Top 10 Best Dual Badge Holder

2 CARD HOLDER - PERFECT FIT FOR CAC, RFID, DOD, PIV TWIC SMART CARDS - A Popular Choice for TSA, FAA, DHL Security at Airports Government Facilities. MANUFACTURED IN A GSA FAVORED NATION - Produced with Sturdy Poly Carbonate Plastic - Made in Germany. SLIM LIGHT WITH SECURE SLOT ON BACK - Slot on Back of Holder Is Perfect to Clip any Retractable Badge Reel or Lanyard. IDEAL ACCESS CARD COVERS FOR ANY LINE OF WORK ANY OFFICE- Slots in Holders are Credit Card Drivers License Size, Perfect for Thin Prox Cards. TWO THUMB NOTCH HOLES - Easy to Slide Keycard Out At Scanner or Photo I'd Checkpoint or Insert Chip Reader or Swipe.

Demension Heavy Duty badge holder size WxL 2.5 x 3.7 inch, Fit for all Card size 3.3702.125 85.6mm53.98mm. Sturdy and Durable The Identification Badge Holder material is Hard Plastic avoid from broken,Lightweight but Sturdy and Durable. Horizontal and Vertical Dual-Use Work in both ways,two slot holes allow for easy connection to your lanyard,retractable badge reel. Hold 2 ID Badges Double Side design, Each one can hold 2 standard ID Cards at the same time. Open Face badge holder - Open face on both side,great for different Id showing at same day.

HOLDS TWO CARDS - Holds 2 Standard Credit Card Size ID Cards 1 Front1Back. WORKS IN BOTH HORIZONTAL AND VERTICAL DISPLAY. SLOT HOLES WORK WITH YOUR CLIPS - Lanyards, Badge Reels and More. SPECIALIST ID QUALITY - SPID-AH150. SLIM LIGHTWEIGHT BUT HEAVY DUTY - A Popular Choice For Police, Security, Military, Even Office and Medical - Compatible with Prox, TWIC, CAC, Driver's License, Membership Cards, Work Access Badges, Hotel Key Cards Etc...

2 CARD HOLDER Conveniently carry two key cards, held tight so you never lose your identification.. RFID SHIELDED Protect your credentials with our FIPS201 Approved badge holder, FOR 13.56MHZ CARDS ONLY. INDESTRUCTIBLE Molded from Poly Carbonate for military level toughness and durability.. SLIM DESIGN Looks sharp and available in 9 colors to match your uniform, work or business attire.. USA Designed, Molded and Assembled - Our slim polycarbonate frame is tough as nails and will last you for years.

Hard material made of polycarbonate, this ID badge holder is hard and durable, preventing badges inside from bending or breaking The surface is frosted, which can effectively avoid sun refraction and guard eyes from dazzling light, so that you can clearly see the content of the badge. Vertical top loading the ID card is inserted from the top and has an independent card slot, which can accommodate 2 cards respectively and can be applied independently without interference The card fits well inside and will not fall off from the clear holder easily Fits ID cards with the size of 2.13 x 3.38 inch. Detail design surface thumb notch design, the card can be easily and quickly removed through a thumb while it is tightly embedded inside Top hanger slot, simultaneously meet the needs of handheld and wearing, dual use is more convenient Heavy duty ID card protector can effectively guard the card from damage. Application it can be applied for credit card, ID card, student card, bus card, membership card, access and so on, works for RFID and scanner reader It is suitable for shopping, vacation, business trip, back-to-school day and more, a nice choice for you to take it around. Package include 20 rigid hard plastic ID access badge holders in the package, sufficient quantities are suitable for personal use or group use The transparent micro-frosted texture makes the appearance of each holder more soft, nice for giving to family, friends, children, colleagues, students, police, lawyers, doctors, nurses and so on.

PERFECT FOR TWO BADGES - Horizontal 2-Card Dispenser with Dual Slide out Tabs - Hold Your Debit, Credit, Prox, Metro, Bus, Gym, Library Membership Card, Digital Key, License, CAC, PIV, Building Access Card, College I'D and More. STURDY CARD DISPENSER - Rigid Plastic Solid Construction - Cards Stay in Place and Don't Slide out unless Removed by Extractor Slider. RED SLIDER EJECTORS - Choose which Smart or Swipe Card You want to Extract - Easy Slider Access - No Finger Swiping Hassle. HORIZONTAL SLOT AND CHAIN HOLES - Horizontal Portrait Display for Two Standard Data Credit Card Size 30mil Cards - Attach to Lanyard, Retractable Badge Reel, Strap Clip, Neck Chain or Keychain - Side Loading Card Protector. FROSTED CLEAR VISIBILITY - Great Visibility with Less Glare and Easy Access to Your Cards - Identification is Clear Enough to be Read, Viewed, or Scanned Without Removing from Holder.

Detachable Id Badge Holder The end piece snap into Card Holder lock cards inside never falling out, and can unlock remove cards out with matching key Include . Horizontal and Vertical Dual-Use Work in both ways,two slot holes allow for ways connection to your lanyard,retractable badge reel. Hold 3 Id badges Each Name Card Protector can hold 3 Cards,ideal for office key cards, smart PIV, CAC, and all ISO laminated card drivers license credit card size ,L x W 3.370x 2.125 85.6mmx53.98mm. Sturdy and Durable The Identification Badge Holder material is Hard Plastic avoid from broken to prevent glare off of your photo ID badge and from scratches. RFID Cards in the Id Card Holder can be scanned by RFID and Prox Card scanners, but if inside multi-cards,the middle cards may can't be scanned..

HOLDS THIN BADGES ONLY - NOTHING THICKER THAN A DRIVERS LICENSE - Best for Two THIN Badges Example - Driver's License, Access Key Card or Metrocard Perfect Fit. CRYSTAL CLEAR TRANSPARENT ID VIEW- NON-FROSTED It's So Clear You Can Scan a Barcode Through The Front - Also Works for RFID and PROX Scanner Reader. RIGID HARD PLASTIC BADGE HOLDER - HEAVY DUTY CLEAR POLYCARBONATE - Secure, Strong Protector Cover Prevents Badges from Bending or Breaking. VERTICAL PORTRAIT TOP LOAD INSERT - ID Cards Fit Snug and Won't Fall Out - Load In From the Top - Dimensions Insert - 2.13 x 3.38 2 18 x 3 38. THUMB NOTCHES TO REMOVE I.D. BADGES - Easy to Slide Out to Scan, Swipe, Show, or Tap - Slot Hole Attachment to Use with Lanyard or Vinyl Strap Clip Retractable Reel.

USE ON BOTH SIDES This Plastic Name Badge Holder Size WxL 2.4 x 4.2 inch, Insert Card Size WxL 54x86MM, Top Load. ID Badge Holder easily fits two standard 30mil Id Badges or One Proximity Prox Card, Great for Single Thick Cards, Contactless Prox Cards or even a Medicare Card.. STRONG PROTECTION Hard Plastic Card Holder made of durable polycarbonate PC material, Clear ID Badge Holder can resist UV, dust and water to keep your important paper badges or cards dry, clean and secure effectively protect your card from bending, aging or damage.. ULTRA-CLEAR WINDOW Heavy Duty Badge Holder having both sides are ultra-clear, when you use two cards at the same time, both sides can perfectly display your photo ID card. The use of digital cards is completely unobstructed and can be scanned by RFID and Prox card scanners without removing the card from Badge Card Holder.. PERMANENT LOCKING This ID Protector has upgraded the locking mechanism, once this ID Case used, it cannot be easily disassembled unless it is broken by external force to remove the card. It is recommended to use Clear Card Holder with cards that do not need to be taken out frequently and prevent loss.. MULTI-SCENE USE This clear Vertical ID Badge Holder is suitable for use with lanyards, retractable reel, badge clips. The locking function of Badge Cover is especially suitable for airports, security, law enforcement, including DHS, government employees, police, sheriffs, security employees, private companies loss prevention, etc...

DOUBLE SIDED BADGE HOLDER - Multi Card Capacity - Secure Snug Fit for 2 Standard Credit Card Sized ID Cards - 1 Front 1 Back - Use for Photo ID, Work Access Card, Transit Pass More. HEAVY DUTY BADGE REELS - High Quality Metal Carabiner Clip - Rated for 100,000 Pulls - Light Weight, Sleek Professional Look and Feel. STURDY AND DURABLE - Rigid Hard Plastic Holder - Great for Anyone Needing to Access Two Cards Frequently - Easy Insert and Quick Removal - Open Face Card Sleeve is Great to Scan QR or Bar Codes. SECURE CARABINER HOLD - Nylon Cord Length 34 inches - Perfect Retracting Lanyard to Hook to your Belt Loop, Apron, Backpack, Bag, Purse and More. WEAR HORIZONTAL OR VERTICAL - Perfect Fit for Your Military or Government CAC, PIV, Proximity, Student, Nurse, TSA, FAA, DHS, Airport ID, Law Enforcement, Plastic Subway Transit Pass, Office Key Card, Proxy Name Badge or Standard Photo I.D. Badge.