Top 10 Best High Pressure Fuel Line

High-quality nylon fiber and stainless steel wire materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection. Applications racing fuel, pump gas, ethanol fuel, alcohol-based fuel, engine oil and coolant, etc. SizeIDAN6,Length6.09m20ft,Colorblack,Outside Diameter0.55inch13.97mm,Inner Diameter 0.34inch 8.71mm. Please measure before purchase. Material inner hose CPE synthetic rubberThe middle layer 304 stainless steel wire mesh sleeveThe outer layer High quality braided nylon,Working Temperature -40 to 350 Working Pressure 1000PSI Burst Pressure 5000 PSI. PerformanceAN6 Nylon fiber and stainless steel braided surface are very wear-resistant and have good ductility.Outer nylon braid has excellent flame retardant and performs well at work.Guaranteed production process and quality inspection methods to Ensure product durability and reliability. TipsProfessional installation is highly recommended.Please do not install it in a corrosive environment,which will affect the service life of 6an braided fuel Line Hose.Not Legal in the state of California New York, Not complies with C.A.R.B. regulations.

Size ID 38inch 10mm,OD 23inch17mm. Material NBR.. Working Pressure 290psi. Burst Pressure 1160psi. Temperature Range -40F to 257F. Minimum Bend Radius 3.9inch100mm.. Applicable Medium 38 id fuel line can work with dieselbiodieselgasolineOilgreasewater and air,etc.. Application SAE 30R7 rubber fuel line widely used in fuel system, oil cooling, steam emission, PCV system, please check size and application pressure before purchase.. EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..

Application for racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil coolant etc. Inner Diameter 8.73 mm 0.34 inch, Outer Diameter 14.22 mm 0.56 inch. Working Temperature -40F to 300F. Working pressure 500 PSI. Burst pressure 2000 PSI. Note Double check the hose size before bidding. Our rubber hose should compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT..

Multi-fuel compatibility. Extremely low permeation rate. HNBR tube with thermoplastic barrier, aramid fiber reinforcement and CPE cover. Oil, heat, ozone, and abrasion-resistant cover. Meets SAE 30R14 T2 except for kink resistance, CARB and EPA non-road fuel lines.

PTFE stainless steel braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line, turbocharger fuel line and other high temperature high pressure applications.. Inner Diameter 516. Outside Diameter 0.465inch. Please measure before purchaseIncludes as shown in the picture.. Working temperature range -76 to 446 -60 to 230. Maximum working pressure 3000 psi. Bursting pressure 10000psi. AN-6 stainless steel braided high pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances.. PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..

Nylon Braided CPE Fuel Line Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.. Universal Application The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars motor racing bikes.. Hose Material Covered with high quality woven Nylon and Stainless Steel Braided CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.. Safety Features For Your Protection Fuel Hose SizeID 6AN, Length 20FT, Working Temperature -100 to 500 -73C to 260C , Pressure Tolerance 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.. Package Includes 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..

6AN braided fuel hose kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line.. Nylon and stainless steel braided fuel line kit can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel.. Maximum Working Pressure 500psi. Bursting Pressure 2000psi. Temperature Range -40 to 257.. Package includes 10pcs 6an swivel hose ends 4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree, 2pcs 6an hose separator clamp and 6an braided fuel line Length 20 Feet. Hose ID 1132. Hose OD 0.543inch.. EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

APPLICATION- For racing fuel, pump gas, diesel, motor oil coolant etc. Nylon braided fuel hoses can be used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line.. WORKING ENVIRONMENT-Maximum Working Pressure500 psi. Bursting Pressure2000psi. Working Temperature Range-40 to 257-40 to 125.. SIZE- length20 feet. Inner diameter0.34 inches 8.73 mm. Outer diameter0.56 inches 14.22 mm.. MATERIAL- Inner layerCPE synthetic rubbermiddle layer304 stainless steel wire mesh sleeveouter layerbraided nylon. Resistant to high temperature pressure abrasion and aging. Excellent flexibility and flame retardancy.. NOTE- Double check the hose size before bidding. Our rubber hose is compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT.NOT FIT FOR E85..

HIGH-QUALITY MATERIAL - The 38 high pressure fuel line is covered with high-quality woven Nylon, 304 Stainless Steel braided and CPE synthetic rubber. Long service life, wear-resistance, and high-temperature resistance, perfect for fuel injection.. The 6an nylon braided fuel line kit includes 1 x 6AN 10ft nylon braided hose, 2 x Straight swivel hose ends, 2 x 45-Degree swivel hose ends, 2 x 90-Degree swivel hose ends. A professional installer is highly recommended. The inner diameter of 38 fuel line 8.73 mm 0.34 inch, outer diameter 14.22 mm 0.56 inch. EXCELLENT PERFORMANCE - The Nylon and stainless steel braided surface is very wear-resistant and has good ductility. Outer nylon braided has excellent flame retardant and performs well at work. Guaranteed production process and quality inspection methods to ensure product durability and reliability. WIDE APPLICATION - The 38 transmission hose is specially designed to be commonly used as a transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line. but NOT FIT E85.. CUT AS YOU WANT - The 6an fuel line is 10 Feet 3 m, can be cut to size for all your applications. The 38 fuel hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance..

ID 12. OD 0.68inch.Length 16 feet. Please measure before purchase Includes as shown in the picture.. Working temperature range -76 to 446 -60 to 230. Max working pressure 2000psi. Bursting pressure 6000psi.. Applicable Medium all automotive fuels, lubricants, and coolants.. PTFE nylon braided fuel lines are ideal for high temperature and high pressure applications.. PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..