Top 10 Best Apple Ssd Enclosure

Higher Compatibility This USB C 3.2 SSD enclosure works well for Apple original Mac SSDs with 1216 Pins. DOES NOT support Toshiba 1216 PIN SSDs please make sure your SSD in Mac is not a Toshiba one before purchase. NOT compatible with all SATA SSDs, or third-party SSDs. Support M.2 NVMe SSDs with an enclosure interface adapter.. Faster Data Transmission 10Gbps transmission speed with USB 3.2 Gen2 interface. Save and transfer data in a seconds. It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2 if the computer supports.. Friendly Design ACASIS USB C 3.2 SSD enclosure is sturdy and portable, with aluminum alloy case for quicker heat dissipation. To prevent it from being disconnected from your Mac or PC, we advise you put PCB back into the enclosure and tighten the screws to use which will also help dissipate heat effectively deselect Put hard disks to sleep when possible both in Battery and and Power Adapter.. System Requirements ACASIS USB C 3.2 SSD enclosure supports Windows781011,Mac OS 10.0,Linux 2.6 or later.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro. Easy Installation Just take out the PCB board from the enclosure,then fully insert SSD to card slot of the PCB board, we advise you put PCB back into the enclosure and tighten the screws to use. So it can get effective heat dissipation or it will disconnected in your Mac or PC. Plug and play, support hot plug.On Windows OS, hard disk will not available on This PC My computer, please find your drive from Disk Management..

Designed for MacBookUSB 3.2 Gen 2 Apple ssd enclosure compatible with 1216 PIN MacBook AirPro SSD, also compatible with Toshiba MacBook SSDToshiba MacBook SSD 656-0021A and OWC Macbook SSD, compatible with 20132014201520162017 MacBook Air RetinaMacbook ProIMac, equipped with adapter to support M.2 NVMe SSDs.. Extremely Fast Data TransferMacbook pro ssd enclosure is equipped with USB 3.2 Gen 2 interface, the average transmission speed is 10Gbps, USB 3.2 Gen 2 nvme ssd enclosure can also reach 20Gbps through USB 3.2 Gen2x2, which is very suitable for transmitting large files, and it only takes a few seconds to complete large files. save and transfer.. Advanced Heat Dissipation TechnologyMacbook ssd enclosure adopts aluminum alloy design, which has better thermal conductivity than traditional ABS material. At the same time, the shell is designed in a fish scale shape, which expands the thermal conduction area, improves the thermal conduction effect, and is easier to hold.. Compatible SystemsUSB 3.2 Gen 2 Macbook air ssd enclosure is compatible with Windows781011, Mac OS 10.0, Linux 2.6 or later. Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.. What You Will Get1USB 3.2 Gen 2 m.2 ssd enclosure, 1USB C to USB C Cable, 1USB C to USB A Cable, 1SSD Screw, 4SSD Case Screw, 1Screwdriver, 1m.2 Adapter..

MacBook SSD EnclosureThis SSD enclosure is compatible with Apple original Mac SSDs with 1216 Pins, NOT compatible with Toshiba 1216PIN SSDNOT Support for NVMe SSD, SATA SSD.. Extreme Speed Transmission Type-C to c 10Gbps high-speed transmission with USB 3.2 Gen 1 interface, the perfect solution for data transfer and data backup. One HD movie transfer only takes 2-5 seconds.. Aluminum Shell RGB DesignThis SSD adapter for Mac adopts an aluminum alloy shell, slim design, and durable and excellent heat dissipation. High-effective system protects your SSD from overheating when trading large files. Adjustable RGB Light shows the data transfer status, cool and nice touch.. Support Operating System Support System Multi OS, Windows, Mac OS, Linux, Android.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro. Easy InstallationJUST Unscrew the four fixing screws on the cover with a screwdriver and remove the cover from the SSD enclosure. Insert the SSD into the card slot, then close the case and tighten the screw. It allows quick and easy installation. play and plug..

Easy Installation Tool free installation. Plug Play, No driver needed for this SATA enclosure. Just push out the cover, plug in the drive, close the cover and go. Hot-swap supported. No request for extra power supply., quickly install and remove SSDs without any tools. DESIGN Ultra-slim Aluminum case with ABS frame. Sleek, Durable, and Convenient. Portable yet durable, ideal for traveling. DESIGN Ultra-slim Aluminum case with ABS frame. Sleek, Durable, and Convenient. Portable yet durable, ideal for traveling.. SPEED Reletech M.2 NVMe SSD external case adopts Realtek RTL 9210 control chip and latest USB 3.1 Gen 2 Type-C interface. Support UASP acceleration protocol and support theoretical data transmission speed of up to 10Gbps.Perfect for tech nerds, 4K content designers, and engineers. When using high-performance NVMe media, the readwrite performance can exceed 950 MBs, Data copy and transferring will be done in in no time.. COMPATIBILITY Reletech M.2 form factor compatible with both SATA and NVME in sizes 224222602280.Thunderbolt 3 compatible. SUPPORT MULTIPLE OPERATING SYSTEMS Supports Window Mac Linux. This external hard disk box is suitable for connecting computers, Smartphones, laptops, PS4, and other devices. Supports Window Mac Linux. This external hard disk box is suitable for connecting computers, Smartphones, laptops, PS4, and other devices..

Applicable SSD- -USB 3.2 Type-C SSD enclosure is Compatible for original and INDMEM 1216 PIN MacBook SSDs. NOT compatible with Toshiba 1216PIN SSD.. Outstanding Transmission- -Type-C to c 10Gbps high-speed transmission with USB 3.2 Gen 1 interface,measured continuous reading and writing. Read speed up to 950MBs, write speed up to 850MBs,steady and efficient.. Easy Setup - -Tool-free design allows quick and easy installation of your SSD Enclosure Adapter, support plug and play and hot-swap.Less than 3 minutes to install SSD and plug in.. Support Operating System- -USB C Enclosure SSDs Compatible for Mid 2013-2017 MacBook Air, Late 2013 - Mid 2015 MacBook Pro Retina, Late 2013-2017 iMac, 2013 Mac Pro, 2014 Mac Mini.. Aluminum Alloy Shell- - Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, reduced power consumption.be portable and easy to carry..

Read speeds up to 3194MBs and Write speeds up to 2488MBs. NVMe PCIe 3.1 x4 Designed for macOS 10.13 and beyond. Includes 1 Aura Pro X2 SSD 1 Tools 1 Envoy Pro Enclosure 1 USB 3.1 Gen 1 Type-A to Micro-B cable 1 Envoy Pro Carrying Case 1 Envoy Pro User Guide 1 Installation Guide for MacBook Air Mid-2013 - 2017, MacBook Pro Retina, Late 2013 - Mid 2015. Compatible With MacBook Pro Retina, 13-inch and 15-inch, Late 2013- Mid 2015 MacBookPro11,1 MacBookPro11,3 MacBookPro12,1 MacBookPro11,4 MacBookPro11,5 MacBook Air 11-inch and 13-inch, Mid 2013- Mid 2017 MacBookAir6,1 MacBookAir6,2 MacBookAir7,1 MacBookAir7,2 . 5 Year OWC Limited Warranty.

Upgraded MacBook SSD Enclosure The USB C 3.2 SSD enclosure works well for all Apple original Mac SSDs with 1216 Pins. Compatible with OWC brand SSDs. Also support M.2 NVMe SSDs with an enclosure interface adapter. Note Not support for Toshiba or SATA SSDs.. 2022 Latest High Speed Chip Support PCIe NVMe protocol PCIe AHCI protocol SSD, better work efficiency and more secure data protection. USB 3.2 Gen 2 Macbook air ssd enclosure is compatible for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro. Compatible with Windows, Mac OS, Linux, iOS.. Faster Data Transmission Macbook pro ssd enclosure with USB 3.2 Gen2 interface, the transmission speed is 10GbpsUSB-C to USB-A. It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2.USB-C to USB-C. Downward compatibility with USB 3.1 gen2, USB 3.0, USB 2.0. It only takes a few seconds to save and transfer files.. SSD Installation Steps Unscrew the four fixing screws on the cover with a screwdriver and remove the cover from the ssd enclosure. Align the ssd with the card slot on the ssd base and gently push it in. Tighten the screws with a screwdriver to fix the ssd on the ssd base. Tighten the 4 fixing screws on the cover with a screwdriver, and the installation of the ssd is completed. Note if the M2 ssd is connected, first install the adapter and then insert the M2 ssd.. Aluminum Alloy Shell USB 3.2 Gen 2 m.2 S ESDnclosure Adopts aluminum alloy shell, durable and excellent heat dissipation, reduced power consumption. You will get M.2 NVMe Macbook USB3.2 Gen2 SSD enclosure x1, USB-C to USB-C Cable x1, USB-C to USB-A Cable x1, SSD Fixing Screw x1, SSD Enclosure Fixing Screw x1, Bolt Driver x1, M.2 Adapter Plate x1..

Only support 612 PIN 2010 2011 Apple MacBook Air A1370 A1369 A1370 A1369 MC503 MC504 MC505 MC506 MC968 MC969  MC965 MC966 SSD to USB 3.0 interface. Supports more than Windows 2000 and Mac OS 10.7 operating system and don't require any software drives. Power supply with a maximum output DC 3.3V 3A. Master control asmedia using ASM1153E IC bridge chip, the maximum speed of up to 6Gbps. Color Black.

UPGRADED TBU405 BETTER HEAT DISSIPATION. New corrugated outer casing design for better heat dissipation. New look new style, add more fun to your work or your entertainment.. LIGHTENING-FAST 40Gbps. Speed test with Samsung 980 EVO Plus on Macbook Pro, the Read Write speed of ACASIS 40Gbps nvme enclosure reaches up to 2805MBs 2734MBs If your SSD does not support NVMe protocol, the speed will not exceed 600MBs, Different speed may vary from different system also.. Smaller and more portable. The size of the Aluminum External Hard Drive Enclosure is 106.11.45cm, small, exquisite, and easy to carry, making this M.2 nvme enclosure a good work and life partner. Equipped with 40gbps data cable, Let you have a super high-speed experience at any time.. Extensive Compatibility. ACASIS M.2 NVMe SSD Enclosure built-in Intel JHL7440 chip, adopts dual-chip master control,equipped with 40Gbps Type-C interface.The NVMe Enclosure compatible with USB 43.2 3.1 3.0 2.0 at respective speed limits to meet a variety of work and daily needs.. Plug and Play. This M.2 NVMe Enclosure supports M1 ProMax Mac devices and iPad Pro.Compatible with Windows, macOS and Linux. Just plug and play without a driver.Our NVMe Enclosure supports hot-swapping without affecting the rest of the server's capabilities..

PATENTED DESIGN - our patented design elevates your M1 Mac mini and provides easy front access to your most-used peripherals now, with an SSD enclosure for added convenience. Mac mini and SSD drive not included.. BUILT-IN SSD ENCLOSURE - equipped with a built-in SSD enclosure space to easily increase memory storage without adding clutter to your workspace. Includes screw and screwdriver for easy installation with no extra tools needed. Not compatible with NVMe, supports M.2 SATA SSD only.. USB-C EXPANSION HUB - features an USB-C data port up to 5 Gbps, 3 USB-A data ports up to 5 Gbps, microSD card readers UHS-I, and a 3.5mm headphone jack port for convenient access to all your essential peripherals. Note USB-C port doesnt support charging or video.. SLEEK, ELEGANT DESIGN - designed to feel like a natural extension of your M1 Mac mini with an elegant, brushed finish and silver aluminum alloy. Please note there may be slight differences in color due to Mac Mini variations and manufacturing processes.. COMPATIBLE WITH M2 M2 Pro Mac Mini, M1 Mac Mini, Mac Studio, 2020 Mac Mini. Not available in space gray. Does not support 2018 earlier Mac Mini models. Notes Internal SSD enclosure only fits M.2 SATA SSD drives not included, does not work with NVME SSD. USB-A ports will not support CD readers, including Apple SuperDrive, or charge iPads. We recommend connecting one bus-powered device at a time..