Top 10 Best Fan For Wood Stove Powered By Heat

Energy Efficient No batteries or electricity required. It is driven by the heat generated by the fireplace or wood burning stove and conducts to the fan base to drive the blades.. OperatingTemperature176Fahrenheit80Celsius482Fahrenheit 250Celsius, higher the temperature, faster it starts to spin. Attention the temperature can not be over 350Celsius662Fahrenheit when using the stove fan.. Silent Operation You will hear virtually no sound at all. And it improves the circulation of hot air in the room for greater comfort.. Better Heat DistributionThis 4 blades wood burner fan is designed to deliver a very broad thermal current,so it disperse heat from the stove more efficiently and raise the temperature of your room quickly.. Easy to Use No assembly needed, just put the stove fan on the top of stove, the fan will spin with the temperature getting higher..

Heat powered - no batteries or electricity required.. Efficiently circulates warm air throughout the room.. Less consumption, more efficiency.. Innovative and durable design.. Silent operation.

Essential Fireplace Accessories Heat Powered Stove fan help you save fuel and spread warmth to you.. No Noise Efficiently circulates warm air throughout the room without noise.. Overheat Protection - Built-in bimetal strip on the bottom of the fireplace fan raises the edge of the fan slightly when approaching the maximum operating temperature to protect the motor and thermoelectric module.. Simple Operation Place the fireplace fan in the correct position, wait until the fireplace fan absorbs heat to reach the starting temperature of 60, then the fireplace fan can run normally, while taking care not to exceed the maximum operating temperature of 360.. Technical Support - Frequently asked questions can be found in the user guide, if you still have any problems during use, please contact us directly for solutions..

Upgrade 5 Blades Stove fanUpgrade Technology, Reinforced 5 Blades, Faster Speed, Larger Air Volume. The heat-powered stove fan is designed to circulate the warm air created by a woodcoal or pellet-burning. Efficiently circulates warm air throughout the room. Heated Self-PoweredThermoelectric module acts as a small generator to power the fan's motor. No batteries or power required Improved warm air circulation results in greater comfort and reduces wood consumption from your stove.. Quiet Operation This stove fan's noise level is less than 25 dB, which gives you a Quiet atmosphere. The stove fan is designed to be used with coal, pellet, or wood-burning stoves. Safety and Long LifeStove operating with normal surface temperatures between 212F100C and 662F350C. Built-in overheating protection, when the temperature exceeds 662F350C, the metal strip at the bottom will expand and lift the fan to protect the motor. Quality WarrantyIf any issues, please reach out to us via amazon or service Mail. The Package comes with a stove fan and a free Stove accessory -thermometer. please put fan on the side of the chimney, leave a space of 15cm behind the fan so that the fan can blow hot air into the room.

2021 Upgrade 6-Blade Stove FanOur OCHOR stove fan composed of 6 blades,can produce more warm air and improve the efficiency of the product. It is widely used in wood stove, gas stove, Log Burner, Fireplace etc. With thermometer can detect the working temperature at any time to ensure the safety of the furnace.. No electricity The stove fan no need electricity or battery,powered by heat. Healthy and economical,Wood Stove Fan for Log Burning Fireplaces,gets power from the heat produced by your fireplace, wood-burning stove or pellet stove. Effectively dispersing warm air around your room.. Whisper QuietNewly designed blade, larger air volume, lower noise. The moving part is the blades assembly, so the working noise is below 32DB. It will not interrupt your reading, work and other activitiesyou can enjoy the warm air in a quiet and comfortable environment.. Start automaticallyStart work when the surface temperature under the fan reaches around 50122,working with a temperature between 50122 centigrade degree to 350662 centigrade degree. The higher temperature of the stove, the faster the blades spin. Slow down and stop as the stove cools.. More efficiencyFully utilize the heat from your wood stove and disperse it to your room. The 6-Blades fan circulates warm air at a rate of 290 CFMcubic feet per minute, and uses 30 less wood. You can enjoy warmth in you room,increasing your comfort.. Safety designOur fan has an overheat protection deviceThe fan comes with a bimetallic safety device in the base of the fan.When the surface temperature rises above around 250, it will gently lift the front of the fan to protect the TEG and motor. The fan will automatically recover normally as the surface temperature decreases.. Eco-friendlyHeat Powered, the stove fan generates its own energy by the heat from the stove surface, no batteries or electricity required, and can efficiently circulate warm air throughout the room.. Unique blade designWorking quietly,more air flow.Feature with the unique blades design,The stove fan can drive more warm air with silent work.No noise You will enjoy the warm air in a quiet and comfortable environment.. Easy Operation No assembly needed, just put on the top of the stove, the fan will spin with the temperature getting higher.. Friendly ServiceWe provide a 30-day refund service and after-sales protection of up to 6 months. If you have any questions, please contact us..

Compact Size--8.7 x 6.7 x 3.6 inches, the material of the stove fan is aluminum.. No Batteries or Electricity required--The wood burner fan uses heat from the stove surface to spin, adjusting its speed automatically with the stove surface temperature.. Longer lifetime--There is a Bi-metallic safety device at the base of the stove fan. If the surface temperature rises around 300, the safety device gently elevates the front of the fan to protect the TEG and motor.. Whisper-quiet--The only moving part of this heat powered fan is the blade assembled. You don't even know the stove fan is there, but you will FEEL the WARMTH. Less Consumption, More Efficiency--The stove fan will help reduce the fuel consumption and make the room warmer quickly..

Start AutomaticallyUpgrade Technology,Reinforced 4 Blades,Faster Speed,Larger Air Volume.The heat powered stove fan is designed to circulate the warm air created by a wood coal or pellet burning.Efficiently circulates warm air throughout the room.. Eco-Friendly and Self-PoweredThermoelectric module acts as a small generator to power the fan's motor. No batteries or electricity required Improved warm air circulation results in greater comfort and reduce wood consumption from your stove.Stove operating with normal surface temperatures between 122F50C and 644F340C.Energy Class A. Whisper QuietNewly Designed Blade,Larger Air Volume,Lower noise.You don't even know the stove fan is there,but you feel the warmthYou will enjoy the warm air in a quiet and comfortable environment.. Safty DesignThe stove fan support is made with Anodized Aluminum, able to resist high temperature up to 662F350C, no deformation and no discoloration even after long time working under high temperature.. Longer LifetimeThere is a Bi-metallic safety device in the base of the fan.If the surface temperature rises above around 400F 200C,the safety device gently elevates the front of the fan to protect the TEG and motor..

Eco-friendly - The wood stove fan will help reduce the fuel consumption and make the room warmer quickly.Spread heat around room and increase temperature, improve warm air circulation results in greater comfort and reduce wood consumption from your stove.. No Power Required - Fireplace fans powered by heat.The wood pellet fan converts heat into electricity by means of a heat-conducting plate at the bottom to achieve rotation.No fire hazards. And the fireplace fan automatically adjusts its rotation speed with the temperature of the surface of the stove.. Very Silent - The only moving part is the blade assembly.The noise of the silent heat powered wood stove fan is less than 25db, you don't even know where the fan is, but you still feel warm.You can enjoy the warm air in a quiet and comfortable environment.Please do not touch it directly with your hands when running work.. Upgraded 4-Blade - Heat powered stove fans are widely used in wood-burning stoves, gas stoves, pellet stoves, etc. The recommended surface temperature is between 122F-644F 50C-340C.No assembly is required, just place the fireplace fan on top of the furnace and the heat fan will spin as the temperature rises.. NOTE - This unique stove fan is designed to be placed on your wood stove to make efficient air circulate indoors quickly and efficiently.Starts when the surface temperature at the top of the fireplace reaches about 50C 122FIt does not provide strong wind power like ordinary fans.If the max temperature on your stove top is even below 100C 212F, DO NOT buy, the fan will can't works efficiently..

Upgraded Fireplace Fan- The new fireplace fan has two thermal conductive sheets, which can quickly transfer heat to the motor, which can generate more warm air and improve the efficiency of the product.. No Operating Cost- The Fan uses the heat on the surface of the furnace to rotate. When the temperature reaches 50 122 , the fan rotates automatically. It can automatically adjust the speed according to the temperature, up to 350cbm h.. Low Noise- Newly designed blades, greater air volume and lower noise. The movable part is the blade assembly, and the working noise is below 32dB. You can enjoy the warm air in a quiet and comfortable environment.. Safety Design- Our fan has an overheat protection deviceThe fan comes with a bimetallic safety device in the base of the fan.When the surface temperature rises above around 250, it will gently lift the front of the fan to protect the TEG and motor.. Lifetime Technical Support- The frequently asked questions can be found on the USER GUIDE, if still any questions or complaints during uses, just contact us directly for solutions..

New Upgrade 5-Blade Stove FanOur 5 blades wood stove fan is designed to circulate the warm air created by a wood,coal or pellet-burning. It is widely used in wood stove, gas stove, Log Burner, Fireplace etc.. Upgrade Quality Materials The wood stove fan base and blade are made from rust-proof anodized aluminum, wear-resisting, with good thermal conductivity. Be able to no deformation and no discoloration even after a long time working under high temperature.. Non ElectricEcoThe wood stove fan uses heat from the stove surface to spin,adjust its speed automatically with the stove surface temperature,no batteries or electricity required, reduce the fuel consumption and make the room warmer quickly.. Ultra Quiet OperationNewly designed blade, larger air volume, lower noise. This wood stove fan's noise level is less than 25 dB.You will hear virtually no sound at all ,Satisfy you to enjoy warmth and comfort in a quiet environment.. Safety designThe fireplace fan comes with a bimetallic safety device in the base of the fan.When the surface temperature rises above around 482F250, it will gently lift the front of the fan to protect the TEG and motor. The fan will automatically recover normally as the surface temperature decreases..