Top 10 Best Electric Strike

Fail-secure operation - Door remains locked if power to the strike is lost. Includes Stainless Steel No-Cut and Silver-Colored Aluminum Low-Cut Strike Plates. Can be used with virtually any cylindrical door locking system. Can be used with an optional digital keypad, pushbutton switch, and other entry devices. Reversible non-handed design fits either right-hand or left-hand doors.

Field-selectable for fail-safe or fail-secure operation. 2,200-lb 1000kg Jaw strength, Tested to 500,000 cycles. Complete mounting hardware included, Screw terminals for ease of wiring. This Eelectric Door Strike can be used to convert cylindrical lock sets into an electronic access controlled locking system. Attention Before placing order, please check the size of doors frame to avoid wrong purchase.

Fail secure, NO mode Locked when power is removed. This electric strikes with 4-2732 faceplates are designed for use with mortise or cylindrical type lockset with up to 34 latchbolt projection without deadbolt. Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself. The electric strike must be positioned to accommodate offset mortise latches during installation. Designed for Metal Frame drill a hole, then install it directly. Attention Before placing order, please check the size of your doors frame to avoid wrong purchase.

Designed by Visionis, the EL104 is an electric strike lock designed for wood, metal, and PVC doors.. Ideal for simple or advanced access control systems. Impressive 350kg770lbs of magnetic force.. This electric striker has two working modes of fail safe when powered, it is locked or fail secure when powered, it is unlocked. 12VDC - 280mA 24VDC - 140mA. Includes manuals for installation and data sheets.. Comes with Standard USA Size for the electric strike.

HES 9400 Electric Strike slim line surface mounted solution. Works with rim exit devices up to 12 throw latchbolt.. All components are completely encased within its 12 thick stainless steel housing, so no cutting on the frame is required for installation.. An 18 spacer plate is provided to accommodate varying door gaps.. SecuriCare five-year, no fault, no questions asked warranty.. ELECTRICAL DC Continuous Duty, Dual voltage 1224 VDC..

Field-selectable for fail-safe or fail-secure operation. This strikes feature an ultra-compact design and adjustable stainless steel keepers with over 2,200lbs 1000kg of holding force in fail secure mode. The strikes release electrically with up to 25 lbs of door preload. Single solenoid operates on 12VDC power. Provides electrical remote control, allowing door to open without actuation of the exit device.. Suitable for fire exit door with Push-rod lock.The operating principle of electric strike is that electromagnetism produces the force to pull or push the release lever so that to lock or open the door. This electric Strike is designed for rim exit devices with 34 19.1 mm Pullman latchbolts. For Indoor Use Only.. Push panic bar need buy seperately, please refer to ASIN B06XWY91HQ.

Completely Surface Mounted. Grade 1. Tamper Resistant. Static Strength 1,500 lbs. Dynamic Strength 70 ft-lbs. Endurance 1,000,000 Cycles. Horizontal Adjustment. Dual Voltage 12 or 24 VDC.

Failure secure Keep Locked if power outage.. Testing to 1000000 cycles. Note Work with knob lock,knob lock should buy seperate. Work with mechanical lock,mechanical lock should buy seperate.. Holding Force 1000kg 2200lbs. Designed for Metal Frame drill a hole,then install it directly.. Material Stainless Steel .Voltage DC12V..

This lock offers fail-secure operation, so when power is lost, the strike locks the door. The No-Cut Electric Door Strike Fail-Secure is used to convert a cylindrical lockset into an electronic access-controlled locking system. This no-cut model is specially designed to fit most metal or wooden doors with only minimal cutting required of the door frame beyond the hole for the strike. Provides 1,000-pound holding forcestatic strength. It's a solenoid with one function, can be wired any way. Uses 2-contacts, non-polarized connection to access control or egress device. This lock will polarized when the diode added..

The main feature of this kit is that it allows you to open the door simply by pressing the wireless RF remote instead of moving to the door physically when someone visits. The remote communicates with the receiver, which can program up to 40 remotes, and it has a range of 164 feet.. An exit button is included in this magnetic lock system kit, and you could exit from indoors easily by pushing it once.. The remote communicates with the receiver to let people in. 0510 seconds locking delay time adjustable, default is 5 seconds. The default function of the remote is momentary that when the power is on, the lock is locked and when you press the button on transmitter the lock will unlocked temporarily to open the door. The other function is toggle that the remote has is the ONOFF feature..