Top 10 Best Bora Track Saw Guide

Includes 50-inch NGX clamp edge, 50-inch NGX Extension with connectors, Saw Plate, 2 rolls of non-chip strip, 2 Track Clamps, T-Square Accessory. Clamping end on straight edge moves with handle for easy adjustability from one side. Locking handle grabs work surfaces for secure grip that wont budge. Includes 50 Clamp Edge and 50 extension for 100 cutting capacity. Made of heavy-gauge, rigid aluminum for extreme durability.

Cut Any Angle BORA Track Clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate. Easy Set Up Attach the track clamp to the top or bottom of the rail for maximum grip. Easily tighten or adjust the clamp with the speed nut and lock it in place. Non-Marking Grip Each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations. Solid, Secure Hold The strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose. Versatile Sturdy construction makes them perfect for use as a work stop, a vise, or to increase your holding power.

Get It Straight Every Time This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 100-inch length allows you to saw with precision and skill. Locked In The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge while you cut. Make Measuring Easy The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy. Suited For Your Needs The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, youll save time and eliminate waste due to crooked, uneven cuts. Additional Accessories The BORA WTX Saw Guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the Router Guide. 100 Inches Of Cutting With your purchase you will receive a 50 WTX Clamp Edge and WTX 50 Extension, connect the pieces together for 100 inches of straight cuts.

Time Saver The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with a circular saw, jigsaw, or router. Fast Set-Up Adjust the gripping clamp end to the desired length, lock it in place, and start cutting. Long Cutting Length This 50 guide rail is long enough for large and wide sheet material and can be used with all types of saws. Easily increase the length up to 100 inches by adding the BORA NGX 50-inch aluminum extension, sold separately.. Ruled Straight Edge The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always the right size. Extreme Durability Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.

Precise Rip Cuts and Crosscuts Get straight accurate rip cuts and crosscuts up to 24 inches 610mm wide on the sheet material you are breaking down. Repeatable Accuracy The Bora Rip Guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time. Save Time The Rip Guide by BORA will eliminate the need for marking and measuring each cut. Lock in your measurement and saw for accurate cuts every time. Now you can confidently make multiple cuts at once. Easy Setup Three simple steps and your Rip Guide is set up The Saw Plate stop allows you to quickly setup your saw every time. Stability Large ergonomic Rip Guide handle ensures a solid grip. The aluminum rail attaches securely to the Saw Plate for confident cuts. Use with Left- and Right-Hand Saws Securely fit most left- and right-hand circular saws to the BORA Saw Plate and Rip Guide.

GET IT STRAIGHT This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill.. CONTRACTORS COMPANION - This tool is made for use with the Bora WTX Saw Plate sold separately, and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools.. LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge.. AS LONG AS YOU NEED Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, youll save time and eliminate waste due to crooked, uneven cuts..

Track Saw Precision Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time. 100 of Cutting Capacity The NGX 50 Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50 aluminum extension.. Stop the Guesswork Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.. Reduce Tear Out Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.

Fixed Center Molded Channel Reduces Blade Offset And Guesswork. Self-Adhesive Non-Chip Strip Attaches To The Bottom Of Your Ngx Clamp Edge And Reduces Top Edge Tear-Out For A Smooth Finish. Quick-Release Clamps Are Adjustable So Your Saw Goes On And Off The Plate Effortlessly. Aluminum Guide Rails Position Your Saw Accurately Every Time.

Circular Saw Guide For Large Sheets The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw. Clamps Firmly This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that wont leave indentations and is easily adjustable to meet the length of your project. Extreme Durability Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use. Use With Any Circular Saw This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension.

Includes 24-inch 50-inch WTX Clamp Edges, 50 Extension with connectors, Saw Plate. WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability. Adjustable channel on saw plate fits a wide variety of straight edges up to 3.5 wide. Fits right- and left-handed circular saws. Ruled extrusion allows for easy measurements. Locking handle grabs work surfaces for a secure edge that won't budge. Replacement set for BORA 543400 4-piece set.