Top 10 Best Harmonic Balancer Installer

This Harmonic Balancer Puller Set provides you with everything you need to remove damper pulleys in tight engine compartments without removing the radiator.. Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft. Clevis pins allow jaws to be quickly removed and installed.. APPLICATIONS This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.. Manufacture by high quality 45 steel provides extra strength and longevity with a black oxide finish for corrosion resistance.. Includes 1 x 3-jaw puller, 4 x Forcing rods, 1 x forcing screws, 1 x storage case. Dimension 38 drive forcing screw-90 mm 4 x forcing rods-100 mm, 135 mm, 165 mm, 185 mm..

MANY APPLICATIONS The forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles M16 x 2.0 mm GM, M14 x 1.5 mm Dodge, Chrysler, and Jeep, M12x 1.75 mm Dodge Chrysler, and Jeep, and M12 x 1.5 mm Ford. SAVE TIME AND MONEY Car repairs can be expensive By using this harmonic balancer installer, you will be saving over 600 You can also save time with this balancer installation tool by not waiting for repairs at the auto shop. CONVENIENT PACKAGE All of the pieces in this harmonic balancer installer kit come in one convenient package, making the pieces both easy to find and easy to store Never worry about losing pieces with this harmonic balancer puller set. EASY TO USE Assemble the threaded rod nut bearing with the bearing facing away from the hex Insert the threaded rod through the balancer and fastener into the crankshaft Hold the hex end with a wrench Use a second wrench to rotate the assembly. EFFECTIVE The three puller arms have a significant bite to grip and remove pressed-on harmonic balancers This harmonic balancer puller kit both reduces the risk of stripping threads inside the crankshaft and the risk of breaking crank bolts.

Use with 189 Harmonic Balancer Puller - Remover. Part number 38800. Package Weight 3.45 pounds. Included components 12 adapters.

4Pc axle nut socket set K. Tool solutions for most all situations. Built to exceed tool standards. Strong and dependable enough to last a lifetime. Kit services many automobiles and light trucks. Tool set for removal and installation of harmonic balancers that have threaded holes. Removal pieces combo yoke, national fine center screw, center point piece and bolt pairs. Installation pieces national fine center screw, thrust bearing, forcing nut and jaw nut. Adapters included M12-1.5, M14-1.5, M16-2.0, 716-Inch-20, 12-Inch-20, 916-Inch-18 and 3416. Kit 12 includes 22-Piece for removal and installation of harmonic balancers with threaded holes.

Fit for Small And Big Block Chevy Cranks. Made of high quality steel,1 year warranty. Professional Installation Recommended.

Everything You Need in One Box This 5 piece long reach harmonic balancer installer kit from Orion Motor Tech comes with 4 long reach adapters and a nutbearing assembly for easy damper installation. For Most Popular Makes Models Our adapters feature M16x2.0, M12x1.75, M14x1.5, M12x1.5 threads.. Damper Installation Made Easy Make damper installation a breeze with our harmonic damper installer kit simply thread the nutbearing assembly onto the adapter, insert it into the crankshaft, and rotate until the damper is fully seated. Meticulously Crafted for Seamless Operation Our harmonic balancer installation tools are precisely forged and molded to ensure smooth and damage-free operation. Engineered for Lasting Service These crank pulley installers are blackened and constructed from solid steel for superior strength, corrosion resistance, and durability to withstand heavy daily use.

Profesional Replace Balancer Kit This kit made you to removal and install balancer a breeze, very easy to use and a must-have tool if you're changing out a harmonic balancer. Made the job very quick and easy with no damage to any engine parts,the thrust bearing design on this model is nice, removal and installation of the balancer required minimal effort, went onoff evenly and smoothly. Wide Application Comes with a number of metric and standard bolts so it should work for most applications. Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set to remove worn or damaged harmonic balancers on any vehicle. Specifications M16 x 2.0, M14 x 1.5, M12 x 1.5, 34-16, 58-18, 916-18, 12-20, 716-20 Black screws M10 x 1.5 x 35mm, M8 x 1.25 x 45mm, M8 x 1.25 x 65mm, M8 x 1.25 x 90mm Silver screws UNC 38 x 2, UNC 516 x 6, UNC 516 x 3-12, UNF 516 x 3, UNF 38 x 1-12, UNF 14 x 2-12, UNC 38 x 3, UNC 38 x 4-12, UNC 38 x 2, please carefully check your car's specifications. Tips This kit not fit all the vehicle, not have M12 x 1.75 bolt , Not for LT1 Gen 2 engines, not fit 4.0L Chrysler engine early 2000's Pacifica, 2008-2010 Chrysler TC Limited or Dodge Grand Caravan. Sturdy Harmonic balancer puller made of high quality heavy duty steel, has extremely strength and hardness, the surface has been coated with an anti-oxidation coating to prevent rust, so have long service life, and we offer 12 months warranty, we will refund or replace , if the tool have any quality problem.

Set includes driving screw, thrust bearing, and 13 threaded adapters necessary to work on a wide range of domestic and some import harmonic balancers. Five long adapters for use on Dodge Hemi, generation III and IV GM motors, some Chrysler and some Ford including 3. 5L and 4. 0L. The 1. 75 spacer allows the tool to work more efficiently on deep harmonic balancers. Fit Type Vehicle Specific.

Harmonic Balancer Installation Tool Replace 66515.. Compatible with SBC small block and big Block Chevy crankshafts.. Function This tool makes installing the harmonic balancer simple and easy, Just thread the proper end into the crankshaft and rotate the nut pressing the bearing against the harmonic balancer. Made of high quality grade heat-treat heavy duty steel, galvanized steel nuts and aluminum washers, durability, anti-corrosion and anti-rust. High hardness to provide a much longer service life.. Package include 1X Threaded Rod, 1X Nut, 1X Washers, 1X Thrust Bearing.

HIGH PERFORMANCEThe Crank Strength Of The Harmonic Balancer Installation Tool Is 12.9, And It Is Made Of High-Quality 35CrMo Heavy Steel. The Quenching Process Is Modulated To Ensure That It Does Not Affect Long-Term Use. The Surface Is Black And Rust-Proof. There is No Need To Worry About The Wrench Slipping Off During The Installation Process With Customized Flange Nuts. COMPATIBLE WITH CHEVROLET GM LS LT SERIES Harmonic Balancer Installation Tool Suitable For Camaro, Corvette, Trans Am, GTO, G8, LS Truck Or LS Power Road Signs. Compatible With All GM LS And LT Series Engines From 1997 To The Present Third, Fourth And Fifth Generations. You Can Also Search For Matching Models Through Amazon To Purchase. INSTALLATION AND REMOVAL Can Be Screwed Completely Into The Crank, Just Slowly Twist The Nut Until The Pulley Is In Place. The Upgraded Wrench Plane Is Convenient For Disassembly Without WorryThis Is Required For Engine Replacement Or Balancer Upgrades. A Little Lubricating Oil Will Make It Smoother When Using. PACKAGE INCLUDES 1Stud, 2Washer, 1Thrust Bearing, 1Flange Nut. AFTER-SALES SERVICE If You Are Not Satisfied With The Harmonic Balancer Crank Pulley Installation Tool, Please Return It Within 30 Days For A Full Refund. A Truly Worry-Free Shopping Experience.

Fitment Compatible with all GM LT and LS Series Engines. Compatible with 1997-2023 Gen 3,4,5 NOT Compatible for 1992-1997 Gen 2 LT1 5.7 Engines. Material Made of high quality steel. Durable, Rust-Proof and Corrosion-Resistant. Have a long time using.. Usage Place the nut and washers on the crankshaft, then place the crankshaft pulley on the appropriate position of the engine, last tighten the nut. Easy to Operate. Some lubricating oil Will be better to operate.. Advantage High quality. Easy to operate. Bring convenient to work. Much Safer. A necessary tool for working on engine.. Package 1x Threaded Pole, 1x Strong Nut, 2x Washers. Product Size Detail, please refer to third picture..