Top 10 Best Fluke 773

Digital clamp-meter for 24V loop circuits measures DC to 100mA via clamp and to 24mA in circuit, and DC voltage to 30V. Meter can source and simulate DC signals from 4 to 20mA, can source DC voltage signals up to 10V, and is accurate to 0.2 with a resolution of 0.01mA. Clamp with 4.5mm 0.177 inches jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications. Built-in 24V loop power supply to power a transmitter and measure its milliamp output signal. Meets EN and IEC safety standards 61010-1 and 61010-2-032. Dual backlit display with both mA measurement and percent of 4 to 20 mA span. Measurement spotlight. Measure up to 99.9 mA range non-contact. Automatic power off. 4 to 20 mA scaled output.

Best in class 0.2 accuracy. 0.01 mA resolution and sensitivity. Measure 4 to 20 mA signals without breaking the loop. Measure mA signals for PLC and control system analog IO. Dual backlit display with both mA measurement and percent of 4 to 20 mA span.

Measure up to 99.9 mA range non-contact. Automatic power off. Loop power supply. Dual backlit display with both mA measurement and percent of 4 to 20 mA span. Measurement spotlight. Measure up to 99.9 mA range non-contact. Automatic power off. Loop power supply.

Automatically measures volts ac and volts dc with precise digital resolution. Displays resistance to 1000. Easy and accurate OpenJaw current measurement. Optional holster attaches to a belt and neatly stows test leads. Can stay connected much longer than solenoid type tester.

20 ma dc current sourceloop calibratorsimulator. Dmm designed to meet 1000 volt iec 1010 cat iii. Precision 1000 v, 440 ma true-rms digital multimeter. 100 larger dual display than the 787 ProcesssMeter.

Qualifies cabling performance for 10100Gig Ethernet, tests all copper media cabling twisted pair Category 5-6A, coax, and audio. Includes CableIQ Qualification Tester with detachable wiremap, IntelliTone 200 Digital Probe, Remote IDs 2-7, 2 RJ45RJ45 patch cords, USB cable, coax 'F' push on adapter, 75 ohm coax patch cord, RJ4511 universal coupler, RJ11RJ11 patch cord, user guide, 4 AA and 1 9V alkaline batteries, test accessory soft pouch, duffel style bag, 1 year warranty on testers. Advanced troubleshooting features length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet POE detection. Works on live networks to provide Ethernet switch detection and device configuration, isolate network issues from physical cabling issues. Locate and trace cables with digital toning technology with included IntelliTone 200 Digital Probe, discover what is at the end of any cable and display device configurations speedduplex, pairing.

More precise measurement and calibration source performance, accuracies of 0. 01 percent. 2 separate channels measure, source and view process signals simultaneously. Measure volts, mA, RTDs, thermocouples, frequency and resistance to test sensors and transmitters. Sourcesimulate volts, mA, thermocouples, RTDs, frequency and pressure to calibrate transmitters Maximum current22 mA, short circuit protected. 3 Year.

SafetyMeasure ac voltage, current, frequency without touching a live wire. Faster answersTroubleshoot with all power supply measurements at-a-glance. More informationSee ac voltage and current values at the same time. Works where you need itFork fits over wires up to AWG 40 120 mm2 with a 17.8 mm 0.7 inch jaw opening. Accurate on complex signalsTrue-rms measurements improve accuracy on non-linear loads. Additional testsResistance to 100 k, frequency from 45 Hz to 66 Hz. T6-1000 Pro Exclusive Visible answers in dark work spacesVisual Continuity lights the screen bright green when continuity is detected. T6-1000 Pro Exclusive Consistent ground connection through ground lead and alligator clip supplied. T6-1000 Pro Exclusive AccessoriesHeavy duty black alligator clip and convenient carrying holster included.

Copper cable verifier with swift and simple PoE testing for Ethernet powered devices such as VOIP phones, cameras, lighting, 802.11abgnacax, detects voltages from active 802.3atatbt, PSE sources, negotiates and solicits PoE, Cisco UPOE, and PoH from active sources at the hardware or link layer with LLDP, shows maximum class of power available and voltage to 90 Watts. Includes MicroScanner POE Power over Ethernet cable verifier with detachable wire map adapter, user guide, 2 AA alkaline batteries, carry pouch, 1 year warranty. Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, supports Class 0 to 8 PoE, detects network switch speed capabilities up to 10G Ethernet, cable length, wire map, cable ID, and distance to fault, detects POTS. Test voicedatavideo cables with integrated RJ45 which support low voltage testing with no need for adapters, ensures high quality installations and quick troubleshooting in active network environment, measures length 460 meter or 1500 feet with resolution to 0.3 meter or 1 foot, wire map to TIA 568AB standards, remote ID locators sold separately. Rugged and ergonomic easy grip rubber design locates virtually any cable or wire pair with IntelliTone digital and analog toning, probe sold separately, cable typesTwisted pair UTP, FTP, SSTP.

1000V overload protection on V, Ohms, frequency, and 150V overload protection on mA, backed up by a 440 mA 1000V fuse. Runs about 50 hours typical measurement, 12 hours typical sourcing 12 mA on one 9-volt alkaline battery. Clear LCD display with Backlight. Current Measurement Range 0 to 30 mA DC. 24V loop power supply. 25-Percent Manual Step plus Auto Step and Auto Ramp on mA output. Built-in, selectable 250-Ohm Hart resistor. 0 and 100-Percent buttons to toggle between four and 20 mA sourcing for a quick span check. Very large dual display with enhanced backlight with 2 brightness settings.