Top 10 Best Buck Boost

input voltage range is DC 5-30V output voltage range is DC 0.5-30V, can be arbitrary adjustable output current can be 3A for long term use, if enhance heat dissipation, it can reach 4A max output power is 35W, if enhance dissipation, it can reach 50W. LCD displays inputoutput voltage, output currentoutput poweroutput capacityoutput time.The module can be set to ONOFF by default. Safe Protection the module is with Anti-reverse connection protection of input end, so that it will not burn out when there is reverse connection.Anti-backflow protection at the output end. No need to add anti-backflow diode when charging. Multiple software protection mechanisms are available, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output will be automatically turned off. Application the volt conversion board can be used as an ordinary buckBoost module with over-current protection used as a high-power LED constant current driver module DIY a solar power controller, Battery Charging. Output ripple is small and filter is available.Thick heat sink .Buck-boost Integrated.

Wide input voltage 5V-32V Wide Output Voltage 1.25V-35Vwith automatic step-up and down, within the scope of work, any voltage input can be regulated any voltage output. Model specificationXL6009 step up down Converter module. 4A high efficiency MOSFET switchesThe efficiency of XL6009 can be up to 94. high switch frequency 400KHzEven if small capacity filtering capacitors can achieve very good results. ApplicationCar regulator , solar photovoltaic, wind power and other applications of voltage instability . .

High PrecisionThe buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects.. Input VoltageDC 3V to 40V input voltage must be 1.5V higher than the output voltage, no boost.. Output VoltageDC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A.. Mini Size45 23 14 mm with potentiometer. 6pcs included.. Easy to DIYConnect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means - 1V.

Parameter --- Input voltage DC 6-30V Output voltage DC 0.5-30V Output current 4A max, adjustable, recommended to use within 3A Output power 60W max, recommended to use within 50W.. Easy to Read LCD Display --- The buck boost board is designed with a large clear digital LCD display on which shows both voltage and current value simultaneously. Which is easy to read and can help the user easily monitor the output voltage, then largely enjoy their DIY work.. Application --- This voltage step up and down module can be used as a normal boost buck converter module with over-current protection, a battery charger, a high-power LED constant current driver module, etc.. Features --- Constant currentvoltage mode Voltage calibration calibration USB output Protective case Short-circuit protection Over-temperature protection Input reverse connection protection. You can find the PDF Instructions on this page -- Product information -- Product guides and documents -- User Manual PDF.. NOTE --- 1. Constant current adjustable means that CC mode only works when the actual load output current is greater than the setting one, otherwise it will work in a constant voltage state, not the current is adjusted to 2A, then it will become 2A for any load being connected. And if the CC value to be adjusted is small, adjust ADJ-I counterclockwise a few more times to change. 2. The case is packaged disassembly to avoid damage during transit. It needs to be manually installed..

DC-DC 3A buck converter power step-down adjustable power supply module for LM2596, adjustable voltage regulator.. Non-isolated step-down module.. Output current rated current is 2A, maximum is 3A.. The Output Voltage adjustable from 1.5V 35V.. DC-DC step-down module for LM2596 with LED light, indicate itself..

PARAMETER --- DROK DC-DC converter input voltage range is DC 936V 12V output voltage is DC 12V output current is 5A output power is 60W.. APPLICATION --- the 12v buck boost converter module can be used in integrated wiring for monitoring fire alarming system car radio, audio bus, minibus, truck display screen, taxi advertising screen LCD television, LED solar power generation system interphone, etc.. PROTECTION --- this voltage stabilizer comes with over-current protection, over-temperature protection adopts potting technology, characterized by waterproof, dust-proof, moisture-proof and shock-proof, can be used in various situations such as car, outdoor, underground, etc.. FEATURE --- the step down power module adopts high-integrated chip, stable and reliable synchronous rectification technology, with conversion efficiency of over 90 and low heat generated.. NOTE --- Leave a margin for the power supply to ensure it can long-term stably working..

Style Enclosed - Encapsulated Core and Coil. Model Number T181052. Item Package Dimension 4.51 L x 4.75 W x 9.68 H. Item Package Weight 19.0 lb.

Buck boost converter input voltage range is DC6V-36V, adjust output voltage range is DC0.6V-36V,step by 0.01V, output current range is 0-5A,step by 0.001A, Which can display the power interface, Capacity interface,Voltage and current curves interface,system parameter setting interface.. Step up down power supply adjust converter 5 diaplay pages, inputout voltageV, current A, temperature T, power W, electric capacity AH, electric quantity WH, running time, voltage and current graph, system and power parameters.. Can flip or rotate voltage regulator display on this power supply unit, change the color of the background and parameters and switch the daynight display mode, allows to set volts and limit the current, power on off and accurate voltage setting return after power down.. Adjustable buck boost converter application compact and powerful, on the go variable power supply or LED driver DIY lab power supply.. The power supply step down converter support multiple functions.such as over-voltage protection,over-current protection,over-power protection,low-voltage protection, over-temperature protection, reverse protection, and short circuit protection, and so on..

PARAMETER --- buck boost converter, input voltage range 5.5-30V output voltage range 0.5-30V working current 4A power 35W.. APPLICATION --- as a normal boost buck converter module with over-current protection as a battery charger as a high-power LED constant current driver module, etc.. PROTECTION --- soft start input reverse connection protection output anti-backflow protection short-circuit protection over-current protection over-power protection over-temperature protection.. DISPLAY --- clear LCD screen displays input voltage, output voltage, temperature, output current output power switched by button.. OTHER FEATURES --- with buttons to switch displayed parameter set output ONOFF with CC CV potentiometer with protective case needs to be manually assembled with LC filter..

Easily configured for numerous applications. Lower cost solution. 5-10 times increase in KVA. Made in Mexico.