Top 10 Best Amplificador Taramps

COPPER CLAD ALUMINUM CCA - Our primary cable CCA wire is the most economical option for choosing power or ground wire and is a great conductor of power. Copper coated aluminum gives you an economic power cable with excellent power transfer. Systems that require more power should use ofc cable wiring.. POWER GROUND WIRE SET - Our bundled power wire set is great for a car amplifier or subwoofer or to be used as a ground wire on your electric wire installs. Use for many different applications such as indoor lighting, car radio, automotive, lighting, car speakers, power cables, 12v power inverter, ground wire, or welding cable.. SOFT TOUCH JACKET - Soft touch jacket design designed for the electrical and auto repair installer in mind. Strong, yet durable pvc jacket that is best for indoor use but has flexibility, elasticity, and impact resistance built in.. EASY POLARITY IDENTIFICATION - Easy color coded ground wire helps with installation to let you know which cable should connect to the terminal. Making a polarity error could cause serious damage to your audio equipment.. WIDE COMPATIBILITY - Also known as power wire, ground wire, trolling motor wire, automotive wire, speaker wire, car radio wire, amp wire, electrical wire, or welding wire designed for up to 300v voltage. We have many gauge wires to choose from, such as 10awg, 4awg, 8awg with black, red, blue wire color options and 25ft, 50ft lengths.

INPUT R and L Signal inputs. Connect these signals to the head unit's RCA outputs. Give preference to good quality shielded cables to avoid noise interference.. LEVEL Sets the input sensitivity of the amplifier, which allows for optimal adjustment to the output signal levels of almost all Head Unit models found on the market.. HIGH PASS Variable setting from 10Hz to 80Hz, which sets the beginning of the amplifier's frequency response.. LOW PASS Variable setting from 80Hz to Full, which sets the end of the amplifier operating frequency.. BASS BOOST- BOOST An extra 50Hz boost for the bass with variable gain from 0 to 10dB..

1 x Taramps TS400X4 Full Range Amplifier. Quantity 1 Amplifier Number of Channels 04 Max Power at 13.8 VDC 2 Ohms 400W 4 x 100W RMS Max Power at 13.8 VDC 4 Ohms 252W 4 x 63W RMS Bridged at 13.8 VDC 4 Ohms 400W 2 x 200W RMS. Input Sensitivity 200mV VolMax Signal to Noise Ratio greater than 90dB Frequency Response Full Range 18Hz to 30kHz -3dB High Pass Crossover HPF 90Hz -12dB 8th Low Pass Crossover LPF 90Hz -12dB 8th. Input Impedance 22K Ohms Thermal Protection System and Short Output Minimum Supply Voltage 8 VDC Maximum Supply Voltage 16 VDC. Standby Power 0.8 A Maximum Musical Power at 13.8VDC 16.5 A Maximum Consumption in Sine Signal 1kHz 13.8VDC 33 A.

15000 watts. 1 ohm.

INPUT Inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit, using good quality shielded cables to avoid noise interference.. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Units found in the market. POWER Power Supply ConnectorThe connector terminal must be connected to the battery's positive pole with a 10mm minimum wire gauge. The connector terminal - must be properly connect to the battery's negative pole with a same wire gauge. The remote terminal must be connected to the Head Unit REMOTE output with a 0.75mm wire. WIRE HIGH LEVEL INPUT Input for high level low impedance signals from the speaker output of the players or multimedia center..

Maximum Power 14.4 VDC - 1 Ohm 3000 Watts RMS 14.4 VDC - 2 Ohm 1920 Watts RMS.. Crossover High Pass HPF 8Hz 30Hz -12dB8 Variable. Crossover Low Pass LPF 60Hz 250KHz -12dB8 Variable. Input Sensitivity 220mV - Frequency Response 8Hz 250Hz -3dB. Dimensions H X W X D 9.41 x 2.87 x 8.58- Weight 6.51lb.

The TS 8004 2 ohms amplifier was developed with the highest technology and performance for automotive stereo systems.. 2 Ohm Impedance. 4 Channel. 800W RMS Power.

400 Watts. 2 Ohm. 8Hz to 250Hz. Extreme Bass. Bass boost, subsonic filter, low pass.

Full-range. Class-D amplifier. 4 channels of 110 watts RMS 2 Ohms. Crossover HPF and LPF. Variable gain control.

MD 12000.1 - 0.5 ohm amplifier is developed with the highest technology and performance for automotive sound systems, in white color, to make your system more sophisticated, It is mono, with a single channel with a maximum power of 12.000 Watts RMS.. It is a FULL RANGE amplifier, playing all frequencies in the right measure for you, Operation class Class D, Number of Channels 01, Maximum power 12.6 VDC - 0.5 OHM 12,000W RMS 12.6 VDC - 1 OHM 7,200W RMS. Input Sensitivity 220mV, Signal to Noise Ratio 95dB, Frequency Response 10 Hz 5 kHz -3dB, Crossover high pass HPF 10 Hz 90 Hz -12dB8th Variable, Crossover low pass LPF 90 Hz 5 kHz -12dB8th Variable, Bass Boost Freq. 35 Hz 55 Hz. Boost 0 10dB, Efficiency 79, Input Impedance 15K ohms, Output Impedance 0,5 ohm, Protection system Output Short circuit, Output Short circuit in relation to the GND, Low Impedance Protection High or Low voltage Protection Thermal protection. Maximum Power Supply Voltage 16VDC, Consumption at rest 3.6A, Maximum music consumption 602.5A, Maximum consumption in sinusoidal signal 1,205A, Dimensions H x W x D 8.976 x 2.755 x 21.653 inches 228 x 70 x 550mm, Weight 17.526 lbs 7.95 kg.

5000 Watts. 1 Channel. 1 2 Ohms. High Efficient. Automatic Impedance.