Top 10 Best Dji Controller Tablet Holder

Specially design for DJI RC N1 Remote ControllerMavic 3,Mavic 3 Classic,DJI Mini 2,Mini 2 SE,Mini 3,Mini 3 Pro,DJI Air 2S,Mavic Air 2 remote controller. Wide range of application Support most 4.7-12.9 inches tablet and phone.Not fit 4 inch phone or phones less than 124 mm in length. Quick and easy installation and removalAfter familiar with the usage, one-second installation and one-second removal can be realized with just one button. HighlightsThe holder is fixed on the antenna storage slot, that it will not put stress on the antenna. The holder can be adjusted above or in front of the remote controller, and can be adjusted to not cover the battery level leds or even the buttons. The adjustment range is large to meet different operating preferences.. Precise adjustment The holder has two joints,which can adjust the angle of the arm and the clip flexibly, simply and accurately. Sturdy and stable The holder has good supporting force and can support a weight within 1.4 b 640g. Hold the controller normally, the tablet can maintain a stable position. You can use accessories such as sunshade. Product weight 6.88 ounces 195g. Made of strong and lightweight material. Foldable design, easy to carry and store. What You Get 1 x tablet holder, 1 x neck lanyard strap.Our worry-free 12-month warranty and 100 money back guarantee.

No need to disassemble After using this DJI Mini 2 tablet stand, you dont need to remove it, it can be directly folded on the remote control, and you dont need to install it again next time. You can use it directly. Very stable Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling. Comfortable oblique vision Observing tablet at an oblique angle could prevent reflections under sun. Anti-scratch anti-slip Anti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the plate from scratching. Wide compatibility Compatible with almost all 7-12 inch tablet computers on the market the width of the tablet is between 11cm-19cm, including iPad Mini 7.9, iPad 9.7, iPad Air 10.5, iPad Pro 11, Galaxy Note 10.1, Galaxy Tab S7 11, etc. You dont even need to take off your tablet case. Note iPad Pro 12.9 is not supported. Applicability for DJI Mini 3 Pro, DJI Mavic 3, DJI Mini 2, Mavic Air 2 and Mavic Air 2S. Packing list 1 Tablet Holder 1 screwdriver 1 type C to Type C data cable11.8 1 type C to IOS data cable11.8 1 remote control lanyard. Note please connect the Type-C interface with the data transmission logo to the remote control.

Aviation aluminum-alloy and high quality ABS made, CNC technology for impeccable smoothness. Perfectly compatible with DJI Mavic Mini 2 DJI Mavic Air 2 Mavic Mini Mavic 2 Pro Mavic 2 Zoom Mavic Pro Mini SE Mavic Air Platinum DJI Spark Remote Controller.. Support 4-12 inch Phone Tablet, widely compatible with iPad Pro Not Suitable for 12.9 inch, iPad Air 21, iPad Mini 432, Samsung Galaxy Tab S243A, Nexus 97wide up 4.72 only, Nivida Sheild K1 and most other tablets between 7 inch-12inch.. 360 rotation and 45 up and down, offer a clear and good view, only 2 steps to snap on off with no tools foldable and iphone sized, light weight, convenient to carry outside with other MavicSpark accessories together.. Supports hanging strap included Tablet sunshade, perfectly solved the trouble that no place to hang a strap on MavicSpark controller, free your hands during flight Tighten Stable,will stay in the place you need.. WHAT YOU GET - 1 x Tablet Bracket Mount, 1 x Shoulder Neck Strap our worry-free 12-month warranty and 100 money back guarantee..

The Upgraded Portable Tablet Holder compatible with DJI Mini 2, DJI Mini 2 SE, DJI Mini 3, DJI Air 2S, DJI Mavic 3 CineClassic and DJI Mavic Air 2 Remote Control, can hold all tablets that width between 4.33 and 7.20 inches. Simple and easy, no need to disassemble each time, fold the holder then you can easily put it into your backpack together with your remote control. Two slots and two screws ensure that the ipad holder is firmly fixed to the remote control. Compact and durable but only weight 1.75 oz. Folding and puting away this tablet holder does not affect the contraction of the original built-in phone holder. After-Sale Service 1 year warranty. Any questions or quality issue will be answered or solved within 24 hours.

Compatible With DJI Mavic Mini,DJI Mini SE,Mavic 2 Pro,Mavic 2 zoom,Mavic Air,Mavic Pro Platinum,DJI Spark remote controller. Wide range of application Support most 4.7-12.9 inches tablet and phone.Not fit 4 inch phone or phones less than 124 mm in length. HighlightsThe problem of insufficient tightening and unstable position of traditional nuts is solved. All adopt joint design, which is more convenient, fast and stable to use. Precise adjustment The holder has two joints,which can adjust the angle of the arm and the clip flexibly, simply and accurately. Sturdy and stable The holder has good supporting force and can support a weight within 1.4 b 640g. Hold the controller normally, the tablet can maintain a stable position. You can use accessories such as sunshade. Product weight 9.7 ounces 274.85g. The base is aluminum alloy. Arm and clip are high quality plastic.Foldable design, easy to carry and store. What You Get 1 x tablet holder, Our worry-free 12-month warranty and 100 money back guarantee.

Full Aluminum Alloy Bracket and HolderMake of full aluminum and high-quality ABS material Perfect fit with DJI Mavic Air Mavic Pro Mavic 2 DJI Spark Mavic Air 2 Mavic Mini 2Mavic Pro 2Mavic Air 2s Mini 3 Remote Controller. Foldable DesignFoldable design for convenient storage with adjustable view angle according to personal needs. Multiple ApplicationsStretchable design for smartphone tablet, stretchable length115mm4.5in-180mm7.1in, adjustable bracket to be horizontal for smartphone and vertical tablet. Additional Functions Using as normal table holder and enjoy your time with large screen tablet,it is also suitable for Crystal Sky Monitor. Hollow-carved Design Light weight could be convenient for your operation,reduce weight only weighs 225g.

Specially design for DJI FPV Remote Controller 2. Connection Install DJI Fly APP, use the included data cable to connect the tablet and FPV glasses. Turn on the switch of the FPV glasses to display the image. Wide range of application Support most 4.7-12.9 inches tablet and phone.Not fit 4 inch phone or phones less than 124 mm in length. Quick and easy installation and removalFasten or loosen the buckle. Precise adjustment The holder has two joints,which can adjust the angle of the arm and the clip flexibly, simply and accurately. Sturdy and stable The holder has good supporting force and can support a weight within 1.4 b 640g. Hold the controller normally, the tablet can maintain a stable position. You can use accessories such as sunshade. What You Get 1 x tablet holder, 1 x USB-C cable,1 x IOS cable,1 x Micro-USB cableOur worry-free 12-month warranty and 100 money back guarantee.

Foldable Aluminum Tablet Stand - Cell Phone Holder with Lanyard Compatible with DJI Mavic 2 Pro Zoom Mini SE Mavic Air 2 Spark Drone Remote Controller. Multiple Applications, fits all 3.5-10 inch screen Smart Phone or Tablet, Support DJI Crystal Sky FPV Monitor.. Foldable aluminum alloy base, steady support, no shaking compare to a plastic stand, adjustable viewing angle.. Hollow-carved light weight design, More convenient to grasp and operate the remote controller. Comes with a Free neck strap. This product have two colors Red and Black, If you need black color, please search ASIN B07K2ZZFML. Double-side bracket stretchable, cellphone bracket stretchable from 54-83mm Fits 3.5-5.5 screen phone, Tablet bracket stretchable from 110-190mm Fits 7-10 screen tablet. If you are unsure whether your device is compatible, please measure the dimension of your device..

CompatibilityCompatible with DJI Mini 2Mini 3 ProMini 3Air 2SAIR 2Mavic 3 ClassicMavic 3 Drone RC-N1 Remote Controller to mount the tablet.Hook accommodates tablet width 1cm, can support most tablet PC wearing protective cover use.. AdjustableSuitable for tablets with a width of 5.3-7.8 inch 13.3-20 cm, for iPad 5678, iPad mini 2345 7.9inch, iPad Air 1234, iPad Pro 9.7 inch10.5 inch11 inch. For Galaxy Tab S5eGalaxy Tab S6 Galaxy Tab S7 Galaxy Tab S7 Galaxy Tab A7Galaxy Tab A 10.5. For Fire 7HD 8HD 10. For Lenovo Tab M8Tab M10Tab M10 Plus, etc.Please measure the width of your tablet before buying.. PortableSmall size, light weight, easy to carry. Easy to install and remove.It has two hooks of different lengths that can be rotated,the hook is covered by sponge pad,it wont scratch your tablet.. Durable StableMade of ABS material,wear-resistant, strong support,not easy to break, labor saving, ergonomically designed angle.. What You'll Get1tablet holder mount. You may have to prepare longer RC cables for your tablet,and the cable is not included. .