Top 10 Best Cooling System Pressure Tester Kit

Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system.Can also be used on cooling systems pipe.. Helps locate air leaks in turbo system components by plugging the output side of the turbo and the intake inlet.. Pressure loss can be located easily by hand or leakage spray.. 4 pairs of stepped adapters to fit most turbo systems on cars and light trucks. Adapters range from 1-38''35mm to 3-12''90mm. Pressure gauge with shut off valve regulator to help prevent over pressurisation..

Allows you to quickly and easily diagnose leaks and other cooling system issues.Fit Type Universal. Includes 17color-coded adapters and 3 test caps to fit most import and domestic vehicles. Includes vacuum purge and refill tools to prevent air intrusion and eliminate cooling system bleeding time. Working pressure of 0-35 psi. Mishimoto Lifetime Warranty.

Function --- This radiator pressure tester kit allows you to change coolant and test for leaks in your vehicle's cooling system, including the radiator, heater core and radiator cap, in a simple and straightforward manner.. Premium Quality --- Made of high quality and durable material, high strength and toughness, providing higher stability and longer service life.. Note --- If the temperature is too high, you may get scalded. Before you open it, make sure the tank is cool when you use it.. Easy to Use --- Remove the original radiator cap, select an available radiator cap from the test kit, and install it on the radiator port. Operate the hand pump until the pressure reaches 10-15psi avoid reaching 35psi. Check the pressure gauge reading. If the reading drops automatically, the radiator may be leaking. Have the radiator system checked and repaired if necessary. Typically, it takes about 10 minutes to test for leaks and is a very quick and easy operation.. Packing list --- 1pressure test pump with pressure gauge, 1 thermometer, 4chrome-plated steel cap adapters, 8anodized cap adapters, 1adapter handle, 1carrying case. Sturdy and durable, widely compatible with various brands of cars please refer to the pictures below for specific car models.

Hand Pump Leak Detector The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2 rubber nylon resin hoses, brass fittings, solid and durable. 3 large dial gauge with index range 0 to 35psi 0 to 2.5bar, easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly.. Leak Detection Tool The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem. Easy To Use Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi Avoid up to 35psi. Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate.. Wide Application Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible for Cadillac, Benz, Buick, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab etc NOT for BMW e46 Expansion Tank. Package Included 1 x Pressure testing pump with gauge 1 X Thermometer 4 X Chromed Steel Cap Adapters 8 X Anodized Aluminum Cap Adapters 1 X Carrying Case.

28PC Universal Radiator Pressure Tester Vacuum Coolling System KitEquipped with 17 test caps for testing cooling systems on most domestic and import vehicles, such as Compatible With VW, BMW, Ford, Opel, Porsche, Audi, etc. Working pressure is from 0 to 35 psi. It will be a good helper in your daily life.. 28pcs Universal Radiator Pressure Tester KitPressure Tester Automotive Equipped with a bold molded case, which keeps your kit organized, providing you a convenient way to tester. Besides, with the case, you could easily bring this radiator pressure tester set to anywhere you needed.Color coded radiator test caps aid with identifying which cap is needed for each application, so its easy for you to choose the suitable test cap for the job without messy.. 28 PCS Radiator Pressure Tester Comes with various instruments, which help you solve any problem about radiator pressure conveniently and quickly.Special design of vacuum purge and refill tool connection allows easy testing for leakage in radiator system and quick change of coolant. With this pressure tester, you could easily do the job.. Radiator Pressure Tester KitSize of Carry Case 23.6x19.3x4.1LXWXH Working Pressure 0 - 35 psi Product Weight 12lbs.Compatible with Acura, Mercedes Benz, GM, Peugeot, Subaru, Chrysler, Mitsubishi, Nissan, Mazda, Infiniti, Geo, Suzuki, Isuzu, Honda, Acura, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Copper, VW, BMW, Ford, Opel, Porsche, Audi, etc.. 28pcs coolant pressure tester with coolant refill tool28pcs Universal Radiator Pressure Tester and Vacuum Type Cooling System Kit,The items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers.

A comprehensive coolant system pressure test refill kit locates system leaks from header and expansion tanks and fittings, head gasket, radiator core, heater matrix, water pump, hoses and pipes, and is designed for refilling radiators with coolant without introducing air pockets.. The hand operated pressure pump and vacuum refiller is fitted with an accurate and easy to read gauge marked in both psi and bar. The Connections of vacuum refiller are constructed with metal, which has more stability and suction.. The thermometer is designed to aid diagnostics and also ensure the system is cool before removing the cap.. The different colors on each test cap will help operators working much more efficiently to choose suitable cap and work.. 17 Pieces color coded test caps are designed for testing cooling systems on most domestic and import vehicles. Is compatible with Mercedes-Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper, VW, BMW, Ford, Opel, Porsche, Audi, etc..

Professional Tool The cooling system pressure test kit allows for quick and easy testing of leaks in the radiator system and quick coolant replacement.The tester helps to detect internal and external leaks and is very suitable for cylinder head gasket failure detection. Superior Performance This kit can help you find internal and external leaks in the cooling system.Compression pump with pressure gauge can easily test the pressure. It is suitable for testing the pressure of radiator and coolant circuit.. Easy to Use Special design of vacuum purge and refill tool connection allows easy testing for leakage in radiator system and quick change of coolant. With this pressure tester, you could easily do the job.. Wide Application Cooling system pressure tester and coolant bleeder kit is equipped with 25 specific adapters, suitable for commercial,vehicles,trailers,RVs,automobiles,motorcycle, etc.. Blow Molded Case Equipped with a bold molded case, which keeps your kit organized, providing you a convenient way to tester. Besides, with the case, you could easily bring this radiator pressure tester set to anywhere you needed..

28pcs Universal Radiator Pressure Tester and Vacuum Type Cooling System Kit. Allows easy testing for leakage in radiator system and quick change of coolant. Color coded radiator test cap makes it easy to choose the suitable test cap for the job. Special design of vacuum purge refill tool connection, test Range 0 - 35 psi.. One more adaptor than 27pcs kit suitable for domestic and import vehicles..

3 in 1 Cooling System Tool Kit This radiator cooling pressure tester has 3 functions coolant pressure tester, coolant refilling temperature measurement. Manual pump cooling system pressure tester can diagnose whether the radiator is leaking and help quickly bleed the waste coolant if needed. Pneumatic vacuum fill coolant tool vacuumizes to eliminate trapped air in minutes and refills cooling system with no air bubbles produced. Thermometer checks if the toyota coolant temperature is too high.. 17 Color Coded Caps This coolant funnel kit equipped with 17 test caps, the color coded radiator test caps aid with identifying which cap is needed for each application, so its easy for you to choose the suitable test cap for the job without messy.. Premium Quality The universal radiator tester tool is made of high-quality aluminum alloy, rubber and nylon, with better sealing, higher strength and good toughness, providing higher stability to prolong service life, and better vacuum effect it is good.. Wide Application Coolant pressure tester kit fits GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other domestic and foreign cars, trucks, airlifts, etc., while working with 21PCS dedicated adapters for one-person operating. Fits most models while working with the cone universal adapter, but 2 people are required to operate one person holds the cone head and the other one pumps up. Manual tester pump with gauge calibrated from 0-35psi 0-2.5bar.. Storage Case Equipped with a blue molded storage case, the combustion leak tester keeps your kit organized, providing you a convenient way to tester. Besides, with the case, you could easily bring this radiator pressure tester set to anywhere you needed..

Unit is suitable for domestic and import vehicles. Special design of vacuum purge and refill tool connection fits nearly all types of radiator openings. Blow molded case.

The hand pump leak detection tool pressurizes on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure and show the fracture position, such as the tank, hose, a loose connection, etc. With our radiator pressure tester kit, you can check regularly, repair promptly and avoid leak result in the reduction of coolant and boiling point, high engine temperature, low oil viscosity and other serious problems.. Specification The coolant pressure tester kit uses aluminum pump cylinder rather than plastic one, 21.2 rubber nylon resin hoses, brass fittings, solid and durable. 3 large dial gauge with index range 0 to 35psi 0 to 2.5bar, easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly.. Easy To Use Remove the original radiator cap, choose an available radiator cap from the coolant vacuum refill kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi Avoid up to 35psi. Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate.. Wide Application cooling system pressure tester kt is equipped with 12 specific aluminum adapters, solid and durable, widely compatible for Cadillac, Benz, Buick, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab etc NOT for BMW e46 Expansion Tank.. Package Included 1 x Pressure testing pump with gauge 1 x Thermometer 4 x Chromed Steel Cap Adapters 8 x Anodized Aluminum Cap Adapters 1 x Carrying Case..