Top 10 Best Cyelee Cat Pro

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint PlateSlide seamlessly.. The onoff switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.. Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.. Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.. If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability 99 that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.. ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cutoptic plate that is compatible with shield RMSRMSCDeltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cutoptic plate that is compatible with Trijicon RMRcc footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cutoptic plate that is compatible with Trijicon RMRSROHolosun 407C507C footprint.

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dotthis one and FDETAN body 4MOA Red dot.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

IMPORTEDFits the following - Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Canik METE MC9 Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with ANY non-MOS Glocks, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP shield plus performance center, SW Equalizer, SCCY DVG-1 RDR, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolsmountsslides with RMSRMSC screw patternsfootprints.. Slim Low ProfileBack height 8mm including iron sights The CAT PRO has a very thin frame making it perfect for handguns with slide cuts. Offers simplicity and speed with the ability to co-witness. useful for rapid alignment and 5-25ft self-defense engagement, the CAT PRO may not perfectly co-witness with your pistols standard front irons. LOCK MODE This optic has Lock Mode, which prevents unintentional button presses from making any changes to settings when activated, and has a side access battery tray, allowing change of batteries without removing the optic from the firearm.. Shake N Awake MOTAC Motion Activated Illumination System that wakes up when it senses motion and goes to sleep when it does not for extended periods. Provides optimum operational safety while still having up to 50,000 hours of battery life. . Super Led Our highly efficient, point source LED emitter, for a crisp dot that is 8 times more efficient than other conventional red dots..

Micro red dot sight fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP shield plus performance center, SW Equalizer, SCCY DVG-1 RDR, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. EASE OF USE Cyelee CAT Green Dot Sight is always powered on with shake awake function. After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting.. RUNTIME Operates with a single CR2032 3v battery. With our advanced technology, to give you up to 50,000 hours of battery life.. RELIABLEReliable Design, a concealed carry optic must be ultra- dependable, because you are literally betting your life that it will be ready when called upon. CAT Green Dot Sight is waterproof and shockproof. The integrated co-witness notch provides an added sense of security in critical situations and allows for multiple aiming options.. DURABLE Constructed from aerospace grade aluminum with recessed optic lens for added protection IPX6 water resistant. DIMENSIONSCAT is really small. About an inch tall, an inch wide, and 1.6 inches long. Shoehorned into this tiny sight is a 22mm x 16mm window, big enough for fast acquisition and sight tracking, and small enough that it doesnt affect concealment at all. CAT will fit any slimline slide with an RMSc footprint incorporated..

Designed to fit the following - Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with ANY non-MOS glocks, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmountslide with RMSRMSC screw patternsfootprints.. EASE OF USE The Cyelee CAT red dot sight is always ready with it's shake awake function while powered on. After four minutes without motion, it automatically goes into sleep mode. Even the smallest tap or tilt will wake it up immediatly.. RUNTIME Operates with a single CR2032 3v battery. With our advanced technology giving you up to 50,000 hours of battery life. . RELIABILITY Designed for concealed carry, it's a must to be ultra- dependable. The CAT is waterproof and shockproof with integrated co-witness fiber optic irons, providing an added sense of security in critical situations and ensuring you always have a backup option.. DURABILITY Constructed from aerospace grade aluminum. with a recessed optic lens for added protection. and IPX7 waterproof. DIMENSIONS The CAT is really small, about an inch tall, less than an inch wide in the back, and 1.6 inches long. Shoehorned into this tiny sight is a 22mm x 16mm window, big enough for fast acquisition and sight tracking, and small enough that it doesn't affect concealment. The CAT will fit any slimline slide with an RMSc footprint..

The Cyelee WOLF PRO micro red dot sight is designed to fit any pistol mountplateslidecut that is compatible with RMRSRO and 407C507C508T footprint red dots.. Slim Low ProfileBack height aprox. 8mm including iron sights The super-low mounting height makes it the perfect solution for handguns with optic ready slides. Offers the simplicity and speed advantage of a red dot, while co-witnessing with most OEM iron sights.. LOCK MODE This optic has a Lock Mode that prevents unintentional button presses while the optic is holstered. Features a side access battery tray, allowing the operator to change the battery without removing the optic from the firearm.. Shake N Awake Motion Activated Illumination System that powers up when it senses motion and powers down when it does not, provides for optimal operational safety and enhanced longevity, with up to 50,000 hours of battery life. . Super LED Highly efficient, point source LED emitter for a crisp dot that is 8 times more efficient than comparable conventional red dots..

The Cyelee WOLF2-G Compact Green Dot Sight is designed for the RMR footprint. It is compatible with any pistol mounting plate, slide cut, or system made for the RMRSRO, as well as for the 407C, 507C, and 508T red dot sights.. The standout feature of the WOLF2-G is its Green Circle Dot reticle, which provides shooters with a combination of a circular shape and a central dot for fast target acquisition and precise aiming. With its aircraft-grade aluminum housing, the WOLF2 is built to withstand both rugged as well as everyday usage, ensuring durability and reliability in various shooting environments.. The Cyelee WOLF2-G features MDS Mode, or Motion Deactivated Standby technology to help save battery life. While the optic is powered on, after 5 minutes without motion, the red dot goes to sleep. It will not be visible until moved but even the smallest tap or tilt will wake it up within a second to the previous brightness setting. This allows storage without wasting battery while still being ready when you need it.. Fully multi-coated glass offers both a distinct reticle as well as a clear and untinted picture. Choose between 10 brightness levels including 2 dim enough for enhanced brightness opticsinvisible to the naked eye.. This Circle Dot Sight comes ready to use on your rifle or shotgun with the included optional picatinny adapter. Tested in freezing conditions, fully submerged, and under high pressure water streams it is ready for both rain or snow..

The Cyelee WOLF0 Compact Red Dot utilizes the RMR footprint. It will fit any pistol mounting plateslidecut that is compatible with RMRSRO, and 407C507C508T red dots.. The Cyelee WOLF0 feature Shake Awake motion sensing technology to help save battery life. While not turned off, after 5 minutes without motion, the red dot goes to sleep. It will not be visible until moved but even the smallest tap or tilt will wake it up within a second to the previous brightness setting. This allows storage without wasting battery life while still being ready in a second when you need it.. The WOLF0's MOA Red Dot allows for clear and rapid target acquisition while providing a precise point of aim get shots down range and on target fast. The aircraft grade aluminum housing ensures this unit will stand up to rough usage as well as it does to normal daily use.. Fully multi-coated glass offers both a distinct red dot as well as a clear and untinted picture. Choose between 10 brightness levels including 2 dim enough for enhanced brightness opticsinvisible to the naked eye.. The Red Dot is ready to use on your rifle or shotgun with the included optional picatinny mount adapter. Tested in freezing conditions, fully submerged, and under high pressure water streams. More than capable for use in the rain or snow..

DIMENSIONS 1.81 L x 1.08 W x 1 D - Compatible with Docter style footprints.. SHAKE AWAKE MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it senses long periods of inactivity.. ACCURACY Sight features 3 MOA red dot reticle for easy target acquisition and integrated co-witness sight for added confidence. DURABLE Constructed from aerospace grade aluminum with recessed glass for added protection IPX7 waterproof. EASE OF USE Top-accessible battery compartment allows you to change the battery without removing your optic from your handgun..

Zulisy OAK features Shake to Wake. After 4 minutes without motion, your red dot goes to sleep. It automatically turns on when it is moved, effectively extending the battery life. A single CR1632 battery can be used for up to 50,000 hours of operation. Shake to Wake will NOT work when manually turned off. This 3 MOA micro red dot sight is RMRSRO footprint compatible. It comes with picatinny adapter and as several screws with commonly used thread patterns.. Utilizes tactile 1 MOA per click windage and elevation adjustments. With 10 different brightness settings, including 2 for use with nighttime enhanced brightness devices.. This optic is IPX7 Waterproof. With a top-loading battery that makes changing a breeze, you will not have to dismount the optic. The solid aluminum unibody housing ensures this unit is ready for rugged situations.. Zero parallax at 50 yards. Tactile high activation pressure, flush sitting buttons, for use with open or concealed carry to prevent accidental button presses..

MOTION SENSOR The T10 Red Dot automatically turns on when it is moved and will auto shut off if not moved for 1-3mins.You need to press power on button to use this function. 50,000 HOUR BATTERY LIFE 1 CR2032 battery will last up to 50,000 hours of use with a crisp 2 MOA Red Dot with 10 brightness settings for visibility in all light conditions.. IMPROVE YOUR ACCURACY SPEED UP TARGET ACQUICITION Adjustments Windage and Elevation at 12 MOA Click. HD Glass Lens is pretty clear with multi-coating for ENHANCED CLARITY AND CONTRAST and provide a CRISP 2-MOA red-dot reticle for PRECISION AIMING.. RUGGED DESIGN The T10 is a one-piece Aluminum construction that is Fog Proof, Shock proof, Water proof up to 3 meters.. We made it more durable to withstand various recoil and improved the ability to hold zero. 3 Year Warranty Come with Low Profile and Absolute Co-witness 1913 Picatinny Mount..