Top 10 Best Brake Flare Tool Kit

Creates single, double inverted SAE flares and bubble ISO flares up to 0.040 wall thickness. This is a professional tool, please read instructions before using. Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing. Includes flaring dies for all sizes 316, 14, 516, 38, 716, 12, 58, 4.75mm, 6mm, 8mm, 10mm. Self-centering premium yoke has corresponding slots to hold bar assembly tightly in place during flaring operation. Contents Include 1 SAE Forged Alloy Steel Flare Bar, 1 Metric Forged Alloy Steel Flare Bar, 1 Self Centering Premium Yoke, 13 Hardened Flare Die Heads, 1 Tubing Reamer 3mm-12mm, 1 Tubing Cutter 18 to 58 OD, 1 Rigid Plastic Storage Carrying Case.

Get a Leakproof Connection When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare makes tubing wider to brake line end for a leak-free connection without hours of hand cramping or twisting exercises. Fits Your Application 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal copper, aluminum brake lines, transmission cooler lines, and fuel lines For 316-inch 4.75mm, 14-inch 6.35mm, 516-inch 8mm, and 38-inch tubing. Use Your Vise Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field not intended for use under car 6-inch 15.2 cm T-handle screw clamp holds die and tube in place so you can create flares quickly and easily. Durability You Need Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees Each die block is 1.7 inches 4.3 cm long Approximate 1.5-inch 3.8 cm actual clamping surface we recommend only placing bends in the last 2.5 inches 6.4 cm of tube after flared. Package Contents Brake line flare kit includes 1 brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve 27.9x12.7 cm, 4 end dies, 1 instruction manual, and 1 14.1 x 6.1 x 3.5 inch 35.8x15.5x8.9 cm plastic blow-molded carrying case.

MAKE DOUBLE BUBBLE FLARES The ABN Double Flare Kit Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more Fixed head and angles make clean, precise flares Yoke type compressor with T-bar handle for firm grip Cone for accurate alignment For 316, 14, 516, 38, 12, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing Adapters included. QUICK PRECISE CUTS Use the included small pipe cutter to cut 18-inch to 58-inch 3-16mm steel, aluminum, and copper tubing Pull back the blade and revolve the pipe while compressing 2 rollers prevent skipping and jumping for most consistent tracking Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut. BUILT TO LAST Swivel constructed from chrome-plated alloy steel to reduce friction Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion. EASY STORAGE Heavy-duty 11.9 x 2.8 x 9.2 inch 30.2cm x 7.1cm x 23.4cm plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization Includes double flaring and bubble flaring instructions for use. PACKAGE CONTENTS Package includes hardened flaring bar assembly clamps with 10 SAE metric tubing sizes 316, 14, 516, 38, 12, 4mm, 4.75mm, 6mm, 8mm, 10mm, corresponding flaring tool adapter dies, yoke assembly reamer, tube cutter 18 to 58 3-16mm, and a carrying case for your convenience.

Set IncludedFlare bar x 1, flaring cone x 1, flare adapters x 7, tubing cutter x 1 and carrying case x 1.. MultifunctionDouble or single automotive flaring tool set,Creates 45 degree double or single flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration.Suitable for most soft steel,aluminum,brass and copper pipes.Pipe cutter has 2 rollers secure the tube betterFold-away slide lock tube reamer deburring blade for a better connection extra blade for replacement.. ApplicationDouble automotive flare tool kit suitable 316, 14, 516, 38, 716, 12, 585,6,8,10,12,14,16mm Tubing cutter has a 18 to 1-18 inches 3-30mm capacity with inner outer reamer.. Durable DesignYoke Heat-treated steel material for maximum strength and longevity that resists corrosion. Swivel constructed from chrome-plated alloy steel to reduce friction.. PortableHeavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization. Instruction includes for use easily..

INCLUDES This Double Flaring Tool Kit includes one 14-inch adapter, a 516-inch adapter, and a 12-inch adapter and two adapters in each of the following sizes 316-inch and 38-inch. These adapter sizes also cover sizes 4.8-12.7mm. Our Double Flaring Tool kit also includes a mini tubing cutter with a 18- 58-inch capacity and a convenient storage case to ensure that you'll never misplace part of your kit. Additional adapters available in ARES 18020 - Double Flaring Tool Adapter Set.. QUALITY The forged yoke is constructed from premium Heat Treated Steel, and the swivel is constructed of alloy steel with chrome plating to assist in reducing friction.. APPLICATIONS This versatile Double Flaring Tool kit can be used when flaring a double or a single flare in copper, aluminum, brass, magnesium, and soft steel brake line tubing. NOTE This kit is not designed for use with stainless and other hardened steel materials.. RELIABLE EFFECTIVE EFFICIENT Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES double flaring tool, simply contact customer service for troubleshooting help, parts, replacement, or refund.. ASPCA BUSINESS AMBASSADOR We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization..

Double flaring copper aluminum soft steel brake line tubing tool kit including 1 flaring cone,1 flaring yoke and 5 adapters Wide range of sizes - 316, 14, 516, 38 and 12 inch 4.8, 6.4, 7.9, 9.5, and 12.7 mm.. Swivel is constructed out of alloy steel and chrome plated to assist in reducing friction.. Heavy duty yoke is forged from heat treated steel to ensure durability and strength.. Designed to use when flaring double or single flare in copper,aluminum,magnesium,and brass tubing as well as soft steel brake line tubing.. Blow molded hard plastic storage case keeps tools contained and organized,provides a convenient handle for easy transportation and portability,provide instruction for easy use..

Includes dies for 316, 14, 516, 38 tubing.. Creates Single Flares, Bubble Flares, and Double Flares. Easy operation. Mounts in a vise. T-handle screw clamp securely holds die and tube. Each tool comes pre-tested from the factory and includes the sample flare from the test..

Specifications this flaring set includes 316 in., 14 in., 516 in. and 38 in. double and single flares which are designed to reduce the chance of the tube slipping from the clamp. Double and bubble flares measure 4.75mm, 6mm, 8mm. Equipment Design with compact design, the in-line flaring tool enables the user to flare copper or soft steel tubing in tight spaces. The double clamp and hex body keeps tube from slipping, keeping flares centered and making flaring easier. Flaring Tool Adapters in-line flaring set is designed to simplify flaring chores. The design locks the adapter's cone and tube in a perfect line which makes accurate factory flares with less risk of breakage. Tubing Tool Kit with the clamp and screws laying pressure directly over the tube, there is a great chance of the tube slipping from the clamp. Flaring tools reduce this chance and make it work effectively. Durable Material flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel materials perfect for tough job sites. NOTE The tool is not to be used with stainless steel which can damage the tool.

For cutting, bending and flaring metal tubing. Perfect for automotive, HVAC, plumbing and electrical projects. Fits tubing from 316 OD to 58 OD. Handy storage tray fits in toolbox drawer. EASY TO READ Includes usage instruction with photos.