Top 10 Best Brake Line Flaring Tool Kit

DO IT YOURSELF Comes with everything you need for cutting, bending, and flaring metal tubing like a pro. USEFUL ADDITION Perfect for servicing automotive plumbing systems for brakes, transmission, oil, and more. Works for HVAC, plumbing, and electrical projects.. WIDE RANGE OF ADAPTERS Included double flaring adapters fit tubing from 316 inch OD to 58 inch OD. COMES IN Heavy duty blow molded case to keep set protected and organized. EASY TO READ Includes usage instruction with photos.

MATERIALRacewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance. UPGRADE TO 20 FITTINGS 2 x 316 716-24 Inverted Tube Nut 10 x 316 38-24 Inverted Tube Nut 2 x 316 12-20 Inverted Tube Nut 2 x 316916-18 Inverted Tube Nut 4 x 316 38-24 threads unions. RUST AND CORROSION PROOFINGOur 316 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions. MAKE DOUBLE SINGLE FLARES Designed to use when flaring single or double flare in a variety of material copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 12, 38, 516, 14, 316 O.D. tubing.. WIDELY APPLICATIONBrake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..

Tube and die set stabilizing arm for easy tube forming. Magnetic adapter holder keeps adapters in place. Equipped with an enlarged die set compression area for better grip of dies. This tool can be used on annealed steel dead soft.

Creates single or double flares on 316 4.75mm and 14 tubing.. Low Profile Design Allows Tubing to be Flared in Tight Spaces.. The vise assembly holds tubing centered securely without marring.. Depth stop ensures proper tubing length..

MultifunctionThis flaring tool creates 45-degree double or single flares. It can be applied to copper, aluminum, brass, magnesium, and other soft steel lines. Ideal for brake line, HAVC, air conditioning brass line and so on. Durable MaterialYoke made of heat-treated steel material for maximum strength and longevity. Swivel made of chrome-plated alloy steel to reduce friction. ApplicationsDouble flaring tool kit suitable for 316, 14, 516, 38, 716, 12, 58 5, 6, 8, 10, 12, 14, 16mm single or double flares Tubing cutter has a 18 to 1-18 inches 3-30 mm capacity with inner outer reamer. Tubing Cutter IncludedPipe cutter has 2 rollers and fold-away slide lock reamer deburring blade used to cut steel, aluminum, and copper tubing cutting wheel life and adjustment amount for each turn depends on material hardness. Easy Storage and PortableHeavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization.

Get a Leakproof Connection When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare makes tubing wider to brake line end for a leak-free connection without hours of hand cramping or twisting exercises. Fits Your Application 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal copper, aluminum brake lines, transmission cooler lines, and fuel lines For 316-inch 4.75mm, 14-inch 6.35mm, 516-inch 8mm, and 38-inch tubing. Use Your Vise Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field not intended for use under car 6-inch 15.2 cm T-handle screw clamp holds die and tube in place so you can create flares quickly and easily. Durability You Need Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees Each die block is 1.7 inches 4.3 cm long Approximate 1.5-inch 3.8 cm actual clamping surface we recommend only placing bends in the last 2.5 inches 6.4 cm of tube after flared. Package Contents Brake line flare kit includes 1 brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve 27.9x12.7 cm, 4 end dies, 1 instruction manual, and 1 14.1 x 6.1 x 3.5 inch 35.8x15.5x8.9 cm plastic blow-molded carrying case.

MAKE DOUBLE BUBBLE FLARES The ABN Double Flare Kit Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more Fixed head and angles make clean, precise flares Yoke type compressor with T-bar handle for firm grip Cone for accurate alignment For 316, 14, 516, 38, 12, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing Adapters included. QUICK PRECISE CUTS Use the included small pipe cutter to cut 18-inch to 58-inch 3-16mm steel, aluminum, and copper tubing Pull back the blade and revolve the pipe while compressing 2 rollers prevent skipping and jumping for most consistent tracking Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut. BUILT TO LAST Swivel constructed from chrome-plated alloy steel to reduce friction Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion. EASY STORAGE Heavy-duty 11.9 x 2.8 x 9.2 inch 30.2cm x 7.1cm x 23.4cm plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization Includes double flaring and bubble flaring instructions for use. PACKAGE CONTENTS Package includes hardened flaring bar assembly clamps with 10 SAE metric tubing sizes 316, 14, 516, 38, 12, 4mm, 4.75mm, 6mm, 8mm, 10mm, corresponding flaring tool adapter dies, yoke assembly reamer, tube cutter 18 to 58 3-16mm, and a carrying case for your convenience.

Creates single, double inverted SAE flares and bubble ISO flares up to 0.040 wall thickness. This is a professional tool, please read instructions before using. Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing. Includes flaring dies for all sizes 316, 14, 516, 38, 716, 12, 58, 4.75mm, 6mm, 8mm, 10mm. Self-centering premium yoke has corresponding slots to hold bar assembly tightly in place during flaring operation. Contents Include 1 SAE Forged Alloy Steel Flare Bar, 1 Metric Forged Alloy Steel Flare Bar, 1 Self Centering Premium Yoke, 13 Hardened Flare Die Heads, 1 Tubing Reamer 3mm-12mm, 1 Tubing Cutter 18 to 58 OD, 1 Rigid Plastic Storage Carrying Case.

Get the job done in half the time this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 316 in. tubing such as brake lines. Works flawlessly with 316 in. steel, nickel, and copper tubing. Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots. Detachable die lets you also use with a bench vise. All-in-one tool. All you need is a 10 mm and a 17 mm wrench to work with the tool.