Top 10 Best Dji Rs 3

FOR DJI GimbalSmallRig Extended Quick Release Plate 3031 is specially designed for For DJI RS 2 RS 3 RS 3 Pro for Ronin-S gimbal. It is used to mount professional or larger cameras on your handheld gimbal stabilizer. For example, it is compatible with Canon C100200300, RED, Komodo on the RS 2 gimbal.. 1.6 LONGER THAN ORIGINAL PLATEThe plate 3031 measures 40mm 1.6 inches longer than the original RS 2 quick release plate to provide additional leverage for larger cameras and provide more room for mounting optional components, such as a rod mount for a follow focus motor, zoom motor, or lens support.. ANTI-TWISTING DESIGNThe plate features both 38-16 and 14-20 camera mounting screws for mounting a variety of cameras. You can add Counterweight Kit 3125 to the rear to balance the stabilizer, attach Lens Support 2850 to protect the lens mount, and Focus Motor Component 2851 to connect the RS 2 original focus motor when the lens is mounted on a large camera body or a camera with battery grip.. 14 COUNTERWEIGHT THREAD ON REARThere is a 14-20 thread on the bottom rear of the plate to add an optional counterweight. It can be used for adding the Counterweight AAW2284 or AAW2285 for balance.. RUBBER PADS MEASUREMENT SCALEPadding on top of the plate protects your camera from twisting or scratching. Measurement markings on the side allow you to keep track of the best plate balancing position for your camera..

FOR DJI DJI RS 2 RSC 2 RS 3 RS 3 ProSmallRig Sling Grip 3028 is specially designed for DJI RS 2 RSC 2 RS 3 RS 3 Pro gimbal. This handle is designed to reduce arm fatigue during low angle shooting and make handling your DJI RS 2 RSC 2 RS 3 RS 3 Pro handheld gimbal easier with this Sling Grip.. 180 DEGREE ADJUSTMENTOffering 180 adjustment via a built-in rosette joint, this ergonomic handgrip gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The rosette joint can be disassembled so the handgrip can be used on its own as a rosette handgrip.. QUICK RELEASE CLAMPThe grip mounts onto the gimbal using a NATO clamp and can support up to 13.2 lb. Also, it features an anti-removal stud to ensure a safe and quick operation. An integrated strap slot allows you to use a separately available neck or shoulder strap for additional support.. ANTI-SLIP DESIGNThe silicon grip is an anti-slip design and gives you more comfort when holding it. Its sleek design and compact structure match perfectly with the stabilizer. Besides, an integrated strap slot allows you to use a separately available neck or shoulder strap for additional support. It can work with SmallRig Shoulder Strap KPAC2466 to reduce the arms burden.. MULTIPLE MOUNTING POINTSMultiple 14-20 and ARRI 38-16 threads are built-in on the handgrip which allows for mounting Magic Arm. With two cold shoe mounts on top and side of the handgrip, it can be mounted with wireless go, sound receiver, and Monitor Mount 2905..

FOR DJI GimbalSmallRig QR Plate for Arca-Swiss 3061 is designed for DJI RS 2RSC 2RS 3RS 3 Pro for Ronin-S gimbal. This plate is used to assist users to directly install an A L bracket for Arca and cage on the gimbal, which can switch quickly between tripods and gimbal, thereby saving users time.. FAST LOCKING WITHOUT TOOLSThe quick-release plate for Manfrotto with a built-in base for Arca-Swiss, can be locked quickly by thumbscrew without any tools.. ANTI-DROP DESIGNIt has an adjustable anti-drop design, which can still achieve the anti-drop function when matched with the original plate for Arca. It can also be pressed to adapt to the L bracket for standard Arca-Swiss and cage on the market.. WIDE COMPATIBILITYThe quick-release plate adopts the original camera plate design, and is compatible with the original Arca-Swiss plate, focus rod mount equipped with DJI RS 2RSC 2Ronin-S RS 3 RS 3 Pro, and has a gear rack at the bottom, allowing the quick-release plate for a slight adjustment.. MATTE SURFACEThe matte surface process to avoid reflections, perfectly matching the gimbal body. Besides, it weighs only 90g and easy to storage..

FOR BALANCING CAMERA ON GIMBALSmallRig Counterweight Kit 3125 is designed to balance cameras with long-lens setups on gimbals by mounting counterweights behind your camera.. COMPATIBILITYIt clamps onto the camera plate via a thumbscrew and is compatible with popular stabilizers on the market such as for DJI Ronin-S, RS 2RSC 2RS 3RS 3 Pro, and for ZHIYUN Crane 2S3SWeebill-S, etc.. STACKABLE VIA 14-20 SCREW AND HOLEThere are multiple 14-20 threaded holes at the bottom, and counterweights can be stacked to meet the balance request in different scenarios.. CONVENIENT FOR STORAGESMALLRIG 3125 is made of aluminum alloy and stainless steel, corrosion resistance. The small shape is convenient for storage, and with strong versatility.. WHAT YOU GETPackage Includes 1 x Mounting Clamp, 2 x 100g Counterweights..

Multi-angle shooting The RS 3 Pro, Ronin-S 2 vehicle expansion accessory enables independent filmmakers to capture natural moments with a clear, smooth and fresh perspective, realizing shooting from a height down. Bullet Point. Long-distance power supply function remote power supply can be realized through the pan-tilt power supply adapter and battery power adapter in conjunction with the handle battery.. Shooting is more professional the pantilt can be controlled by wire through the control handle to achieve remote focus, video, joystick and other control functions.. Diversified usage scenarios suitable for shooting scenes such as vehicles, slides, ropeways, rockers, etc. Bullet Point. Specially designed for DJI RS 3 Pro, DJI RS 2..

FOR DJI RS 2 RSC 2 RS 3 RS 3 ProSmallRig Monitor Mount 3026 is specially designed for DJI RS 2 RSC 2 RS 3 RS 3 Pro gimbal. This mount is designed for adding accessories on both sides of the stabilizer, such as monitor, light, sound receiver, wireless device, action camera, etc.. FIRM LOCKINGThe monitor mount can be installed on two sides of the stabilizer by quick release NATO clamp and features an anti-removal stud to protect your devices from falling.. 165 TILT RANGESmallRig 3026 is adjustable for 165 and can be stopped at any angle without tools. With its compact structure and consistent design fits for DJI RS 2 RSC 2 RS 3 RS 3 Pro, it is a perfect match with the stabilizer.. MULTIPLE MOUNTING OPTIONSThere are two 14-20 threaded holes on top of the monitor mount, and one 14 threaded hole on side of it, which can be attached with Magic Arm 2163 for action camera or other rigs. On top and bottom of it, there is one cold shoe mount which can be attached with a sound receiver, microphone, light, etc.. HIGH CUSTOMIZATIONMatte surface perfectly matches with the industrial design of stabilizer. Please note the max payload is 1.5kg. .

FOR DJIRS 2 RSC 2 RS 3 RS 3 Pro SMALLRIG CAGESSmallRig Quick Release Plate for DJI RS 2 RSC 2 RS 3 RS 3 Pro Gimbal 3154 is designed to attach to camera cage with two 14-20 screws to fit in Gimbals for RS 2 RSC 2 RS 3 RS 3 Pro, and solve the twisting issue that the original Arca Plate only allows being attached onto the cage through one 14 screw.. ATTACHES TO CAGE WITH 14-20 SCREWSThe lightweight aluminum plate attaches to the bottom of a SmallRig camera cage with the two included 14-20 screws and can fit in a standard Arca-type base.. HORIZONTAL ADJUSTMENTSCompared with the original Arca plate, the plate 3154 is extended 10mm longer and increases the range for left and right adjustments to mount cameras in special shapes, such as for BMPCC 4K camera equipped with a cage.. DESIGNED TO MOUNT SMALLRIG CAGESThe distance between the two locking 14 screws is 18mm which is compatible with most SmallRig cages like cage for Sony A7S III 2999, cage for Canon R5R6 2982, cage for Nikon Z series cameras, etc.. SWEET DESIGNThe plate has an open-middle design so you can access the camera mounting screw through the plate. This design allows the plate to stay attached to the cage, and you can easily unmount the camera from the cage to move it between the gimbal and a tripod or other rigs. The plate features rubber pads on top to protect the camera cage from scratches..

HIGH CUSTOMIZATIONSmallRig Side Handle 2786 is exclusively designed for DJI Ronin-SSCRS 2RSC 2 RS 3RS 3 Pro Zhiyun Crane 2SCrane 2V2 Moza Air 2AirCorss 2 Gimbals. This handle reduces arm fatigue and provides accessory mounts when shooting with your gimbals.. SWEET DESIGNThe aluminum handle features a soft, ergonomic silicone design for comfort and a solid grip. It enables you to hold your gimbals with two hands to reduce the weight stress on one hand.. MOUNTING POINTSThis handle connects to the bottom of your gimbal via 14-20 and 38-16 mounting screws. Also, it features multiple 14-20, ARRI 38-16 threads and a cold shoe for accessory attachment, such as the original gimbal tripod, camera plate, and Monitor Mount BSE2346.. UNIVERSALITY FOR BOTH SIDESThe handle can be configured for right or left hand based on your needs.. BUILT-IN WRENCHTo ensure your gimbal is secure onto the handle, a built-in wrench is included, which stores on the bottom of the handle. Besides, the base features rubberized padding to prevent damage to your gimbal as well as to prevent twisting..

FOR DJI Ronin-SSC and RS 2RSC 2RS 3RS 3 Pro Designed for DJI Ronin-SSC and RS 2RSC 2RS 3RS 3 Pro Handheld Gimbal. It provides multiple mounting holes for accessories attachment such as monitor mount 2070. INSTALLATIONS It is fixed on the side of Gimbal for Ronin S SC via two M4 screws after taking off the small plate for DJI which covers the electronic contacts. NATO RAIL Comes with Nato rail for the Nato Side Handle 16882187. MULTIPLE MOUNTING HOLES 14threads could be attached to other accessories like cold shoe ,bracket. 38holes for Arri standard is attached to accessory with locating pins. LIGHT WEIGHT Weight only 0.09 lb 40g. It will not add the weight.

FOR BALANCING CAMERA ON GIMBALSMALLRIG counterweight 50g is designed to balance your camera on Gimbal Stabilizers by adjusting the quantity and position. STACKABLE VIA 14-20 SCREW AND HOLEDesigned for easy stacking, this counterweight features a 14-20 screw on one side and a 14-20 threaded hole on the other to add more counterweights if necessary. SURFACE INCREASE FRICTION DESIGNFor easy installation and detachment, the unsmooth surface features lines to increase friction. MADE OF STAINLESS STEELSMALLRIG AAW2459 is made of stainless steel, corrosion resistance. Optional SMALLRIG 100g Counterweight AAW2284 and 200g Counterweight AAW2285 are provided if needed. MOUNTING PLATE SOLD SEPARATELYIt is compatible with SMALLRIG counterweight mounting platessold separatelyvia a separately available mounting plate, such as Ronin-SC Counterweight Plate BSS2420, Ronin-S Counterweight Plate BSS2308 and other counterweight plates for Zhiyun gimbals.