Top 10 Best Hard Drive Recovery

Universal IDE Hard Drive AdapterDual-Head IDE Connector 40pin and 44pin plus one SATA II Connector. Support SATA 2.53.5 HDD up to 10 TB, IDE 2.53.5 HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Allowed to operate three hard disk drives simultaneously.. Stable Power SupplyIncluded 12V 2A power cable. 4PIN Power Cable is designed for 3.5 IDE drive.. SuperSpeed USB 3.0Data transfer rates up to 5Gbps, backward compatible with USB 2.01.1. Support Windows XPVista7810 and Mac OS.. Driver FreePlug and play. Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. OnOff Switch for HDD protection. LED light shows Power and Activity status.. What We OfferSATAIDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1 24h-friendly customer service and email support..

The ide to sata adapter is designed to connect your 3.52.5-inch hard drive to a laptop or desktop computer for data transfer. It provides greater backup storage and better protection for data files. It supports copying, backing up and transferring large amounts of data.. . IDE to USB adapter is equipped with a USB 3.0 interface that supports data transfer rates of up to 5Gbps, fast enough to transfer a movie in seconds. It is also backward compatible with USB 2.0 and USB 1.1. Note The actual transfer speed is limited by the settings of the connected drive and computer.. The hard drive adapter supports 2.53.5 SATA and IDE hard drives with one SATA III connector and two IDE connectors and we provide a 4pin power cable for 3.5 inch IDE drives, supporting up to 6TB of hard disk capacity.. The adapter supports Windows 1087Vista, Linux, Mac OS 9.0 to 10.13.3, PS4, Xbox One.Widely compatible with all kinds of SSD HDD, including Western Digital, Seagate, Toshiba, Samsung. It also works with DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVDRW, etc. Supports reading and writing to three drives at the same time.. Firmly connect the IDESATA hard disk to the converter enclosure, then connect the 12V 2A power supply to the power source and connect the hard drive recovery device to the computer using the USB 3.0 cable, then press the ONOFF switch to turn on the adapter.. 1x USB 3.0 to IDESATA converter, 1x USB 3.0 cable, 1x 4PIN power cable, comes with 1x 12V 2A power adapter. If the product has any problems within 3 years, we will replace it for you and provide lifetime customer support for a worry free purchase.

Universal Hard Drive Recovery Converter- Support 2.5 3.5 SATA HDD and SSD 2.5 3.5 IDE HDD DVDCD-ROM, CDDVD-RW Optical Drive, you can easily connect your hard drives through a USB port as an additional external hard drive to read backup data, operate formatting hard drives, and transfer files. SuperSpeed Transfer up to 5GBPS- SATA IDE to USB adapter Data transfer rates up to 5 Gbps, backward compatible with USB 2.01.1. supports UASP. which is 70 Faster than traditional USB 3.0 and a 40 reduction in required processor resources. 6TBHuge Capacity Supportive Designed to be lightweight and compact supports a hard drive capacity of Up to 6TB capacity. external hard drive reader has a SATA III connector and two IDE connectors 40-pin and 44-pin. we Provide a 4pin power cable for a 3.5 IDE drive, Tips Some IDE hard drive is old, you need to set a jumper to turn on the diskset the master disk and the slave disk. Wide Compatibility Hard drive to USB adapter support hot-swapping. universally compatible with Windows 10 8.1 8 7VistaXP, Mac OS 9 10, Linux work with Xbox, Western Digital, Seagate, Fujitsu, Samsung hard drives, etc. When connecting two IDE hard drives, please set the master drive and slave drive based. Additional Functions Plug and play support hot swap onoff switch for HDD protection. Led light shows power and activity status, Included 12V 2A power cable is for providing a stable electricity supply. The 4-pin Molex connector is specifically to power a 12-volt IDE drive when connected. and also Comes with a USB C to USB Adapter, which perfectly matches a MacBook ProMacBook AirChromebookother laptops with a USB Type-C port.

Universal IDE SATA to USB 3.0 Adapter Hard drive reader support SATA 2.53.5 HDD 2.53.5 IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive converter allows you to retrieve old files, backup, cloning and upgrade for a speedy transfer. SuperSpeed up to 5Gbps IDE to USB adapter supports a 5Gbps high-speed transfer rate up to 10x as fast as USB 2.0, which is 70 Faster than traditional USB 3.0 and 80 reduction in required processor resources, Backward compatible with USB 2.0 1.1.. Broad Compatibility External hard drive to usb adapter support Windows XPVista7 8.1 810, Mac OS 10 or higher, Linux, etc. Support devises PS4Xbox, Plug Play, No Drivers Needed NDN for multiple OS. Huge Capacity Supportive Designed to be lightweight and compact. enables access to 2 drives simultaneously. LED indicator light shows Power and activity status.OnOff power Switch for Hard drives protection. Tips Some IDE hard drive is old, In order for you to use a single 3.5 IDE hard drive, you will need to set the jumper to slave before turning on the disk. Comes with Power Supply OTG Adapter The 2 Amp 12 Volt power supply is helpful to be sure you've got enough power for mechanical motors of 3.5 spinning and 5.25 optical drives.4 pin Molex power for a 3.5 IDE drive, USB-C to USB adapter can be plugged into a USB C port to match your laptop.

Universal SATA IDE Hard Drive Adapter Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector. the USB to ide SATA adapter Support SATA 2.53.5 HDD 2.53.5 IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive converter allows you to retrieve old files, backup, cloning and upgrade for a speedy transfer. SuperSpeed Performance up to 5Gbps With an external hard drive adapter, youre only able to use one drive at a time. Fortunately, this means that you can get the same high performance youd expect. it supports a data transfer rate of up to 5 Gbps, supports UASP. which is 70 Faster than traditional USB 3.0 and 40 reduction in required processor resources, Backward compatible with USB 2.0 1.1. Broad Compatibility You can use IDE drives, standard SATA drives, The USB to ide SATA adapter compatible with Windows 10 8.1 8 7VistaXP, Mac IOS, and LINUX just plug the adapter in terminals to the hard drive and USB port on the computer, There are no drivers required. Huge Capacity Supportive Designed to be lightweight and compact. hard drive recovery converter supports a hard drive capacity of Up to 6TB capacity. a enables access to 2 drives simultaneously, Tips Some IDE hard drive is old, In order for you to use a single 3.5 IDE hard drive, you will need to set the jumper to slave before turn on the disk. Additional Functions Plug and play hard drive reader support hot swap onoff switch for HDD protection. Led light shows power and activity status. comes with a 12V 2A power supply, you can power larger form-factor SATA drives or IDE drives and likely others. for IDE drives, you have to use the 4-pin power cable adapter to a plugin.

Drag and Drop File Saving Right out of the Box. Fast Data Transfer with USB 3.0 Connectivity. Compatible with Windows and Mac Computers. Includes 3 Years of Rescue Date Recovery Services.

Easy, intuitive backup and recovery. Efficient all-in-one protection. Secure from cyberthreats. Backup everything in just two clicks. Covers an unlimited number of mobile devices.

Supported HDDSSDFIDECO IDE and SATA adapter is compatible with 2.53.5 SATAIDE hard drives. It can support the connection of 3 hard drives simultaneously one 2.5 IDE, one 3.5 IDE, one 2.53.5 SATA.. Compatible SystemFIDECO hard drive reader is widely compatible with Windows, Mac OS, and Linux. Just plug and play No driver or software is needed. Maximum 5Gbps Super SpeedFIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. It can be also backward compatible with USB 2.01.1. Data transfer has never been so much easier and faster.. Easy Set-upSimply insert your hard drive, connect the power adapter and USB cable, and then turn on the device by pressing the power switch. Note For 3.5 IDE HDD, you need to connect the 4-pin power cable.. Warm NoteFor new hard drive, please go to Disk Management to initialize it first, and then your hard drive can be recognized. If 2.5 and 3.5 IDE hard drives are connected simultaneously, you need to set jumper. The default master is 2.5 IDE hard drive, so you need to set jumper for 3.5 IDE hard drive and set it to slave..

Support 2.5 3.5 SATA HDD and SSD 2.5 3.5 IDE HDD DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. Dual-Head IDE Connector 40pin and 44pin plus one SATA II Connector.. Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.01.1.. Included 12V 2A power cable is for providing stable electricity supply. Note 4PIN Power Cable is designed for 3.5 IDE drive, SATA drives are not applicable and unnecessary.. Plug and play Hot Swap One Touch Backup function OnOff Switch for HDD protection. LED light shows power and activity status.. What we offer USB 3.0 to IDESATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support..

Universal Hard Drive Adapter SATA IDE to USB adapter allows connect your SATA IDE device to computer as an external hard drive via USB 3.0. Compatible with 2.53.5 IDESATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD RW Optical Drive. This is a perfect tool to duplicate, copy, backup, or transfer large amounts of data from one drive to another.. Transfer Rate up to 5Gbps SATA to USB 3.0 adapter supports super speed USB 3.0 enables data transfer rates of up to 5Gbps, backward compatible with USB 2.0high-speed 480 Mbps USB 1.1full-speed 12 Mbps standards. The actual transmission speed subjects to the setting of the device connected .. Wide Compatibility Hard drive to USB adapter support Operate Systems Support Windows XPVista7 88.110, Mac OS 10 or higher, Linux. Compact body design, Support Plug, and play hot swap, OnOff power Switch for Hard drives protection.. Support Hard Drives Capacity up to 6TB Hard drive adapter has a SATA III connector and two IDE connectors 40pin and 44pin. we Provide a 4pin power cable for a 3.5 IDE drive, Tips Some IDE hard drive is old, you need to set a jumper to turn on the diskset the master disk and the slave disk.. Included 12V 2A Power Supply USB 3.0 to IDE SATA adapter included 12V2A AC power supply, for power up the 5V12V IDE devices usage, ensures SATA HDD can be connected well. 4pin power cable is designed for a 3.5 IDE drive LED light shows power and activity status..