Top 10 Best Dji Tablet Holder

Specially design for DJI RC N1 Remote ControllerMavic 3,Mavic 3 Classic,DJI Mini 2,Mini 2 SE,Mini 3,Mini 3 Pro,DJI Air 2S,Mavic Air 2 remote controller. Wide range of application Support most 4.7-12.9 inches tablet and phone.Not fit 4 inch phone or phones less than 124 mm in length. Quick and easy installation and removalAfter familiar with the usage, one-second installation and one-second removal can be realized with just one button. HighlightsThe holder is fixed on the antenna storage slot, that it will not put stress on the antenna. The holder can be adjusted above or in front of the remote controller, and can be adjusted to not cover the battery level leds or even the buttons. The adjustment range is large to meet different operating preferences.. Precise adjustment The holder has two joints,which can adjust the angle of the arm and the clip flexibly, simply and accurately. Sturdy and stable The holder has good supporting force and can support a weight within 1.4 b 640g. Hold the controller normally, the tablet can maintain a stable position. You can use accessories such as sunshade. Product weight 6.88 ounces 195g. Made of strong and lightweight material. Foldable design, easy to carry and store. What You Get 1 x tablet holder, 1 x neck lanyard strap.Our worry-free 12-month warranty and 100 money back guarantee.

No need to disassemble After using this DJI Mini 2 tablet stand, you dont need to remove it, it can be directly folded on the remote control, and you dont need to install it again next time. You can use it directly. Very stable Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling. Comfortable oblique vision Observing tablet at an oblique angle could prevent reflections under sun. Anti-scratch anti-slip Anti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the plate from scratching. Wide compatibility Compatible with almost all 7-12 inch tablet computers on the market the width of the tablet is between 11cm-19cm, including iPad Mini 7.9, iPad 9.7, iPad Air 10.5, iPad Pro 11, Galaxy Note 10.1, Galaxy Tab S7 11, etc. You dont even need to take off your tablet case. Note iPad Pro 12.9 is not supported. Applicability for DJI Mini 3 Pro, DJI Mavic 3, DJI Mini 2, Mavic Air 2 and Mavic Air 2S. Packing list 1 Tablet Holder 1 screwdriver 1 type C to Type C data cable11.8 1 type C to IOS data cable11.8 1 remote control lanyard. Note please connect the Type-C interface with the data transmission logo to the remote control.

The Upgraded Portable Tablet Holder compatible with DJI Mini 2, DJI Mini 2 SE, DJI Mini 3, DJI Air 2S, DJI Mavic 3 CineClassic and DJI Mavic Air 2 Remote Control, can hold all tablets that width between 4.33 and 7.20 inches. Simple and easy, no need to disassemble each time, fold the holder then you can easily put it into your backpack together with your remote control. Two slots and two screws ensure that the ipad holder is firmly fixed to the remote control. Compact and durable but only weight 1.75 oz. Folding and puting away this tablet holder does not affect the contraction of the original built-in phone holder. After-Sale Service 1 year warranty. Any questions or quality issue will be answered or solved within 24 hours.

CompatibilityCompatible with DJI Mini 2Mini 3 ProMini 3Air 2SAIR 2Mavic 3 ClassicMavic 3 Drone RC-N1 Remote Controller to mount the tablet.Hook accommodates tablet width 1cm, can support most tablet PC wearing protective cover use.. AdjustableSuitable for tablets with a width of 5.3-7.8 inch 13.3-20 cm, for iPad 5678, iPad mini 2345 7.9inch, iPad Air 1234, iPad Pro 9.7 inch10.5 inch11 inch. For Galaxy Tab S5eGalaxy Tab S6 Galaxy Tab S7 Galaxy Tab S7 Galaxy Tab A7Galaxy Tab A 10.5. For Fire 7HD 8HD 10. For Lenovo Tab M8Tab M10Tab M10 Plus, etc.Please measure the width of your tablet before buying.. PortableSmall size, light weight, easy to carry. Easy to install and remove.It has two hooks of different lengths that can be rotated,the hook is covered by sponge pad,it wont scratch your tablet.. Durable StableMade of ABS material,wear-resistant, strong support,not easy to break, labor saving, ergonomically designed angle.. What You'll Get1tablet holder mount. You may have to prepare longer RC cables for your tablet,and the cable is not included. .

Compatible With DJI Mavic Mini,DJI Mini SE,Mavic 2 Pro,Mavic 2 zoom,Mavic Air,Mavic Pro Platinum,DJI Spark remote controller. Wide range of application Support most 4.7-12.9 inches tablet and phone.Not fit 4 inch phone or phones less than 124 mm in length. HighlightsThe problem of insufficient tightening and unstable position of traditional nuts is solved. All adopt joint design, which is more convenient, fast and stable to use. Precise adjustment The holder has two joints,which can adjust the angle of the arm and the clip flexibly, simply and accurately. Sturdy and stable The holder has good supporting force and can support a weight within 1.4 b 640g. Hold the controller normally, the tablet can maintain a stable position. You can use accessories such as sunshade. Product weight 9.7 ounces 274.85g. The base is aluminum alloy. Arm and clip are high quality plastic.Foldable design, easy to carry and store. What You Get 1 x tablet holder, Our worry-free 12-month warranty and 100 money back guarantee.

Wider Visual Viewing Screen Drone tablet holders support you to mount a big-size iPad or tablet on the remote controller. It can also bring the screen up above the remote so that will not affect the operation of the controller. You can see the screen easier and be able to take better aerial photos and footage, giving you a more interesting flying experience. Notice Please change a longer wire when you use this drone tablet holder. The standard wire might not reach your iPad.. Wide Compatible The drone iPad stand mount fits all phone and tablet sizes from 4.6-12.9 inches screen like iPad Pro, iPad Air, iPad, iPad Mini, smartphone, iPhone 13 Pro Max, etc. Suitable for most DJI drone remote controller such as Mavic Air 2, Mavic 2 Pro, Mavic Pro, Mavic 2, Mini 2, Mavic Mini, MiniPro RC, Mavic 2 Zoom, Mavic Mini 1.. Steady for Unique Triangular Design The drone tablet mount base uses a triangular structure design, so it's very stable. The tension of the spring supporting the clips is extremely strong, and the ball joint can be tightened pretty tightly. Therefore, the iPad or tablet can be kept from shaking or moving during the flight, which is very stable.. 360Rotation 90Inclination Design The tablet stand is 1.96 inches high so that it will not block the controller screen, even with a larger tablet. The ball joint supports 360 rotation of the splint, which can adjust the vision flexibly. And allows you to adjust the angle of the tablet up and down for 45 degrees to get the best view.. Foldable and Light The whole bracket is made of high-grade ABS plastic, durable and pretty light, making you more comfortable when holding the remote control. The foldable design makes it only take a little space in the case or bag. And no tools are required to install or disassemble, which is very simple.. Multifunctional lanyard The lanyard only needs to be installed on the remote control to use it, so that it can be used regardless of whether it is using a tablet holder or just using the clip of the remote control itself to clamp the phone. Allows you to free up your hands to operate other things. The length of the lanyard is 74cm, which can be adjusted at any time. The lanyard is also easy to install and remove, which is very convenient..

Specially design for DJI Air 2S,Mavic Air 2,DJI Mini 3 Pro,Mini 2 remote controller. The holder is fixed on the antenna storage slot, that it will not put stress on the antenna. The holder can be adjusted above or in front of the remote controller, and can be adjusted to not cover the battery level leds or even the buttons. The adjustment range is large to meet different operating preference. The holder has two joints and adopts a shaft structure, which can adjust the angle of the arm and the clip flexibly, simply and accurately. The holder has good supporting force and can support a weight within 1.4 lb. Hold the controller normally, the tablet can maintain a stable position. You can use accessories such as sunshade. Made of strong and lightweight material. Foldable design, easy to carry and store. In the box 1 x tablet holder,Our worry-free 12-month warranty and 100 money back guarantee.

No need to disassembleAfter using this DJI Mini 2 tablet stand, you dont need to remove it, it can be directly folded on the remote control, and you dont need to install it again next time. Very stableIngeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling. Anti-scratch anti-slipAnti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the plate from scratching. Wide compatibilityCompatible with almost all 7-12 inch tablet computers on the market the width of the tablet is between 11cm-19cm, including iPad Mini 7.9, iPad 9.7, iPad Air 10.5, iPad Pro 11, Galaxy Note 10.1, Galaxy Tab S7 11, etc. You dont even need to take off your tablet case. Note iPad Pro 12.9 is not supported. Applicabilityfor DJI Mini 3 Pro, DJI Mini 2, Mavic Air 2, Mavic Air 2S and DJI Mavic 3. Packing list1 tablet mount, 1 screwdriver, 1 type C to type C data cable11.8, 1 type C to IOS data cable11.8. NoteFor a tablet with a 7-inch screen or smaller, please ensure that the width is greater than 4.33 inch, and fix it with a buckle in the middle of the tablet mount In addition, tablet holder is specially designed for tablets and does not support smartphones.

Designed only for DJI Mini 3 Mavic 3 Mini 2 Mavic Air 2 DJI Air 2S remote controller. Weight Only 5.8 OZ with a size 6.5 x 2.6 x 3.7 inch with adjustable view angle make this VCUTECH tablet holder pro a must-have for DJI RC controller. Support up to a maximum of 12.9-inch width phone tablet. Widely compatible with, iPad Air, iPad Mini 543, Samsung Galaxy Tab S5eS4S6A7, Nexus 97, and most other tablets between 4 -12.9 inch, ideal for DJI Mini 3 Pro RC Controller. Made of strong and lightweight material, 360-degree adjustable, flexible design arbitrary rotation with lightweight design. Just snap on to your DJI Mavic Mini3 Mavic 3 Classic Mavic Air 2s remote controller and its good to go. An ergonomic design drone accessories, tested by professional drone pilots, hold your device in a perfect balance, bring your DJI RC-N1 Remote Controller suit with iPad Air and other Tablet. VCUTECH RC Tablet Stand doesn't comes with additional cable, purchase separately if needed. What You Get 1 x RC Tablet Holder Pro. Our worry-free 12-month warranty, and friendly customer service. Satisfaction Guarantee Were proud of our products. If you arent satisfied, well send replacement for any reason within a year of purchase.

DesignCompatible with DJI Mavic Air 2 and Mavic Mini 2 drone controllers,Tablet extended bracket mobile phone extended bracket set. Product Featuressuitable for Mavic Air 2 remote controllers will not only support to work with your cellphone, but also easy to work with your tablet or iPad,. The role of the bracket Extended the Mavic Air 2 controller clip mount up to 3.85 - 5.31 inch, Compatible with iPad Mini and other tablet or mobile phone which width less than 5.31 inch.. Fun GiftThis is a particularly good gift, especially for friends with Mavic Air 2,beautiful appearance, lightweight, small size, easy to carryRemovable, easy to install and disassemble,no need any tools.. Note Not included Mavic Air 2 controller and tablet or other accessories. If you have any questions during the purchase or use, you can write to us at any time, and we will reply to your message within 24 hours.