Top 10 Best Fitness Reality Squat Rack Power Cage

FIT MOST 2-INCH X 2-INCH POWER RACKS BUT NOT ALL PLEASE CHECK YOUR RACK DIMENSIONS BEFORE PURCHASING TO AVOID ANY UNWANTED RETURN Yes4All 2x2 Power Rack J-Hooks are designed to be compatible with 2-in x 2-in power racks with 1-in hole. 6MM THICK STEEL CONSTRUCTION Constructed of 6mm thick steel plate and covered with black paint coating finish, our Power Rack J-Hook stands for years without corrosion or breaking apart. HEAVY CAPACITY LOAD Due to the strong construction, each J-Hook can withstand 500lbs, for the total weight capacity of the two Hooks up to 1000 lbs. Now you can perform countless exercises, like Bench Pressing, Overhead Press. 8MM THICK PLASTIC PAD INCLUDED The J-Hook is fully equipped with a thick padded plastic layer to reduce noise during your workout session and protect your barbell from damage.. EASY HEIGHT ADJUSTMENT Yes4All J-Hook comes with 1-inch bar to lock on and off the rack for height adjustment in a breeze, while the shortened design is easy for you to rack or unrack the bar.

Fit 2-inch x 2-inch power racks Yes4All spotter arms are compatible with 2-inch x 2-inch power racks with 1-inch or 58-inch holes BUT NOT ALL PLEASE CHECK YOUR RACK DIMENSIONS BEFORE PURCHASING TO AVOID ANY UNWANTED RETURN. Heavy-duty Built strong enough to withstand up to 1000 pounds, these safety spotter arms can safely hold heavy loads.. Premium quality Yes4All safety catches are made of heavy-duty square steel. This tough design will prevent the spotter arms from corrosion and breaking apart and concurrently offer the needed security and grip when you work out with the power rack.. Full adjustability Easily adjust these spotter arms 2x2 to the desired height for your effective exercise training. Just twist, pull, and insert them into your preferred height.. Protective UHMW plastic pad These safety spotter arms are reinforced with the UHMW plastic pad to reduce noise and keep your barbell free from damage..

STRONG ASTM TESTED 800 LBS. WEIGHT CAPACITY- Don't put your safety in the hands of a squat rack that hasn't been tested. Our Squat Rack was ASTM tested at 2,000 pounds in order to get an official weight capacity of 800 pounds.. SOLID STEEL LONG SAFETY ARMS- Other companies provide hollow tubes, not us. Have peace of mind knowing that our safety arms are solid steel rods, designed to handle heavy weight.. MULTI-GRIP REVERSIBLE PULLUP BARS-Wide grip, narrow grip, hammer grip pullups are all available with this power cage. Can be reversed to lower the height of the cage. This is important if you have a lower ceiling.. STANDARD SIZED 1 HOLES- Makes your squat rack compatible with standard sized attachments such as J hooks, Dip bars, Weight storage bars etc.... TWIN SUPPORT BRACES-Makes this power cage strong and sturdy. Lower brace also acts as a feet support when using the Low Row Cable attachment. MAX WORKOUT SPACE- Our ELEVATED and curved support brace means more workout space and nothing to trip over. Get an extra foot of space for your bench.. TOTAL HOME GYM EQUIPMENT-Combine with our weight benches or full suite of attachments to build out a total home gym solution. CUSTOMIZE WITH ATTACHMENTS- Get J hooks, dip bars, landmine, weight plate storage attachments and others..

HEAVY DUTY FRAME- with an 800 LBS. Barbell Weight Capacity lets you workout with peace of mind. 2x2 Square Steel Frame with 1 inch holes allow you to add on standard sized attachments. Frame Compatible with barbells that have a 46 inch collar to collar grip width.. INCLUDED LANDMINE ATTACHMENT- Adds so much variety to your workouts that you'll never be bored. Compatible with Standard or Olympic barbells and can be placed on different parts of the frame. DON'T PAY EXTRA for something that is essential.. ADJUSTABLE HEIGHT PULLUP BAR-Absolutely necessary if you have a lower ceiling or just prefer a shorter jump up.. EXTRA BENCH PRESS SPACE-More space than other cages due to our rear support bar being elevated from the ground. That allows maximum space for your bench to slide back. You'll be glad with every rep that you chose a rack with more space.. EXTRA LONG 19.5 INCH SAFETY ARMS- Give yourself more room when doing squats. Up to 2X Longer than other cages. When your legs are burning and you gotta rack that weight, you'll be glad you chose this one.. INCLUDED- Weight Storage Posts, Landmine Attachment, Squat Rack with 2 J-Hooks, 2 Long Safety Hooks, Tools, Manual. What's NOT Included- Barbell, Weights, Resistance Band. FITS MOST ATTACHMENTS- With a STANDARD hole diameter of 1 inch, this half rack squat stand will be compatible with the majority of attachments out there. Don't choose a non-standard rack and be stuck with limited options.. HOME GYM ESSENTIAL- This power rack is essential home gym equipment for anyone who is looking to do multifunctional barbell exercises in a safe environment..

1500 lbs of real weight capacity with 2 x 3 tubular steel frame construction. Limited Lifetime Warranty. Two adjustable 2x 20 high Density rubber grip dip handles with user weight capacity of 600 lbs. Two 11.5 safety bars and two 35.5 dual mounted safety bars with each set combined weight capacity of 1500 lbs. Compatible with 7' Olympic bars. Safety bars for racking weight bars with no wobbling. 2 height position adjustable multi-grip chin uppull up bars with a weight capacity of 600 lbs. Included Olympic lat pull down and low row cable attachment for strengthening the upper back, shoulders and arms.

HEAVY DUTY FRAME 800 lbs. weight capacity with heavy duty frame construction. Large walk in space providing easy side to side movement. 2 x 2 square steel frame construction. Multi-position over head chin uppull up grip bars. CHROME SAFETY BARS Two 3 long chrome lock-on safety bars. Two 23 long chrome dual mounted safety bars. 19 adjustable height levels for the safety bars. Safety bars are compatible with 7 Olympic bars. 2 Rear stability bars. BALL BEARING PULLEY SYSTEMS Includes high lat and low row pulley systems with high tensile strength nylon coated cable. Easy glide 2 x 2 chrome guide rail for smooth operation. Includes one 39 lat bar and one 20 low row bar attachments. ADJUSTABLE LEG HOLD-DOWN Leg Hold-down can shift along the long safety bars for your comfortable secure position. The height can be adjusted by shifting the long safety bars up or down along the cage height. Two adjustable foam rollers included. Multi-position over head chin uppull up grip bars. EXTRA SPACE Extended lower rear cross bar provides extra space for fitting in benches and footrest for seated row exercises. 6. 5 Long x 1 diameter weight plate storage post with 270 lbs. weight capacity. Two 1-inch Spring Clip Collars included. COMPATIBLE WEIGHT PLATES Lat pull-down weight post is for use with Olympic or standard weight platesNot Included. 2 Olympic plates need to be used with Olympic Adapter Sleeves Not Included. Olympic barsweights and weight bench not included. Included Components Power Cage, Lat Pulldown.

Learn How to Strength Train with iFIT Gain access to on-demand trainer-led workouts with a full-access 30-day iFIT membership Wifi and creditdebit card required, cancel anytime. Push-up and Dip Stations Lock in your form for a high-powered upper body workout at the 2-station design target triceps and activate large muscle groups in upper and core regions of the body. Knee-Raise and Pull-up Stations develop full-body muscle by activating core, upper, and lower-body muscle groups simultaneously with two simple stations. Ergonomic Padding Hand grips, back padding, and elbow padding are designed to keep you focused on your workout and remove distractions and discomfort. 300 Lb. User Capacity Protected with a 90-Day Parts Labor Warranty 84 H x 41 W x 57 L Footprint.

LAT Pulldown MachineConnect with thickened steel plate between power cage and LAT machine, 2'' x2'' chrome-plated upright, Provide better stability during exercise. Thick non-slip Footplate, Lat bar, and low pull handle included. Weight plate not included.. HEAVY DUTY STRUCTIONThe power rack supports up to 1000 lbs. LAT machine support up to 220 lbs. Pull up bar supports up to 500 lbs. Assemble dimension of this power cage48.0'' L x 47.2'' W x 86.6'' H. The frame is constructed with high-grade 2'' x 2 steel construction, Rubber non-slip pads encase each foot to add safety, stability, and floor protection.. MULTIFUNCTIONAL FITNESS RACKIdeal for squats, shrugs, bent over rows, wide curls, deadlifts, wide pull-ups, chin-ups, With extra flat bench or weight bench, bench presses, lying triceps, extensions, flat bench presses, decline bench presses, Grip lat pulldown.. J-HOOKS AND SPOTTER ARMSThe solid steel J Hook support up to 1000 lbs. The safety spotter arms for ease of mind and safety assurance when squatting or bench press with heavier weights. The length of the dual-mounted safety spotter arms 36.0''. Extra provide spring clips, prevent J-hooks and spotter arms from falling off.. DESIGNED FOR HOME GYMThe power rack provides various sports experience suitable for your family. TIPS This power cage is divided into two shipping packages, Maybe a separate arrival first. If you have any other questions, Contact Us..

Upgraded Version RitFit Power Cage is 1000 lb rated featuring 2x2 steel uprights. The total footprint of the rack is 44 W x 52 L and it is 85 tall. We have continuous improvement in product development accordingly customers feedback. This upgraded steel makes for a heavier-duty and more stable rack, both in appearance and in reality.. 13 Extra Accessories for Free 2 safety bars, 2 J-cups, 2 dip handles, 4 weight holder pegs come with 2 adaptor sleeves, 1 pull up bar, 1 T-bar row attachment,1 leg hold-down.. A Better Value Overall. The cage has 12 variable height positions, each 2 inches apart. RitFit power cage allows you do not only do squat and bench press, but dead-lifts, rows, pull-ups, chin-ups, and more.2 Olympic plates need to be used with Olympic Adapter Sleeves, 600 lbs weight plate capacity.. Smoother Lat Pull Down System. Our latest Lat Pull Down System introduces a thicker shaft prevent to dent in transit. The high and low pulleys offer a wide range of upper and lower body exercises for a strong and confident physique. Build up your chest, shoulders, back, biceps, triceps, and abdomen using the cable pulleys to target all muscles.. RitFit Warranty. The Basic Warranty lasts for 36 months Main steel frames. The accessories are covered only for 12 months. Full details are given in RitFit Power Cage Warranty..

HALF TON CAPACITY Look no further for the ultimate in high capacity Power Racks with a 1000 LB max weight capacity, you could make serious gains and push past your limits.. ADJUSTABLE PULL-UP BARS The pull-up bars could be adjusted with settings to suit your height or type of workout.. SAFETY AND PERFORMANCE Adjustable J-hooks and spotter arms with 18 settings give you peace of mind as you focus on your strength training.. RESISTANCE TRAINING Attach resistance bands to the pegs located near the bottom of the SF-XF9933 Half Rack Power Cage to add additional resistance training to your strength exercises.. HIGH-PERFORMANCE QUALITY Built for the most toughest and demanding of workouts. 2 x 2 high-quality steel pipe construction makes this one of the most durable strength cages around..

MADE FOR YOUR FITNESS GOALS This heavy-duty power rack cage system and weight rack is built for the pros. The system has a wide walk-in frame design for lateral movement exercises.. CUSTOMIZE YOUR TRAINING CIRCUIT Whether you need a pull-up bar or a squat rack, this power tower is as flexible as you are. Our cage racks are compatible with most Olympic weight plates and your Olympic barbell.. BUILT FOR THE HEAVYWEIGHTS This cage system can hold up to 800 lbs. You can store your weights on the weight-plate storage posts and optionally mount this tower to the floor using the 4 included floor anchors.. SAFETY WITH ACCESSORIES INCLUDED This station includes dip-bar attachments, weight-bar safety catches and full-length safety rods, interchangeable band pegs, and built-in anchors for optimal stability.. FLEXIBLE FOR YOUR WORKOUT This isn't your average weight bench with weights and a bar set. Test out the squat rack, or do a few rounds on the pull-up bar stand. Say goodbye to a standard weight bench..

Stable Construction1300 lbs of real weight capacity with 22.75 tubular steel frame construction offers great stability. The Vanswe power rack E-workout poster which contains 26 different exercises will be sent to to you via Email.. Lat Pull Down AttachmentThis power rack includes high and low row pulley systems can handle up to 300 lbs capacity. High tensile strength nylon coated cable. Easy glide two round chrome guide rails for smooth operation. Includes one 38.6 lat bar and one 13.8 low row curl bar attachments with foam grips. Two 1 weight plate storage and two 2 adapter sleeves suits for standard and Olympic weight plates, two 1 and two 2 clip collars also included. 10 Extra Accessories Four J-Hooks and two safety bars bonus J-Hooks and four 1 weight holder bars. 21 variable positions for safety bars and J-Hooks supports ranging in height from 12 to 67, extra marked numbers for better height recognition. Power Cage Dimensions 48 L x 67 W x 85 H inches. Inside cage dimension 42 W x 50 D inches. Total weight 256 pounds. Our cage is designed with a large walk in space providing easy side to side movement. Ships in three boxes and may arrive separately. Expand the power cage with lat pull-down attachment adding Olympic bars not included and workout bench not included, perfect for exercises of Pull-ups, Lat Pull Over, Squats, Curls, Shrugs, and Bench Press, etc..