .380, MP .22 Compact, SW9VE, SW40VE, Sigma. This mounting plate fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots.. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots..

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.. It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided 1 mount, however the front switch of the sight needs to trim down 2mm.. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt.

This is a pair of High Profile riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The scope ringpair has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.64. Weight 3.4oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

ADE is releasing the 2023 PRO SERIES for ADE RD3-0122016-present Delta red dot called Delta PROD3-012PRO. The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology.. Top load System, no need to Remove the sight to change the Battery. Comes with Red dot, tool, removeable picatinny plate with two screws, cover, lens cloth and instruction manual. Fits pistol optic platecut that is compatible with DoctorVortex VenomBurris Fastfire footprint. Does NOT fit optic platecut for RMR, Shield RMS type footprints.. The ADE Delta PROD3-012PRO has Motion Activated System. While Delta PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting.. The reticle can be switched between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only at the push of a button. Better yet, the same LED projects both reticles, so no re-zeroing is necessary. Operates with a single CR1632 battery. Press and Hold the DOWN switch for 3 seconds to manually turn onoff the power. Press and Hold the UP switch for 3 seconds to change reticle. Quick press UpDown switches to adjust brightness.. 1.75 length x1.25 width x1.15 height. IP67 Waterproof. The lens is coated with multi-coating to eliminate glare and provide a high level of performance in low light..

Designed to quickly attach detach from standard size handgunrifle with weaverpicatinny rails. Three different target acquisition methods 200 Lumen flashlight, laser, and flashlight and laser together. Easy Toggle switches. Light weight Aircraft Grade Aluminum and Solid Steel Construction.. Operates with 2x CR123 batteryincluded. Class IIIR laser product, 5mW power output.. Red laser meets FDA safety standards with adjustable windage and elevation..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

New design in 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XDM, XDS Pistol. Does not fit 5.25 XDM competition series. It is design to for Springfield Non-OSPNon Optics Ready XDXDSXDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25 XDM competition series. This new plate is an re-designed version to replace the old E1E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.. Fit Ade RD3-006AHuracan, RD3-006BCobra, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015ZantitiumRed dots. Also Fit Vortex VenomRazorViper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.. There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.. Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement..

Red Dot with 6 brightness level and Night Vision Sight, Light and Compact, Heavy Duty, Designed for Real Fire Caliber. Shock proof, Rain Proof and Fog Proof. Feature 1 M.O.A windage and elevation adjustments with audible click. Magnification 1.0x . Exit Pupil 22-33 mm. Weight net 115g 4.0 ounce. Integrated 21mm weaver mount base. 3 MOA Dot, Light and Compact. Operates with 2023 battery. Lens is over 12 thick and made of impact resistant lens optical grade glass. 5 years manufacturer limited warranty.

Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HG54G laser which takes non-rechargeable battery. This new HG54G RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries. Offers the brightest Green laser allowed by Law. Non-handheld class IIIa laser product, 5mW power output. Ultra lightweight and compact 1.79L x 1.06W x .85H. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

This is a 1 inch one piece riflescope rings. Mounting rings are pushed forward 2 for better eye relief.. ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher. Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body.. The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings. Height 1.5. Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

Compact, pocket size makes it great for traveling. with fixed slit fixed focus. Length 2.2 inch. Bring it with you on buying trips, vacations, or to trade shows. When white light travels though a stone, one or more of wavelengths that produce color are absorbed. Made of aircraft aluminum and finest optics..

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon.. Comes with mounting plate for Colt 1911 standard and also a standard picatinny mount.There are two types of rear sight on 1911 pistols. One is Colt standard rear sight,another is NovakAdjustable rear sight.This listing is for the Colt Standard Rear Sight. Please ask your pistol manufacturer which rear sight you have before purchasing.. WaterproofShockFog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 batteryIncluded.

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded. Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness..

Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery. The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately.

We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.. WaterproofShockFog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 batteryIncluded. Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness..

This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn bright up and one to turn down. Hold the down button for 3 secs to power off. Every time you turn on the dot it stays the same brightness level last time it was turned off. Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It also fits Non-Mos model that using a mounting platesold separately, please search amazon Item number B01L9734Y6 to replace rear sight.. This GREEN dot fits directly on Glock MOS system with the 1 mount that comes with MOS without needing to remove the rear sight. This glock MOS 01 plate need to obtain from glock, not included in this green dot purchase.. Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo.. GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off.

ADE is releasing several Pro Series red dots. This 2023 PRO SERIES for ADE RD3-0212022-present Nuwa green dot is called NUWA PRORD3-021PRO. The additional features that the PRO series includes are Motion Activated System, IP67 Waterproof, and Multi Reticle Technology. This ADE NUWA PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. The NUWA PRO has a fixed 66 MOA Circle with 3 MOA Dotcannot switch between. It is one of the lightest weight and smallest RMS footprint green dot with full metal construction, top battery loading and Motion Awake function. With Motion Activated System, while the NUWA PRO is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. Operates with a single CR1632 battery. 6 daylight brightness setting and 1 NV setting. The Night Vision Dot is not visible by the human eye, it is can only be seen thought a Night Vision. Battery life up to 10000 hours.. Ade Nuwa PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR1632 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, METE MC9, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint..

Newly release for fall 2019 by Ade Advanced Optics. Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time. This is a new updated version of the HG54G laser which takes non-rechargeable battery. This new HG54G RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves 600 spending on batteries. Offers the brightest laser allowed by Law. Non-handheld class 3R laser product, 5Mw power output. Ultra lightweight and compact 1.79L x 1.06W x .85H. Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight 1.13oz Battery included. Does NOT fits Berreta due to extra wide trigger guard.. Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern M1913 Pica tinny or Weaver-style accessory rail.

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

Offers the brightest Green laser allowed by Law. Non-handheld class 3R laser product Does not exceed Class IIIA emission limits, 5Mw power output, 535nm. Ultra lightweight and compact fits literal 99 of Ultra compact hanguns on the market.. Introducing a new member to ADE's HG54 Series.We added a bright flashlight to this HG54 PLUS without scarifying the size. The overall length is still short and fits 99.99 pistols on the market including Springfield Hellcat micro compact.The HEIGHT IS NOT TALLER than the triggerguard of handgun.. Pat pending double spring pins will automatically push into the transverse slot to prevent the sight flying away from the gun when locking mechanism lose the capacity.One pin is for full size pistol, another pin is for micro-compact pistol such as Springfield Hellcat.. Operates with one CR2 batteriesincluded. Battery life is one hours for laser only, one hour for flashlight only and one hour for flashlightLaser. The unit is quickly and easily, user-installed in moments and can be painlessly transferred from firearm to firearm. 100 Machined with aircraft aluminum with black anodized finish.Left and right side switches provide ambidextrous operation for laser and flashlight with Strobe. Size 1.88L x 1.18W x 1.38H inch. Weight 2.4 oz with battery.