Top 10 Best Canik Tp9 Elite Sc Red Dot Sight

This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dotthis one and FDETAN body 4MOA Red dot.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dotthis one and FDETAN body 4MOA Red dot.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint PlateSlide seamlessly.. The onoff switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.. Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.. Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.. If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability 99 that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.. ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cutoptic plate that is compatible with shield RMSRMSCDeltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cutoptic plate that is compatible with Trijicon RMRcc footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cutoptic plate that is compatible with Trijicon RMRSROHolosun 407C507C footprint.

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.This GREEN dot comes with a picatinny mounting base.. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.This GREEN dot comes with a picatinny mounting base. Other handgun mounting plates are not included.. It is fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided 1 mount, however the front switch of the sight needs to trim down 2mm.. 3 MOA. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. ADE RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.RD3-011 only Fits Trijicon ftprt.

Promotes rapid target acquisition while providing a precise point of aim getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery. The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield Ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. 1.75 length x1.25 width x1.15 height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation adjustments with audible click. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting plates for hunguns sells separately.

We have made several improvements since it's initial release in 2014. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.. WaterproofShockFog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.. This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 batteryIncluded. Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight..

Optic Shim is made to fit between the red dot and the mounting plate.. Fits Shield RMSRMSCRMSWSMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Does NOT fit Trijicon RMRSRO, Doctor, Vortex VenomViper, Burris Fastfire, ADE RD3-006009012013. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. .. Scope base shims Tolerance -.005 Taper 1.0 degree.

IMPROVED ACCURACY - Quick and easy to zero while holding up to strong recoil, this GlassFalcon Red Dot scope promotes rapid target acquisition with a crisp and clear 3 MOA dot.. EASY TO USE - The unique design of our gun sights makes for a hassle-free mount on just about any rifle or pistol setup. A lightweight, compact profile and intuitive controls ensure ease of operation.. HIGH-END OPTICS - All of our rifle and glock sights are tested by optics experts in the USA. The shockproof reflex Sight 3 MOA has been tested for 1000 rounds on all types of guns without losing your zero.. 100 SHOT VISIBILITY - The HD glass offers unbeatable clarity, with 10 brightness levels 8 day, 2 night for any lighting conditions. Perfect for target practice at the range, competitions or hunting. VERSATILE COMPATIBILITY - The weaverpicatinny rail mount is compatible with Vortex, Aimpoint, Holosun, Burris RDS, and more. Its scratch, water, and shockproof, and includes screws and wrenches..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. ADE Nuwa is manual activated by pressing the onoff switch. Press and Hold switch for 2 seconds to turn onoff, quick press to adjust the brightness from low to high.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This FDETAN body color RED Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADEs popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADEs FDE color will not 100 match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter. ADE Spike also available in Black body and RED Dot. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum in FDE body and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dotthis one and FDETAN body 4MOA Red dot.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Reliable Gun Sights This red dot sight for pistol designed specifically for modern everyday carry. Compatible with all Shield RMS and Shield RMSc footprints. It's right size provides maximum concealability, reliability, and the rapid target acquisition you need.. Suitable Pistols TP9 SC, TP9 SUB METE, METE MC9, METE MC9 TAC, TP9 SUB ELITE, TP9 SF METE-S, METE SFX, METE SF, METE SFT. P365XLP365X, Max-9, G43X MOSG48 MOSnot compatible non-MOS Gs, Hellcat OSP, Shield 2.0 Optics Ready, MP shield plus performance center, PPS M2 Optics Ready, MC1911SC Ultimate or any pistolmountslide with RMSRMSC screw patternsfootprints.. Shake Awake Technology The red dot automatically turns off its illumination if no motion is detected for a period, conserving battery life. It quickly awakens with the slightest tap or tilt, ensuring it's ready when needed.. Lock Mode The pistol red dot has a lock mode to prevent accidental adjustments, providing added security while carrying and using the device.. Durable Construction Constructed from aerospace-grade aluminum alloy, the FXV22 pistol optics is designed to withstand heavy recoil and is water-resistant up to 5 meters.. Lifetime Warranty Foxarmy offers a lifetime warranty for all their products, ensuring peace of mind for customers. If the FXV22 fails to perform as intended, they provide free repair or replacement..

The fastest, most accurate, ultra-compact micro reflex sight the ROMEOZero has been optimized for everyday concealed carry and guns with slim slide profiles. The sight features a ruggedized, textured polymer body and the SpectraCoat HD Polymer lens system with 10 times the impact resistance over traditional glass lenses. Stippling pattern on the housing matches P365 and P365XL grip pattern, for an integrated look 8 vivid, user-configurable daytime illumination levels. MOTAC Motion Activated Illumination System that powers up when it senses motion and powers down when it does not Parallax free. Highly efficient, point source LED emitter for a crisp dot that is 8 times more efficient than conventional red dots.