Top 10 Best Ezpass Tag Ny Holder

Strong adhesive.

These are the same mounting strips that came with your toll pass Fastener with Alcohol Prep Pad Included in this kit is 4 dual lock adhesive strips 0.5 x 2.0.. Great For Your Toll Tag ez pass mounting strips Pre-Cut strips designed specifically for use with your Toll Pass, EZ Pass, SunPass or FastPass and cover for ez pass holder.. Easy Installation ezpass mounting strips that are easy peel and stick application that has a high quality of material and durability. EZ pass strips with adhesive water-resistant and work well on metals, glass, and plastics.. Superior Quality Mounting tape with industrial strength peel and stick adhesive strips for indoor or outdoor use. Strong interlocking mushroom-shaped heads that connect with an audible snap.. High performance clear acrylic adhesive. Won't shake, rattle, buzz, block signals, or fall off like suction cup holders, IndoorOutdoor use. These have a high temperature performance rating that will withstand up to 200 degrees..

For use with both the new smaller and the original transponder. The Best Way to attach your EZ Pass Toll Tag to the windshield of your Car, Truck, RV, or Motorcycle. No adhesive velcro necessary. Easy On Eazy Off Slip the Tag into the E-Z Mount and stick it to the windshield with the suction cups. Its large suction cups securely hold the tag in place...without using permanent adhesive strips. E-Z Mount easily removes for cleaning the windshield, switching to another vehicle or when you just don't need it. Suitable for the following States NJ NY PA DE IL IN OH VA WV MD MA RI NH SC FL and I-Pass C-Pass Palmetto Pass. For use with both the new smaller Kapsch Model 801660A-TAB and the original Mark IV transponder See back of unit Please check compatibility. Not for use with EZ Pass Flex, FasTrak..

QUALITY - - Made out of premium ABS plastic materials making it a long-life product to serve you for all your EZ Pass holder needs for years to come. The suction cups that come with is are made of high-grade rubber and will stick to your windshield without any issues.. DESIGN - - Our EZ Pass Holders were designed so that you can transfer your EZ pass from vehicle to vehicle without leaving any Velcro residue everywhere. Especially ideal to use for rental cars and easily removable to prevent theft. It also comes along with three suction cups that mount nicely to your windshield and will stay there unless its physically removed.. FIT - - The EZ Pass holder diemsnions is 3.75in wide x 2in tall x 1.25in deep. The top gets snugger and reaches a total of 0.5in deep as it was designed to fit the NEW SIZE EZPasses that are available in the following states New York, Delaware, New Hampshire, Maryland, Ohio, Virginia, Rhode Island, New Jersey, Pennsylvania, Maine, Massachusetts, Illinois, West Virginia and any other state with a similar size EZPass transponder.. PACKAGE CONTENTS - - 1 Clear EZ Pass Holder and 3 suction cups. Manufactured for Neust Automotive accessories.. 100 MONEY-BACK GUARANTEE - - Our EZ Pass holders are backed by 100 Customer Satisfaction Guarantee Policy. This policy was put in place to ensure that you are fully satisfied with our product or receive your money back no questions asked, so go ahead and try our EZ Pass holders now, RISK FREE.

Easy to Use your EZ Pass Toll Tag on the windshield of your Car, Truck, RV, or Motorcycle. Holds Tightly to Your Car Windshield 3 large suction cups securely hold the tag in place, without using permanent adhesive strips. Removes Easily for cleaning the windshield, or when you are switching to another vehicle or when you just don't need it. Elegant Design easy to take out ther toll pass. To be used for the new size EZ pass. Suitable for the following States NJ NY PA DE IL IN OH VA WV MD MA RI NH SC FL and I-Pass C-Pass Palmetto Pass. Not for use with EZ Pass Flex, FasTrak..

Fits all new major toll pass holders - including New York, New Jersey, Massachusetts, Maine, Vermont, Pennsylvania, Delaware, Illinois, Maryland, South Carolina, Indiana and Virginia. Attach in just seconds - with suction cups which even come with release tabs so it is Super easy to remove. ATTACH IN JUST SECONDS - with suction cups which even come with RELEASE TABS so it is super easy to remove. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

eZpassClip is your mounting solution for the new-style transponder.. eZpassClip makes it easy to use your electronic toll tag in multiple vehicles or simply remove it to prevent theft.. eZpassClip mounts with two suction cups to your windshield. Simply slide up your electronic toll tag and you're done. eZpassClip is proudly made in the USA of high density, UV resilient plastic.. Your eZpassClip is ready to use. Remove any Velcro attached to your toll tag, dampen the suction cups if needed, and attach to a convenient location on your windshield. Slide your toll tag up from the bottom and you're ready to go. Available in either black or white..

1 EZ SKIN, our best-selling Silicone Skin for EZ Pass. 1 Plastic HOLDER with Strong Suction Cups. Genuine 3M Dual-Lock Interlocking Strips. The LATEST BUNDLE to make your EZ Pass more discreet INSIDE OUTSIDE your car, with the great look of our Premium Silicone and the performance of top-quality Suction Cups. Fits EZ Pass Mini iPass the most common model, measuring about 3.7 x 1.9 inches. Does NOT fit the older larger EZ Pass. Does NOT fit EZ Pass Flex with HOV switch. Does NOT fit the new rectangular EZ Pass model. Please check the photos and measurements to ensure compatibility with your EZ Pass model..

FITS ALL NEW TOLL TRANSPONDERS Our pass holder offers compatibility with a wide range of toll transponders including the old and new EZ Pass,I Pass, I Zoom, PalPass, FasTrak, Quick Pass, Elite Pass, PrePass, Fast Lane HOV Switch model.. EASY TO INSTALL AND REMOVE The Toll Pass Holder attaches to your windshield using dual suction cups making it easy to install, easy to remove and easy to switch between vehicles.. LONG LASTING Dual industrial grade suction cups allow you to firmly mount your toll transponder to your windshield without the sticky mess of a permanent adhesive.. FOUR STRIPS INCLUDED Won't shake, rattle, buzz, block signals, or fall of. Water, dirt, and UV resistant. High temperature performance will withstand up to 200 degrees.. COMPACT AND DURABLE DESIGN Compact design that hides behind the smallest tall tag and your toll pass including the holder can easily be hidden behind your rearview mirror..

3 Point Suction Cup Mount. Fits newsmaller EZ-Pass and I-Pass 3.5x2 with or without adhesive strips. You don't have to remove velcro from your unit. Can withstand high heat. Does not rattle.

QUALITY - - Made out of premium ABS plastic materials making it a long-life product to serve you for all your EZ Pass holder needs for years to come. The suction cups that come with is are made of high-grade rubber and will stick to your windshield without any issues.. DESIGN - - Our EZ Pass Holders were designed so that you can transfer your EZ pass from vehicle to vehicle without leaving any Velcro residue everywhere. Especially ideal to use for rental cars and easily removable to prevent theft. It also comes along with three suction cups that mount nicely to your windshield and will stay there unless its physically removed.. FIT - - The EZ Pass holder was made to fit the new size EZ Pass holders for the states of New York, Delaware, New Hampshire, Maryland, Ohio, Virginia, Rhode Island, New Jersey, Pennsylvania, Maine, Massachusetts, Illinois, West Virginia and any other state with a similar size EZ Pass transponder.. PACKAGE CONTENTS - - 1 Clear EZ Pass Holder and 3 suction cups. Manufactured for Neust Automotive accessories.. 100 MONEY-BACK GUARANTEE - - Our EZ Pass holders are backed by 100 Customer Satisfaction Guarantee Policy. This policy was put in place to ensure that you are fully satisfied with our product or receive your money back no questions asked, so go ahead and try our EZ Pass holders now, RISK FREE.

ALL NEW 2021 TOLL PASS HOLDER - Our new 2021 holders are now stronger than before The flexible base allows you to easily remove the holder from the windshield without breaking it. Plus, they are 100 UV Protective U.S Patented. FITS ALL MAJOR TOLL PASSES - Old and New EZ Pass, FasTrak, IPass, IZoom, Sun pass, Fast Lane with HOV switch, Quick Pass, Elite Pass, PrePass Including New York, New Jersey, Massachusetts, Maine, Vermont, Pennsylvania, Delaware, Illinois, Maryland, Ohio, South Carolina, Indiana and Virginia. ATTACH IN JUST SECONDS - with suction cups which even come with RELEASE TABS so it is super easy to remove from the windshield.. GREAT VALUE - 4pcs Reclosable EZ Pass Adhesive strip set are INCLUDED 6.00 Value.