Top 10 Best Blowmold Replacement Light Kit

Blow Mold Light Kit Replacement Our blow mold light kit replacement does not include the bulbs, you can choose to install your own LED bulbs or incandescent bulbs, the sockets are suitable for bulbs with a voltage of 250V 660W, perfect for your Halloween and Christmas blow lights to create a good festive atmosphere. Accessory Cord with Switch There is a rotary switch on the single light cord, you can control the blow molded light at will with this switch The plug 125V 5A complies with US standards and is easy to plug in and pull out and the plug has 2 built-in fuses to ensure your safety during use Note please keep away from water sources. E27 Bulb Socket E27 bulb socket with good heat dissipation, Not only for large outdoor blow molded lamps, but also for indoor salt lamp pumpkin lamps and Xmas craft replacement light, long time use will not melt, can be reused many times, it can also be used as a spare part to help relight your old vintage blow molds. Wide Range of Applications just 3 assembly steps, screw the bulb into the lamp holder, the holder snaps into the chassis then plug in, and it's ready to use 5 feet of cord is enough for everyday use, suitable for bedroom hallway balconies as well as front door Halloween and Christmas blow mold light decorations, or use in indoor lamps or other craft installations.. Specifications Information The accessory cord has a bulb socket size of 27mm, fits E2726 bulbs and has a 5 feet cord with an onoff switch. The plug contains 2 pieces of fuse wire and a 3.5 inch base to help hold the bulb in place, suitable for a variety of Christmas village lights pumpkin lights salt lamps and blow molded lights.

Bright Blow Mold Light KitThe candle C7 Light with accessory cord has stable bright and good enough length for your Halloween and Christmas village houses decorations, the switch ONOFF allows you control the light easily.. Energy Saving LED Light BulbLED filament bulb has more bright and cooler touch than traditional tungsten lamp to avoid burning your crafts, 1W energy saving and environmentally friendly cord with light is safe for usage.. 2PCS Built-in Fuses AvailableThere are 2 pieces fuse wires built-in the plug, you can easily push open the fuse protection strip and remove the spared one, no more extra fuses need to buy.. Easy to Set UpOnly 1 assemble step, screwing the bulb into the lamp holder, plug to use, the adjustable metal fixing can fit for most holiday crafts like Halloween Christmas village house and salt lamp, you can also hang it to decorate Christmas tree.. Package IncludesComing with 8pcs LED Bulbs, 8pcs accessory cords, 1pc instructions, you can set up your village houses immediately..

Blow Mold Light Kit Replacement Our blow mold light kit replacement does not include the bulbs, you can choose to install your own LED bulbs or incandescent bulbs, the sockets are suitable for bulbs with a voltage of 250V 660W, perfect for your Halloween and Christmas blow lights to create a good festive atmosphere. Accessory Cord with Switch There is a rotary switch on the single light cord, you can control the blow molded light at will with this switch The plug 125V 5A complies with US standards and is easy to plug in and pull out And the plug has 2 built-in fuses to ensure your safety during use Note please keep away from water sources. E27 Bulb Socket E27 bulb socket with good heat dissipation, Not only for large outdoor blow molded lamps, but also for indoor salt lamp pumpkin lamps and Xmas craft replacement light, long time use will not melt, can be reused many times, it can also be used as a spare part to help relight your old vintage blow molds. Wide Range of Applications just 3 assembly steps, screw the bulb into the lamp holder, the holder snaps into the chassis then plug in, and it's ready to use 5 feet of cord is enough for everyday use, suitable for bedroom hallway balconies as well as front door Halloween and Christmas blow mold light decorations, or use in indoor lamps or other craft installations. Specifications Information The accessory cord has a bulb socket size of 27mm, fits E2726 bulbs and has 2 pieces of 5 ft cord with an onoff switch 2 plug contains 4 pieces of fuse wire and 2 x 3.5 inch medium blow mold base to help hold the bulb in place, compatible with a variety of Christmas village lights pumpkin lights salt lamps and blow molded lights.

36 inch Cord for indoor and or outdoor usage. Circumference measurement of about 3.5 inches. Great for Christmas village houses, Santa Claus, molded Christmas snowmen or reindeer, pumpkins, Jack-o-lantern, Halloween decorations, blow molds, angel displays, craft projects, etc. Includes one replacement cord with socket and instructions.. Replacement cord for General Foam blow mold products and others.

Replacement cord for General Foam blow mold products. For indoor and or outdoor usage 36 inch Cord. Great for Christmas village houses, Santa Claus, molded Christmas snowmen or reindeer, pumpkins, Jack-o-lantern, Halloween decorations, blow molds, angel displays, craft projects, etc. Circumference measurement of about 3.5 inches. Includes one replacement cord with socket, one red round plate, one screw, and instructions.

Replacement lights for Christmas HousesThis accessory cord with one light bulb fits for most Halloween and Christmas decorations, a great replacement light for your homemade pumpkin, village houses, blow mold snowman etc. UL listed, the C7 light cord is safe and durable for using indoor.. Energy Saving C7 LED Bulb0.6W LED, the village light cord adopts C7 LED bulb with E12 base, lower power consumption while higher brightness, 90 energy saving for long lifespan. The blow mold light produces soft warm glow, adding a fantastic festival atmosphere to Christmas holiday. Can be used as any other E12 base bulb replacement.. Longer Distance from Switch to Plug6 feet light cord with in-line rotary onoff switch, 4.5ft from plug to the switch, a longer distance than other village lights, so it is more convenient to reach the switch nearby to turn on the light immediately. Say goodbye to bending down behind counter, table or wherever you play village light on.. Easy to Use With flexible metal clip, The night light cord is well fit in most ceramic houses with 0.9 - 2.2 hole base. Insert it easily into existing blow molds without any tools. 360rotary switch brings convenience to turn onoff the village house lights.. Multiple PurposesC7 single light accessory cord is great for lighting miniature village houses, trees, craft projects, Halloween pumpkins, salt lamp, candles, night lights, Christmas soldiers etc, creating a cheerful and relaxing atmosphere. An ideal addition to any holiday decorations..

Blow Mold Light Cord for Christmas VillageThe warm white led Christmas houses lights has brighter lightness about 2700k and lower temperature for safe use, C7 candle light bulbs fits for most holiday craft objects such as Halloween pumpkin and Christmas mini houses.. LED Energy-saving Bulb1W Led single bulb light cord kit replacement has lower power consumption and cooler touch, lower Watt but higher brightness, can effectively avoid burns and objects melting, even children can use it safely.. 2PCS Spare Fuses AvailableDiffer from others Christmas village house lights, ours has 2 built-in fuses in the plug of each blow mode extension cord replacement, you can easily push and open the fuse protection strip and remove the spare fuse.. Modern Design for Easy UseThe adjustable metal fixing and turn onoff switch allow you can fix it on the crafts easily and control the light easily, white accessory replacement cord with one bulb light fits for most Christmas decorations.. Package Includes2 x led bulbs, 2 x cords with plug, 1x user manual, you can assemble it in few minutes. Warm Reminder please make sure nice weather to use it outdoors..

This clip light cord is perfect for lighting ceramic village houses, small christmas trees, pumpkin lights or any craft project.. Completely assembled 6 foot long white cord withmolded end plug- ready to use. Socket is E12 C7 Candelabra base and clips into any hole 1 inch in diameter. Socket takes up to a 40W candelabra base bulb and is metal lined for positive bulb contact.. Components are U.L. listed..

2 Pcs C7 Accessory Cord with 2 Bulbs Long accessory cord with ONOFF dimmer switch and a female plug that creating a warm and relax atmosphere for you.. Blow Mold Light Cord with Clip Bulb C7E12 Candelabra LED Bulbs, 120V 0.6W 7 Watt equivalent incandescent bulbs, 25,000 hours lifespan, 50 Lumes, 2700K soft Warm White, Non-Dimmable, Simply attach the clip to fix each bulb into village house, craft, lamp, and more.. Difference from other C7 light Cord Our switch is designed to be closer to the plug of Cord for you to adjust easily.. Wide Application Good choice for nightlights, plug-in night light, decorative lighting, salt lamps, salt baskets, Christmas string light, Christmas villages, Create the right mood and atmosphere for your home.. Package Includes 2x led bulbs, 2x cords with plug, you can assemble easily. Warm Tips Please make sure sunny day to use it outdoors, it is not waterproof..

Easy Clip-in SetupEquipped with a flexible clip at lamp socket, the accessory cord with one light bulb can be easily snapped into any blow molds, Christmas village houses or other craft projects with at least 1-inch diameter hole. The length of C7 LED bulb together with lamp socket is approximately 2.7in so it doesnt take up much space and can fit into any ornaments that need lights, large or small..