Top 10 Best Ender 3 Flexible Build Plate

ATTENTION BEFORE USEFirstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.. ALL NEW FUNCTIONALITY Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.. EASY MODEL REMOVAL The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.. CUSTOMIZABLE The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.. SIMPLE INSTALLATION UNIVERSAL Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds..

Super Convenient This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.. Excellent Performance This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.. Easy to Install Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.. Universal With 235mm x 235mm size, this 3d printer kit is suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials PLA, ABS, TPU, nylon etc.. Note If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints. Please feel free to contact us if you have any problem, we will try our best to help you..

Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Suitable for Creality Ender 3 Ender 3XEnder 3 ProEnder 3 V2Ender 3 V2 NeoEnder-3 S1Ender-3 S1 ProEnder 5Ender 5 Pro,CR20pro etc.. The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape. No more tape, no more glue, no more shovel, and release your printing anxiety. Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.. When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print..

Quality AssuranceMade of high-quality spring steel, the flexible Steel spring Sheet won't kink or warp when flexing. The design of the positioning hole makes the PEI Sheet installation more convenient.. Wide ApplicationCompatible with PLA PETG PEEK ABS and any other filaments. 235235mm spring steel sheet 3d printer bed works well with Ender 3Ender 3 v2 Ender 3 Pro Ender 5 Ender 5 Pro. To be compatible with Ender-3 S1Ender-3 S1 ProEnder-5 S1, please remove the two positioning screws on the hotbed first.. Great AdhesionPrint molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety.. Easy Take MoldEasy to remove the prints just take out the build plate surface and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints. After Sales SupportWe provide professional after-sales service. Please kindly contact usseller via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question..

Easy to Remove the Print The preferred choice for 3D printer heated beds, just print on the magnetic construction board, remove the upper magnetic surface, carefully bend it, and watch the model fall into your hands. VS. tempered glass, it adheres better and is easier to fix, no more worrying about being broken. VS. carbon-silicon glass, it is more affordable and easier to remove the model.. Excellent Performance The magnetic bed is highly flexible and heat resistant, up to 70C without demagnetization. The heating speed is fast and uniform, ensuring that the bottom of the finished model is delicate and not warped. It is durable, easy to clean with alcohol and can be used repeatedly.. Easy to Install The build surface consists of an upper magnetic build surface and a lower magnetic adhesive base. Place the lower 3M adhesive surface on top of the 3D Printer build plate then you can start to print your models.. Customizable This magnetic bed replacement can be easily cut to any size. Compatible with most FDM printer models, such as Ender 3Ender 3 ProEnder 3 V2Ender 3 V2 NeoEnder 3 NeoEnder 3 S1Ender 5Ender 5 ProCR 20CR 20 Pro and other 3D printers which have a build plate smaller than 235235mm9.259.25in. Suitable materials PLA. Note Before installation, please make sure the bottom of the soft magnetic adhesive is firmly attached to the upper layer, if it cannot be attached, please rotate 90 degrees and try again until it is fully attached.Please don't use acetone to wipe the thin layer left by the models..

Note This product is not for use with high-temperature printing applications above 60C..The innovative platform included two plates, the top plate is spring steel plate with PC surface, the bottom plate is magnetic plate with sticker.. The PC Spring steel plate with flexibility and tenacity in the middle makes it easier to take out the prints, flex slightly to pop your print right off.. the PC texture surface with good adhesion, the model can be firmly attached to the surface of the print platform. . The spring steel can be flexed and bended thousands of times without deformation. . Size310x315mm,fit for CR-1010S ProCR-10 SmartCR-10 Smart ProMP Maker Pro Long LK1 PRO LK5 PROEnder 3 MaxEnder 3 S1 Plus .

Recommended hot bed temperature when using PLAPLA 45 Celsius to 55 Celsius the larger the printing model, the higher the temperature of the hot bed. Recommended hot bed temperature when using PETGPETG 60 Celsius to 80 Celsius the larger the printed model, the higher the hot bed temperature. Strong AdhesionAfter the hot bed is heated, the model is stable on the hot bed,and not easy to loose and fall off.. Easy to Use and FlexibleHas certain flexibility and can be bent. After cooling, the model is loose and easy to take.. Good compatibilityCan print a variety of consumables, such as PLA, PETG, TPU, ABS, etc..

Magnetic RemovableThe innovative platform included two plates, the top plate is spring steel plate with PC surface, the bottom plate is magnetic plate with sticker.The top plate very east to attach or remove from the magnetic bottom plate.. Easy to Remove Printed ModelsThe printed models can easily be removed by bending the spring steel sheet.. Good Ahesionthe PC texture surface with good adhesion, the model can be firmly attached to the surface of the print platform.. DurableThe spring steel can be flexed and bended thousands of times without deformation.. Wide Compatibilitythe size is 235235mm9.259.25inch,suitable for Ender 3, Ender 3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender3 S1, Ender3 S1 Pro, Ender 5, Ender-5 Pro,CP-01, CR-20, CR20 Pro and similar sized bed,Artillery Genius,Voxelab Aquila,Geeetech A10 series,BIQU-B1 etc..

Quality assurance100 Official Creality 3D printer PEI Sheet double sided removable magnetic flexible heated bed platform. Smooth one side with coated PEl and Textured the other side with textured sticker. The spring steel plate can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.. Double SidedOne side is a smooth PEI surface, which used for the flat model, great adhesion and easy to remove printings. And the textured side has excellent adhesion and easy printing without any warping. You can get two different printing experiences with one plate.. Easy to removeWith a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints. Wide ApplicationThe double sided PEI sheet can compatible with PLA PETG PEEK ABS and any other filaments. 235235mm PEI sheet 3d printer bed perfect printing size works well with Ender 3Ender 3 v2 Ender 3 Pro Ender 5 Ender 5 Pro. To be compatible with Ender-3 S1Ender-3 S1 ProEnder-5 S1, please remove the two positioning screws on the hotbed first.. After Sales SupportWe provide professional after-sales service. Please kindly contact usseller via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question..

Excellent Performance This magnetic bed has strong flexibility and heat resistance up to 70 without degauss. Wear-resistant, scratch-resistant, stain-resistant, hand-sweat resistant, can be used repeatedly.. Easy to Use This magnetic sheet has great adhesion, prints can be sticked on the surface firmly. After printing, take off the upper magnetic build plate from the lower one, bend the flexible plate carefully, the prints can be removed easily.. Easy to Install Magnetic bed comes with upper matte magnetic build plate and lower magnetic adhesive build plate. Post the lower adhesive plate on printing platform, make the upper magnetic one match well with it, then you can start print.. Customizable 235mm x 235mm size, The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models. Applicable materials PLA, ABS, TPU, nylon etc.. Note If the two parts of the magnetic bed fail to adsorb, please rotate it 90 degrees and try again. Do NOT use acetone to wipe off thin layers left from prints..