Top 10 Best Crimson Trace Red Dot

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint PlateSlide seamlessly.. The onoff switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.. Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.. Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.. If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability 99 that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.. ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cutoptic plate that is compatible with shield RMSRMSCDeltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cutoptic plate that is compatible with Trijicon RMRcc footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cutoptic plate that is compatible with Trijicon RMRSROHolosun 407C507C footprint.

DIMENSIONS 1.57 L x 1 W x .9 D and a weight of 1 ounce - Compatible with Shield RMS and Jpoint footprints. RUNTIME 20,000 hours of battery life that runs on 1 CR1632 battery included. EASE OF USE CT Radiant ambient light sensor automatically adjusts reticle brightness. ACCURACY Sight features 3 MOA red dot reticle for easy target acquisition and integrated co-witness sight for added confidence. DURABLE Constructed from aerospace grade aluminum with recessed optic lens for added protection IPX4 water resistant. GUARANTEED This product is covered by the Crimson Trace Protect Limited Lifetime Warranty. For questions or concerns regarding warranty, please visit the Crimson Trace website..

DIMENSIONS 1.81 L x 1.13 W x 1 D and a weight of 1 ounce - Compatible with Docter Footprint. RUNTIME 20,000 hours of battery life that runs on 1 CR1632 battery included. EASE OF USE CT Radiant ambient light sensor adjusts reticle brightness and CT Motion shake-to-wake sensor automatically activates reticle when drawn. ACCURACY Sight features 3 MOA green dot reticle for easy target acquisition and integrated co-witness sight for added confidence. DURABLE Constructed from aerospace grade aluminum with recessed optic lens for added protection IPX7 water resistant. GUARANTEED This product is covered by the Crimson Trace Protect Limited Lifetime Warranty. For questions or concerns regarding warranty, please visit the Crimson Trace website..

SIG SAUER RED DOT SIGHT - The fastest, most accurate, ultra-compact micro reflex sight, the ROMEOZero 1x24mm pistol sight has been optimized for everyday concealed carry and pistols with slim slide profiles Enables rapid target acquisition Parallax free. RUGGED DURABLE - This red dot sight features the SpectraCoat HD Polymer Lens with 10 times the impact resistance over traditional glass lenses Rugged WeaponsGrade textured polymer body gives this pistol sight a great level of drop protection. HIGH PERFORMANCE - MOTAC Motion Activated Illumination System powers up when it senses motion and powers down when it does not Highly efficient, point source LED emitter provides a crisp dot that is 8 times more efficient than conventional red dots. COMPATIBILITY - Direct mount to ROMEOZero Shield RMS-c footprint J-Point footprint This handgun sight is NOT compatible with slides cut to accept a standard ROMEO1 Housing optimized for use with Polymer pistols, concealed-carry and slim slide profiles. SPECIFICATION - Magnification 1x Objective Lens Diameter 24mm Battery 1 CR1632 Reticle 3 MOA Red Dot Overall Length 1.6 in Overall Width 0.93 in Height 0.93 in Weight 0.4 oz Illumination Settings 8 Daytime Run Time 20000 hrs.

ACCURACY Sight features a bright 2.0 MOA red dot reticle for easy target acquisition, fully adjustable for windage and elevation. VERSATILITY 10 levels of brightness with intelligent power management. EASE OF USE Externally accessible battery compartment means battery can be easily changed without removing the optic or affecting the zero for practical use in the field. DURABLE Shock, impact, fog and vibration resistant design for extreme durability with advanced notch coating for maximum clarity. EASY INSTALLATION Multiple mounting options with quick disconnect QD Picatinny rail mount, full co-witness height for optimal mounting on M1913 style platforms.

The Viper Red Dot Sight has a super low-profile making it perfect for use with cut-out slides. 1 MOA windage and elevation adjustments are super sleek and make sighting in a breeze.. The Viper's low height allows it to co-witness with iron sights and the 6 MOA dot is easy to pick up and get you on target fast. Power and illumination controls are easy to access and adjust.. The fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view while Armortek coatings protect your lens from oil, dirt, and scratches.. Waterproof and shockproof construction ensure your Viper Red Dot is ready for all conditions.. Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damageddefective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance..

ACCURACY Sight features a bright 3.5 MOA red dot reticle for easy target acquisition. LOW PROFILE The compact, snag-free design ensures this sight won't slow you down when using your long gun. EASE OF USE The battery can be changed without removing the optic or affecting the zero for practical use in the field. DURABLE Shock, impact, fog and vibration resistant design means your sight will withstand normal use. EASY INSTALLATION Industry standard mounting interface with low profile M1913 Picatinny Mount included.

Matte black featuring a 3 MOA Dot reticle with 11 brightness settings Mounts easily on most picatinny rails and is compatible with pistols, shotguns, rifles and muzzleloaders.Adjustment Range 70 MOA. Waterproof construction O ring sealed optics stay dry inside, even when totally immersed in water. Parallax - 50. Shockproof construction Built to withstand bumps, bangs, drops and the rough and tumble environment of the field. Nitrogen purged fog proofing Nitrogen inside the scope ensures interior optical surfaces wont fog due to humidity or rapid temperature change.

BRIGHTNESS Features a 200 Lumen LED tactical white light with a broad beam for maximum versatility. EASE OF USE Instant Activation ambidextrous Tap-On Tap-Off Controls for immediate light activation from either side of the unit. RUNTIME Over one hour of battery life powered by 1 CR2 battery included. DURABLE Flashlight is made of Anodized Aluminum, is water resistant IPX4 and impact resistant up to 1 meter. FITS Most pistols, rifles, and shotguns with M1913 Picatinny or similar Accessory Rail with at least 1 between the recoil lug and the trigger guard. GUARANTEED This product is covered by the Crimson Trace Protect Limited Lifetime Warranty. For questions or concerns regarding warranty, please visit the Crimson Trace website..

Sig Sauer Romeo 7, Sight, 1X30mm, Fits M1913 Rail, GraphiteFinish, Full Size, 2 MOA Red Dot, 0.5MOA Adjustments SOR71001.

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance. Includes a M1913 Picatinny low mount riser and a co-witness 1.41in riser mount.