Top 10 Best Amprobe Clamp Meter

Display voltage and amps concurrently with large LCD dual display. True-RMS for accurate voltage measurements in noisy environments. Low pass filter for current and voltage measurements on variable frequency drives. Precise low current measurement down to 0.1 amp. HVAC applications with temperature, DC micro-amps and capacitance.

Clamp Meter with automatically ranging true mean squared TRMS technology for increased accuracy. Test leads measure ACDC voltage, resistance, continuity, frequency and capacitance and tests diodes. Thermocouple probe measures temperature. Low Impedance LoZ mode for identifying and eliminating ghost or stray voltages. CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating. Built to withstand a 6.6-Foot 2m drop. Low battery indicator and easily accessible battery compartment.

True-RMS. Voltage up to 1000V ACDC, ACDC Current up to 600A, resistance, frequency, THD total harmonics distortion and individual harmonics from 1 to 25, power kW, power factor. Low pass filter for variable frequency drives. Phase rotation indication. Non-contact voltage detection.

CL120 Clamp Meter measure AC current via the clamp, and ACDC voltage, resistance and continuity via test leads. Meter has backlit LCD for ease of viewing in low light and is CAT III 600V, Class 2 Double Insulated. RT210 detects the most common wiring problems in standard and GFCI receptacles. A convenient chart on RT210 helps determine wiring conditions open ground, reverse polarity, open hot, open neutral, and hotground reversed. NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications. Bright flashlight illuminates work area and may be used independent of NCVT-3P voltage detection function. ET40 tests AC voltages from 12V to 240V AC at four useful levels aligned with commonly used residential voltages.

True-RMS. Capacitance measurement for start and run motor capacitors. Safety Rated CAT III 600 V AMP-310, AMP-320 CAT IV 600 V, CAT III 1000 V AMP-330. Country of origin United States.

Clamp meter for measuring voltage, current, resistance, capacitance, continuity, and temperature in electrical wires and cables up to 1.18in. 30mm in diameter. True RMS meter provides accurate readings when measuring linear or non-linear loads with current or voltage that has a sinusoidal or nonsinusoidal waveform. Clamp head swivels 180 degrees for non-contact voltage detection from 70 to 600V AC and indicates presence of voltage with red indicator light and audible beep. Measures AC and DC voltage up to 600V, AC current up to 400A, resistance up to 40 megaohms, capacitance up to 4mF, continuity up to 400 ohms, and temperature from -30 to 400 degrees F -35 to 400 degrees C. Safety rated to European Standard 61010-01 Category III 600V.

True-RMS. Capacitance measurement for start and run motor capacitors. Safety Rated CAT III 600 V AMP-310, AMP-320 CAT IV 600 V, CAT III 1000 V AMP-330. Country of origin United States.

AC clamp multimeter measures current, voltage, resistance, and continuity in electrical wiring. Average-sensing meter helps provide accurate readings when measuring linear loads with a current or voltage that has a sinusoidal waveform. Low-current range in mA range with 0.1mA resolution for use in applications requiring measurement of leakage and fault currents. AC voltage measurement from 0 to 400V, AC current from 0 to 60A, resistance from 0 to 400ohms, and continuity detection. Safety rated to European Standard 61010-1 Category II, 600V and Category III, 300V. Relative value measurement to determine differentials. Data Hold to freeze measurement value on the display. Jaw opening 30 mm 1.2 inches. Auto-Power-Off to save battery life. Included accessories Batteries, carrying case test leads, users manual.

Digital clamp meter measures alternating current AC to 1,000 amp, direct current DC voltage and AC voltage to 600 volts V, capacitance to 3,000 microfarads, and resistance to 40 megaohms. Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. Transformer clamp with 1.77 45 mm jaw opening measures current without touching or interrupting the circuit. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings. Meets International Electrotechnical Commission IEC safety standard 61010 and is certified for category III installations up to 600V.

Digital clamp meter measures alternating current AC and direct current DC to 1,000 amp, DC voltage to 1,000 volts V, AC voltage to 750V, capacitance to 6.6 millifarads, resistance to 66 megaohms, frequency to 1 megahertz MHz, and duty cycles. True RMS root mean square sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform. Clamp with a 2 57 mm jaw opening measures current without touching or interrupting the circuit. Relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing quick comparison of multiple readings. Meets International Electrotechnical Commission IEC safety standard 61010 and is certified for category III installations up to 1,000V and category IV installations up to 600V.