Top 10 Best Heat Operated Stove Fan

Heat powered - no batteries or electricity required.. Efficiently circulates warm air throughout the room.. Less consumption, more efficiency.. Innovative and durable design.. Silent operation.

FUNCTION The 5 blades stove fan speed up air circulation and improve the efficiency of fireplace fans, to heat your room quickly. It widely used for wood burning stove, gas stove, pellet stove and more. A thermometer included to monitor the temperature of your stove.. ADVANTAGE No batteries or electricity required. The stove fan driven by the heat generated by the fireplace or wood burning stove and conducts to the fan base to drive the blades. The temperature of the fireplace affects the speed of the fan.. LOW NOISE IN OPERATION The fan will work at less than 25db, heat around room and increase temperature with low noise. Reduce wood consumption from your stove and provide greater comfort. More stable and environmental protection.. PREMIUM QUALITY The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity. Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module.. OPERATING TEMPERATURE The working temperature of the fan is 122F - 662F 50C - 350C.Recommended surface temperature is between 392F - 644F200-340C Don't over 350C662F, avoid damage to the components due to overheating. The purpose of this fan is to spread hot air to entire house, so the wind cannot be too strong. The design of fan blades is also designed according to the effect, but the effect is not so good when the blade is large. If the wind is strong, it will cause cold wind..

MORE EFFECTIVE-This heat powered stove fan with 8 blades circulates 50 more warm air than standard 4-blade fan.. NO NEED ELECTRICITY-Heat powered by wood burning stove top.. WHISPER QUIET-Working noise of CRSURE double motors dual fan is 25dB.. WARRANTY-1-YEAR WARRANTY. No installation required.. SIZE-W20.5D10.8H13.7 cm.. DURABILITY-The fireplace fan is made of high qualified anodized aluminum,rust-proof with good thermal conductivity..

Compact Size--8.7 x 6.7 x 3.6 inches,the material of the stove fan is aluminum.. No Batteries or Electricity required--The stove fan uses heat from the stove surface to spin,adjust its speed automatically with the stove surface temperature.. Longer lifetime--There is a Bi-metallic safety device in the base of the stove fan.If the surface temperature rises above around 300,the safety device gently elevates the front of the fan to protect the TEG and motor.. Whisper-quiet--The only moving part is the blade assembly.You don't even know the stove fan is there,but you FEEL the WARMTH. Less Consumption ,More Efficiency--The stove fan will help reduce the fuel consumption and make the room warmer quickly..

Premium MaterialVodche fireplace stove fan base and blades are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity. Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module.. Large Air FlowOur heat powered wood stove fan circulate heat up to 300 cubic feetminute, faster warm, circulates air throughout the room, maximizes efficiency of your stoves with 50 Fuel Cost Saving.. Quiet No NoiseThe only moving part is the blade assembly, quiet and no noise generate. You will not even know this wood stove fan is there, but you will feel the warmth.. No Running CostNo batteries or electricity required. The eco stove fan driven by the heat generated by the fireplace or wood burning stove and conducts to the fan base to drive the blades. The temperature of the fireplace affects the speed of the fan.. Lifetime Technical SupportIf there is any problem, just contact us directly for solutions. We would help you solve your problems as soon as possible..

Eco-friendly - The wood stove fan will help reduce the fuel consumption and make the room warmer quickly.Spread heat around room and increase temperature, improve warm air circulation results in greater comfort and reduce wood consumption from your stove.. No Power Required - Fireplace fans powered by heat.The wood pellet fan converts heat into electricity by means of a heat-conducting plate at the bottom to achieve rotation.No fire hazards. And the fireplace fan automatically adjusts its rotation speed with the temperature of the surface of the stove.. Very Silent - The only moving part is the blade assembly.The noise of the silent heat powered wood stove fan is less than 25db, you don't even know where the fan is, but you still feel warm.You can enjoy the warm air in a quiet and comfortable environment.Please do not touch it directly with your hands when running work.. Upgraded 4-Blade - Heat powered stove fans are widely used in wood-burning stoves, gas stoves, pellet stoves, etc. The recommended surface temperature is between 122F-644F 50C-340C.No assembly is required, just place the fireplace fan on top of the furnace and the heat fan will spin as the temperature rises.. NOTE - This unique stove fan is designed to be placed on your wood stove to make efficient air circulate indoors quickly and efficiently.Starts when the surface temperature at the top of the fireplace reaches about 50C 122FIt does not provide strong wind power like ordinary fans.If the max temperature on your stove top is even below 100C 212F, DO NOT buy, the fan will can't works efficiently..

8 BLADE TWIN MOTOR Upgrade 8 blades, double motors, blow wind up to 430 ftm, air flow range up to 430CFM, diffusing warm air throughout the whole room. Just place the stove fan on a smooth flat surface of your stove top ,near the side or back of the stovepipe. Need to place stove fan at least 4 away from stovepipe. It will work when the stove surface hot.. HEAT POWERED Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity required, eco-friendly.. ANODIZED ALUMINUM MATERIALOVER HEAT PROTECTION The whole fan is made from anodized aluminum, which will not rust or corrode when the fan is getting hot. There is iron sheet on the stove fan bottom, well protect fan from damage due to high temperature.. SILENT OPERATION As the stove warms up, the wood fireplace Stove fan runs faster and faster, distributing the heat to the far corners of the room. And even at top speed, there is hardly a whisper. Its almost totally silent.. WORKING TEMPERATUREAir Flow 180-230cfm, Running Speed 950-1250rpm, dual head 8 blade fireplace fan starts to rotate when temperature reach 45C113F, The hotter the fire, the faster the blades turn..

Operating Principle The wood stove fan features a TEGs module combined of two metal conductors with a hot sidethe stove surface and another cool sidethe fin. According to Seebeck Effect, this thermal difference creates a potential differencea voltage between the two metal conductors. This transforms thermal energy into electrical energy to power the motor and converts electrical energy to kinetic energy , which then drives the fan to spin to bring warm air across the room.. Warm the Room Hot air ascends vertically by its nature, so actually it escapes from the stovepipe and warms the ceiling area above the stove at first. The firepalce fan blows the original upward hot flow horizontally across the room. So it warms the whole chamber and brings coziness for you.. Energy Efficient Power without electricity or battery. The heat powered stove fan generates its own electricity from the heat produced by the stove. This reduces stove fuel consumption and increases stove thermal efficiency to help you save the bills.. Widely Compatible Stove fan is widely used in wood burning stoves, gas stoves and pellet stoves. Caution It is not suitable for stove with thermal insulation boardbaffle. Place the stove fan near the side or back of the stovepipe so that cool air can circulate through the rear of the fins.. Whisper-Quiet Overheating protection You can hardly hear the sound of fan blades. The dual metallic strips will automatically bend once the stove surface temperature becomes too high. It raises the bottom of the fan and reduces the contact between the stove fan and the stove surface, so as to avoid TEGs units damage by overheating. Please contact us if you encounter any problems, we will provide service within 24 hours..

Updated TechnologyThe heat powered stove fan uses upgraded technology, faster speed, greater air volume. The thermodynamic stove fan is designed to circulate the warm air generated by the woodcoal or pellet-burning stove.. Automatic WorkingThe stove fans start automatically when placed on top of a stove and adjust their speed with the stove temperature. As the stove heats up, the fireplace fans run faster. As the stove burns down and cools, the fans automatically shut off.. Safety MaterialFurnace support is treated with anodized aluminum, which can withstand high temperatures up to 752F 400C, and will not be deformed even if it works for a long time at high temperatures.. Longer LifetimeThere is a Bi-metallic safety device in the base of the stove fan. If the surface temperature rises above around 300, the safety device gently elevates the front of the fan to protect the TEG and motor.. Compact DesignThe Heat Powered Stove Fan is portable and fit narrow spaces, ideal for all kinds of wood-burning stoves, gas stoves, pellet stoves, etc. Any questions, please feel free to contact us, we will reply to you in 24 hours.. Attention If the fireplace fan works under a high temperature for a long time, the colour of the base may turn white or gold, please don't worry it will not affect to use. Any questions about the product, please feel free to contact us, we will reply to you as soon as possible..

FUNCTION The 6 blades stove fan speed up air circulation and improve the efficiency of fireplace fans, to heat your room quickly. It widely used for wood burning stove, gas stove, pellet stove and more. A thermometer included to monitor the temperature of your stove.. ADVANTAGE No batteries or electricity required. The stove fan driven by the heat generated by the fireplace or wood burning stove and conducts to the fan base to drive the blades. The temperature of the fireplace affects the speed of the fan.. LOW NOISE IN OPERATION The fan will work at less than 25db, heat around room and increase temperature with low noise. Reduce wood consumption from your stove and provide greater comfort. More stable and environmental protection.. PREMIUM QUALITY The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity. Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module.. OPERATING TEMPERATURE The working temperature of the fan is 122F - 662F 50C - 350C.Recommended surface temperature is between 392F - 644F200-340C Don't over 350C662F, avoid damage to the components due to overheating..