Top 10 Best Air Compressor Drain Extension Kit

High Quality - Made of high quality braided steel with brass head, this kit is durable, rust and corrosive resistant.. Specification - Max working pressure is 175 PSI. The blasting pressure is 475 PSI. Max Temperature is 200 degrees F. With 14in. NPT threads, it can connect to the 14 NPT pipe.. Design - With our rubber-wrapped lever handle, it is easy to use and power saving.. Package - Our package incl. 10 inches hose, one piece of 14 to 38 brass adapter, which can connect to 38 pipe, one roll of thread seal tape.. 100 Satisfied Service - Enjoy a smooth frustration-free experience with our 100 Satisfied Service in one Month.

Air Compressor Tank Drain Hose 10 Inch Flexible Braided Steel Tube, 14in NPT14in NPT. Max working pressure 175 PSI. Blasting Pressure 475 PSI. Max Temperature 200 degrees F.. Hex Bushing Brass Adapter 38 Male x 14 Female, for joining brass fittings or fittings with internal and external threads of different diameters.. Made of high-quality stainless steel braided tubes and brass. Threaded joints provide a pre-coated thread sealant for better airtightness.. Includes threads on shut-off-valve to make it easy to add an additional drain hose or elbow. Package including 1Air Compressor Tank Drain Hose, 1 Threaded Sealing Tape, 1 Hex Bushing Brass Adapter..

The valve kit comes with one 20 inch long 12 OD nylon tube,Easy and fast installation.Max working pressure464.1Psi.Burst pressure826.7Psi.Work temperature-40248. The extended tank drain kit offers nickel plated copper elbow fitting.Size12 Tube OD x 14 NPT Male Thread.Maximum working pressure853.4Psi.Work temperature-22-230. High temperature and high pressure resistance of brass ball valve.SizeDouble 10mm OD barb.Maximum working pressure250Psi.Work temperature-22-230. Add an extra Hex bushing brass adapter.Can be used to connect copper nickel elbow to fit various air tank joints.Size14 NPT Female x 38 NPT Male.. An additional seal tape and hose clamp will be provided to ensure installation reliability and to prevent leakage.

Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 14 or 38 inch NPT drain valve.. The 10 braided steel hose is flexible which prevents breaking and kinks.. Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you dont have to do that on your knees anymore.. Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty.. Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure 175 PSI, Blasting Pressure 475 PSI Max Temperature 200 .

Each time your compressor runs, the moisture in the air condenses in the tank. This moisture must be drained daily from the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank.. The valve kit comes with a 10 flexible braided steel drain hose which prevents breaking and kinks. 14in. NPT threads at both ends matches 14in. NPT male brass fittings. Max working pressure 175 PSI. Blasting Pressure 475 PSI. Max Temperature 200 degrees F.. This 14 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for onoff to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F.. The extended tank drain kit offers a 14 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks.. There is a Hex bushing brass adapter which is 38 Male x 14 Female for connecting two pipes or with different diameters. Has a 38 male NPT threaded on one end and a 14 female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

Each time your compressor runs, the moisture in the air condenses in the tank. This moisture must be drained daily from the tank to prevent water buildup. Breezliy Extended Tank Drain Valve Assembly is perfect for the compressor tank.. Hex Bushing Brass Adapter 38 Male x 14 Female, for joining brass fittings or fittings with internal and external threads of different diameters.This 14 '' ball valve is made of nickel-plated brass for higher corrosion resistance than regular brass or steel .Easy to open and Close.. The extended tank drain kit offers a 14 '' elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks.. Max working pressure 175 PSI. Blasting Pressure 475 PSI. Max Temperature 200 degrees F.. Including 110 Inch Flexible Braided Steel Tube with 14 '' ball valve and 14'' elbow, 14'' NPT14'' NPT. 1 Threaded Sealing Tape, 2 Hex Bushing Brass Adapter. All Adapter with pre-applied thread sealant..

Overall length approximately 12 inch,Includes a 10-Inch braided Steel Tube Designed for Flexibility to Prevent Breaking and Kinks. ALL Male Threads that Have Pre-Applied Thread Sealant and 14 inch quarter turn drain valve Maximum Pressure 300-PSI,Also A thread seal tape is Included.. Easily drain your tank after every use.Extended Tank Drain Makes Draining Moisture Easier. With a 38 Male NPT x 14 Female NPT Hex bushing brass adapter,for connecting pipes with different ends size..

Automatically drains condensation from the air compressor tank. Designed for use with all air compressors. Easy to install and maintain. Simply choose the desired cycle time - Set the drain to activate anytime between 30 seconds and 45 minutes. Discharge time Adjustable from 0.5 to 10 seconds. Maximum working pressure 230 PSI. Supply voltage 120 V. Operating temperature 40F 140F. KIT CONTENTS Electronic Auto Tank Drain with 6 ft Power Cord, Clean Out Strainer Valve, 10 Braided Stainless Steel Tank Drain Tube with 14 NPT Elbow, Three-foot Drain Hose with Hose Clamp and Universal Multi-Purpose Mounting Bracket.

Includes a 10-Inch braided Steel Tube Designed for Flexibility to Prevent Breaking and Kinks. Features an Extended Tank Drain that Makes Draining Moisture Easier. Offering Male Threads that Have Pre-Applied Thread Sealant for Out-Of-Package Installation. Includes Threads on Shut-Off-Valve To Make It Easy to Add an Additional Drain Hose or Elbow. Offering a Maximum Pressure 300-PSI.

Type 2-way direct-acting valve. Air compressor tank drain valve.. Power supply voltage AC 110V-120V50Hz.. Structure Equipped with a ball valve filter, split with drain valve, an L-shaped structure.. Package Include 1 Set 12 Automatic timed condensate drain valve.. Usage Design for Compressed. Enjoy a smooth frustration free experience with our 100 Satisfied Service in one Month..