Top 10 Best Arctic P12 Max

DUAL BALL BEARINGS The P12 Max offers a long service life, high performance and remarkably silent ball bearing. Fans with slide bearings do not have the physically related bearing noise. Therefore, the particularly quiet alternative is the ARCTIC P12 PWM PST. DESIGNED FOR PERFORMANCE The ball bearings allow the P12 Max to operate 247, even at sustained high speeds, without compromising performance or increasing noise. WIDE RPM RANGE Thanks to the 4-pin connector, the speed can be controlled via PWM. Below 5 PWM the fan stands still, above 5 it is infinitely variable between 200-3300 rpm. PROVEN FAN DESIGN The closed ring fan wheel enables low-vibration rotation at high speeds and strong resistances while maintaining high static pressure. OUTSTANDING PERFORMANCE Most powerful 120 mm fan, 25 years of experience, direct customer support, many years of spare parts supply, CO2 neutral company. TECHNICAL DATA Fan speed 200-3300 rpm, Airflow 81.04 cfm 137.69 mh, Static pressure 4.35 mm H2O, Noise level 0.6 Sone.

OPTIMISED FOR STATIC PRESSURE During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. 200 TO 1800 RPM REGULATED VIA PWM PST Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors. EXTENDED LIFE SPAN A 10 C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature. TECHNICAL DATA Fan speed 2001800 RPM, Airflow 56.3 CFM95.65 mh 1800 RPM, Noise Level 0.3 Sone 1800 RPM, Pin 4-pin.

DIGITAL A-RGB The 12 A-RGB LEDs placed along the fan hub and the transparent rotor, with its enclosed design, provide even and rich illumination. EASY TO COMBINE Both the fan and A-RGB cables have an integrated Y-splitter, making it even easier to retrofit and control additional fans. OPTIMIZED FOR STATIC PRESSURE Thanks to its high static pressure, the fan guarantees efficient cooling, even with increased air resistance. Suitable for use on heat sinks radiators. 200-2000 RPM Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed. SPECIFICATIONS Fan speed 200-2000 rpm Airflow 48.8 CFM82.91 mh Static pressure 1.85 mmH2O Noise level 0.3 Sone Fan connector 4-pin LED connector 3-pin.

OPTIMISED FOR STATIC PRESSURE The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P12 is particularly suitable for use on heatsinks and radiators. HIGH QUALITY BEARING Thanks to an alloylubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. INNOVATIVE DESIGN The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation, the impeller was designed with a focus on minimzing the noise level. LONG SERVICE LIFE The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life. TECHNICAL DATA Fan speed 1800 RPM, Airflow 56.3 CFM95.65 mh 1800 RPM, Noise Level 0.3 Sone 1800 RPM, Pin 3-pin.

Renewed products look and work like new. These pre-owned products have been inspected and tested by Amazon-qualified suppliers, which typically perform a full diagnostic test, replacement of any defective parts, and a thorough cleaning process. Packaging and accessories may be generic. All products on Amazon Renewed come with a minimum 90-day supplier-backed warranty.. A8X Chip with 64-bit Architecture M8 Motion Coprocessor. Apple iOS 8 9.7-Inch Retina Display 2048x1536 Resolution. Wi-Fi 802.11a, b, g, n, ac Cellular 64 GB Capacity. 8 MP iSight Camera FaceTime HD Camera.

OPTIMISED FOR STATIC PRESSURE During the development of the new BioniX P120, special emphasis was placed on a focused airstream and thus a high static pressure. PWM SHARING TECHNLOGY PST PST ensures that all your fans listen to a single control signal, stop at low load, turn whenever necessary. EFFICIENT ENGINE MODERNISATION Thanks to sinusoidal magnetation, the new engine generates only 5 of the vibrations due to the switching of an ordinary DC motor. 200 TO 2100 RPM REGULATED VIA PWM PST With a wide range of regulation and the PWM Sharing Technology PST, the BioniX P120 fan speed can be controlled synchronously with all your other fans together. TECHNICAL DATA Fan speed 2002100 RPM, Airflow 67.56 CFM114.79 mh 2100 RPM, Noise Level 0.45 Sone 2100 RPM, Pin 4-pin.

30mm Thickness120x120x30 mm, 12V 4 Pin PWM, 220010 RPM, Max. 80.47 CFM, 2.95 mmHO, 70,000 hrs 25C. FDB BearingThe air volume larger while providing maximum cooling performance, and extending the life of the fan can reach more than 70,000 hours.. PWM ConnectorThe 4 Pin PWM Connector, controlled fan speeds high to 220010 RPM, Keep the system with the most appropriate performance.. Enhanced AirflowIncreased diameter of 120mm results in a 25 increase in fan blade width for high air pressure 2.95 mmHO airflow 80.47 CFM. 8 Anti-Vibration PadsEquipped with 8 x 6mm rubber pads fixed on both sides of the fan frame, reduce vibration and noise efficiently 36.99 dBA.

Uncompromising quality using glass fiber reinforced LCP Liquid Crystal Polymer for the fan blades and fan frame.. Easy and accessible switch to change fan profiles for silent, balanced or extreme performance operation Hybrid Mode 1200RPM, Performance Mode 2000RPM, Advanced Mode 3000RPM.. Smooth and powerful 3-Phase motor 6 poles operates with a lower frequency response for excellent sound quality.. Increased thickness of 30mm results in 25 thicker fan blades for much higher airflow performance.. Designed for PC cooling with aerodynamic optimalisations for better performance in dust filter equipped chassis and radiators.. Fan Dimension 120x120x30mm..

CABLE MANAGEMENT Case Fan Hub can be placed in housing, it's connected to motherboard with one cable, you can do without many additional cables and lay them freely in the invisible part of housing. SYNCHRONOUS FAN CONTROL Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub, the RPM of the first fan slot are read out and returned to your system. EXPAND YOUR VENTILATION Even if you don't have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. EXTERNAL POWER SUPPLY The fans are powered directly from your power supply via Sata Power, there is no voltage loss at the fan speed and smooth, smooth operation is made possible. TECHNICAL DETAILS Output 10 x 4-pin PWM Socket, Output Current up to 1 A per Port, Input SATA Power 4-pin Fan Header, Input Current up to 4.5 A, Dimensions 55.6 x 86.3 x 14.3 mm, Weight 50 g.

OPTIMISED FOR STATIC PRESSURE During the development of the new P12 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. 200 TO 1800 RPM 0 rpm 5 REGULATED VIA PWM Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at a minimum while maximum cooling performance is given when needed. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM to run much more efficiently than its predecessors. EXTENDED LIFE SPAN A 10 C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature. TECHNICAL DATA Fan speed 2001800 RPM 0 rpm 5 , Airflow 56.3 CFM95.65 mh 1800 RPM, Noise Level 0.3 Sone 1800 RPM, Pin 4-pin.