Top 10 Best Fiber Splicer

Key Technical Facts Matter 1 4 high precision motors 2 7s fast splicing, 18s highly efficient heating 3 0.02dB ultra-low splicing loss 4 5mm fusion for ultra-short cleave length 5 320 times image magnification 6 300 groups of splice modes, 100 groups of heating modes, 10000 groups of fusion records storage. Easy to Operate, Wide Compatibility 1 4.3-inch touch screen with graphical interfaces for smooth operation 2 All-in-one fixture meets fusion demands of multiple optical fibers, jumpers and rubber-insulated wires 3 Capable of dual-directional fusion 4 Multiple fusion modes and heating modes are available. Other Features 1 High Precision Ceramic V-groove and ceramic presser foot, ensure fiber loading becomes more convenient and accurate, also easy for clean and maintenance 2 Intelligent Heat Shrink, the heater wont work until the fiber is detected by the embedded sensor to avoid scalding. Pluggable large-capacity lithium-ion battery 6800mAh built-in battery satisfies 220 times of splicing and heating, good for longer field work. Compact Design, small and light -- 120mm W130mm H154mm D, min. 1.7kg without battery. This Fusion Splicer is water-resistant, dust-resistant, shock-resistant, high-temp-resistant. The light-weighted carry case can be used as working bench. Rich accessories such as spare electrodes, miller stripper, are also included in this toolbox.

3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cableSplice Loss0.025dBSM0.01dBMM0.04dBDSNZDSFiber diameterCladding Diameter80-150mCoating Diameter100-1000mFiber Cleave LengthCoating less than 250m8-16mmCoating less than 250-1000m16mm.. With 5-inch 800X480 high-resolution screen, is up to 300 times focus magnificationsSix motors Core alignment,fusion splicer core to core 6 motors 6 seconds splicing.. languages English FrenchSpanishPortuguesePolish ArabicRussian, etc.. Through the phone app,splicing is easy to operate.You can learn various operration in the APP,as well as update the mobile app and connect to the machine to synchronizes update.The mobile phone is not needed when splicing.The mobile APP can be used to turn onoff the machine menu,ARC calibration ,remote control,smart lock,etc.. Lifetime Friendly Customer Service,if have problem,pls contact us using the amazon message box,we will solve your problem in time and must give you a satisfactory solution .At the same time,you also need a little patience..

3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cableSplice Loss0.025dBSM0.01dBMM0.04dBDSNZDSFiber diameterCladding Diameter80-150mCoating Diameter100-1000mFiber Cleave LengthCoating less than 250m8-16mmCoating less than 250-1000m16mm.. Built-In power meter Wavelength 850nm1300nm1310nm1490nm1550nm1625nm Built-in Visual Fault LocatorPower15mw,2hz flashing And Constantly Bright Mode.. With 5-inch 800X480 high-resolution screen, is up to 300 times focus magnifications5s fast splicing 15s fast heating.Once splicing reaches to 50,000 times free replacement a new machine. Through the phone app,splicing is easy to operate,calibrate and Other settings are performed on the mobile APP10 Languages to switch freely English,french,Russion,Italian,Portuguese,Polish,Spanish,Thai,Arabic,. Friendly Customer Service,if have problem,pls contact us using the amazon message box,we will solve your problem in time and must give you a satisfactory solution .At the same time,you also need a little patience. Unlike some buyers who have no patience,not waiting for the problem to be solved, will make some untrue comments..

Splicing Mode Manual, Half Auto, Auto Typical Splicing time7sSM G652 Quick Mode Typical heating time18sec. Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651653, ITU-TG.655 and ITU-TG.657.Average Splicing LossSMF0.02, MMF0.01dB, DSF0.04dB,NZDSF0.04dB. Precise fiber Cladding alignment, ultra-low fiber fusion splicing consumption 7s fast fusion splicing.320 times image magnification.300 groups of fusion splicing modes.Dual-direction splicing, automatic splicing, intelligent pyrocondensation. Small in Shape, Light in Weight 1.95kg with battery, suitable for field work.6800mah Li-ion Battery,220 cycles splicing and heating, 3 hours charging time splicing and charging at same time,Cycling charge 300-500 times, easy to replace battery. Lifetime Friendly Customer Service,if have problem,pls contact us using the amazon message box,we will solve your problem in time and must give you a satisfactory solution .At the same time,you also needs a little patience..

With 5-inch 800X480 high-resolution screen, is up to 300 times focus magnifications, making it easy to observe the fiber with naked eyes5s fast splicing 15s fast heating,the working efficiency increased by 50 compared to ordinary splicing machines.. 3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cableSplice Loss0.025dBSM0.01dBMM0.04dBDSNZDSFiber diameterCladding Diameter80-150mCoating Diameter100-1000mFiber Cleave LengthCoating less than 250m8-16mmCoating less than 250-1000m16mm.. Built-In power meter Wavelength 850nm1300nm1310nm1490nm1550nm1625nm Built-in Visual Fault LocatorPower15mw,2hz flashing And Constantly Bright Mode.. Configure it on the phone app,splicing is easy to operate.10 Languages to switch freely English,french,Russion,Italian,Portuguese,Polish,Spanish,Thai,Arabic. splicing record storage, synchronize to the phone, the server to cloud storage unlimited.. It is especially suitable for optical fiber and cable projects, maintenance scientific research, railway, petrochemical, electric power, military and public security and other communications fields..

8s Splicing 15s Heating Ai-8 uses the latest core alignment technology with auto-focus and six motors. It is more precise and less dissolution loss than cladding alignment technology. With high-speed image processing technology, it can complete the whole process of fiber fusion splicing automatically in just 6 seconds 15 seconds heating.. 3 in1 Fiber Holder SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable. Applicable FibersSMG.652G.657MMG.651DSG.657 NZDSG.655. Splice Loss 0.025dB SM, 0.01dBMM 0.04dB DSNZDS. 5'' TFT Display It adopts 5-inch 800X480 high-resolution screen, and the operation graphics are simple and intuitive which ups to 300 times focus amplification, which improve the visibility and clarity of your operation. 7800mAh Lithium Battery 7800 MA high-capacity lithium battery, charging time 3.5 hours, continuous splicing and heating about 200 times.. Used Broadly It is especially suitable for medium and short distance trunk construction, FTTH project, security monitoring and other fiber cable splice projects, as well as optical fiber and cable projects, maintenance scientific research, railway, petrochemical, electric power, military and public security and other communications fields..

3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cableSplice Loss0.025dBSM0.01dBMM0.04dBDSNZDSFiber diameterCladding Diameter80-150mCoating Diameter100-1000mFiber Cleave LengthCoating less than 250m8-16mmCoating less than 250-1000m16mm.. With 5-inch 800X480 high-resolution screen, is up to 300 times focus magnificationsSix motors Core alignment,fusion splicer core to core 6 motors 8S splicing,18S heating time. Through the phone app,splicing is easy to operate.. 10 Languages to switch freely English,french,Russion,Italian,Portuguese,Polish,Spanish,Thai,Arabi. Lifetime Friendly Customer Service,if have problem,pls contact us using the amazon message box,we will solve your problem in time and must give you a satisfactory solution .At the same time,you also need a little patience..

3 IN 1 FIBER HOLDER- SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable. Applicable FibersSMG.652G.657MMG.651DSG.657NZDSG.655. Splice Loss 0.025dB SM, 0.01dBMM 0.04dB DSNZDS. Coating Diameter100-1000m, Cladding Diameter80-150m.. 5 TFT DISPLAY- It adopts 5-inch 800X480 high-resolution screen, and the operation graphics are simple and intuitive which ups to 300 times focus amplification. Once splicing times reach from 48000-60000 times, free to change a new machine. BUILT-IN POWER METER VFL- Using the latest core alignment technology with auto-focus and six motors. It is more precise and less splicing loss than cladding alignment technology. Effectively measure connection loss,verify continuity and help assess fiber link transmission quality.. 7800MAH LITHIUM BATTERY- 7800 mAh high-capacity lithium battery, charging time 3.5 hours,continuous splicing and heating about 200 times.. USED BROADLY- This Intelligent and convenient machine can be connected to mobile app, and supports ten languages English, French, Russia, Italian, Portuguese, polish, Spanish, Thai, Arabic. It is especially suitable for optical fiber and cable projects, maintenance scientific research, railway, petrochemical, electric power, military and public security and other communications fields..

Efficient And Portable 5200 mA high-capacity lithium battery, charging time 3 hours, continuous splicing and heating about 200 times. fusion splicer machine completes the whole process of fiber fusion splicing automatically in just 9s 30s heating. Lightweight and easy to carry.. 3 In 1 Fiber Holder SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable. Applicable Fibers SM0.02db MM0.01db DS0.04db NZDS0.04db. Effectively measure connection loss, verify continuity and help assess fiber link transmission quality.. 5 Inch TFT Display Fiber splicer machine adopts 5-inch digital high-definition TFT color LCD display, clear and intuitive. The XY axis XY axis or a separate display shows at the same time, 300200 times magnification.. Humanization Tool Kit The fiber fusion splicer offers plentiful accessories, including fiber stripper, AC adapter, lithium battery, spare electrode, charger, cooling tray, operation manual CD, carrying case. Tool box protects the fiber splicing tools.. Various Application The fusion machine is especially compatible with optical fiber and cable projects, maintenance scientific research, railway, petrochemical, electric power, military and public security and other communications fields..

Faster Splicing Heating The fusion splicing machine uses a powerful high-speed motor that allows fast 8 second splice time and 30 second heat time, continuous splice and heats about 200 times. And it saving engineers time. The fiber fusion splicer provides great accessories, including fiber stripper, AC adapter, lithium battery, spare electrode, charger, cooling tray, operation manual CD, carrying case. Toolbox protects the fiber splicing tools.. 3-in-1 Fiber Holder 3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable Splice Loss SM0.02db MM0.01db DS0.04db NZDS0.04db. Effectively measure connection loss, verify continuity and help assess fiber link transmission quality.. Automatic Heating V-shaped high-power automatic heater, 20s rapid heating, 180-degree three-dimensional heating. The fiber splicer machine features a high-strength body, drop-proof and wear-resistant. Equipped with a portable carrying case, the fiber fusion splicer is convenient to take to any working area.. Fiber Power Meter Mainly used for continuous optical signal power measurement and fiber optic line continuity test. It adopts a microprocessor for control, high precision, and low error it also has a wavelength memory function, remembering the test wavelength set before the shutdown. Six test wavelengths 850, 1310, 1490, 1550, 1625nm, are compatible with various test environments. We also present a high-precision fiber cleaver with high efficiency.. Clear Lcd Long Time Standby With 5-inch high-resolution screen, it is up to 300 times the focus magnifications when XY Axis displayed separately, 300 times focused magnifications when XY Axis Displayed Simultaneously. 5200 mah high-capacity lithium battery, charging time 3 hours, continuous splicing and heating about 200 times. The fusion machine is especially suitable for optical fiber and cable projects, maintenance scientific research, electric power, and other communications..