Top 10 Best Hs507c

Ade Stingray is Designed to to the smallest and lightest red dot to fit any pistol mounting plateslidecut that is compatible with RMRSRO, Holosun 407C507C508T footprint red dots. The overall length is around 15-20 shorter than other major competitors. The shorter design allow this sight to be able to sit in to all optic cutsplatesadapters that designed for rmr. For some optics ready pistols with a large optic cut, there will be a gap between the optic rear dot and pistol rear iron sight.. Ade Stingray created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some of full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacture equipped rear sight, ADE Stingray's rear white dot will acts as a pistol factory original rear sight for Co-Witness. Does NOT fit optic platecut made for Doctor type footprint. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. One year battery life with a single CR2032 batteryincluded. ADE Stingray GREEN dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. Just like 400 RMR competitors, It does not has a onoff power button. The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be sleeping in a very very low power mode. Weight approximately .88oz25grams. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. 6 MOA RED dot. Length1.6 x Width1.1 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Stingray's rear white dot will act as a pistol factory original rear sight for Co-Witness..

The Ade Artemis Pro RD3-022 Pro is a versatile multi-reticle red dot crafted to seamlessly integrate with any pistol mounting plate, slide, or cut compatible with RMRSRO, Holosun 407C507C508T footprint red dots.. ADE has rolled out the PRO SERIES for their RD3 series micro red dots, and one standout in this lineup is the Artemis PRO D3-022PRO. What sets the PRO series apart are the extra features it brings to the table, including a Motion Activated System, Multi Reticle Technology, and the convenience of TopSide battery loading. With this, users can swap out the battery without having to detach the red dot from the pistol, adding a layer of user-friendly functionality.. The Artemis PRO stands out with the industry's first 6-reticle system. Users can seamlessly switch between various options a 2 MOA dot only, a 32 MOA circle only, a four-dashes reticle at 36912 o'clock, a 32 MOA circle with 2 MOA dot, a 2 MOA dot with dashes at 36912 o'clock, or a 50 MOA circle with 2 MOA dot and dashes at 36912 o'clockall with a simple push of a button. This versatility ensures that users can tailor their aiming experience to match different scenarios effortlessly.. The Motion Activated System is a standout feature of the Trumpet. When the device is active, the red dot illumination goes into sleep mode after two minutes of inactivity. However, the moment any motion or vibration is detected, it promptly switches on the illumination at the previous brightness setting, ensuring quick responsiveness to user interaction.. The Top Load System is a game-changer there's no need to remove the sight for a battery swap. With a remarkable battery life of up to 10,000 hours, it ensures long-lasting performance. Offering seven brightness settings, including one specifically tailored for use with night vision, the red dot operates seamlessly with just a single CR1632 battery.. Included in the package are essential accessories to enhance your experience a tool, user manual, lens cloth, red dot cover, screws, and a CR1632 battery. However, it's important to note that the optics plate for a specific firearm is not part of the package and needs to be obtained separately..

This plate is for Ruger 57 pistol ONLY, it does not fit any other pistols.. The plate is compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray, Trijicon RMRSRO, Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight and Holosun 407C507C. Screws are provided for Trijicon, Holosun 407C507C and ADE. The provided screws may NOT work other red dots listed. If not, we recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spike, Holosun 407k507k.. Precision machined out of 6061 aluminum. Weight .4oz.40grain ammo may be necessary for proper cycling due to heavy RMR sights.

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSROScrews provided for Trijicon and ADE. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spke..

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSRO red dots.. Compatible with Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. Finished in a Matte Black Anodize. Comes with two screws to connect this ADE optic plate to Trijicon RMR..

Ade Stingray is Designed to to the smallest and lightest GREEN dot to fit any pistol mounting plateslidecut that is compatible with RMRSRO, HS407C507C508T footprint red dots. The overall length is around 15-20 shorter than other major competitors. The shorter design allow this sight to be able to sit in to all optic cutsplatesadapters that designed for RMR. For some optics ready pistols with a large optic cut, there will be a gap between the optic rear dot and pistol rear iron sight.. Ade Stingray created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the GREEN dot to become a back up iron sight. With the ultra short design, the GREEN dot provides a distancegap on some of full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacture equipped rear sight, ADE Stingray's rear white dot will acts as a pistol factory original rear sight for Co-Witness. Does NOT fit optic platecut made for Doctor type footprint. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. One year battery life with a single CR2032 batteryincluded. ADE Stingray GREEN dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. Just like 400 RMR competitors, It does not has a onoff power button. The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be sleeping in a very very low power mode. Weight approximately .88oz25grams. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. 6 MOA GREEN dot. Length1.6 x Width1.1 x Height.93. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Stingray's rear white dot will act as a pistol factory original rear sight for Co-Witness..

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

Do not return your defective red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the red dot higher to zero. Optic Shim is made to fit between the red dot and the mounting plate.. Fits Trijicon RMRSRO, Ade Advanced Optics, RD3-019, RD3-020, RD3-023, Holosun HS407CHS507CHS507T and. Also fits Riton X3 Tactix PRD, ADE RD3-011, Swampox KingslayerLibertyJustice. The shim might need to be trimmed to the shape to match some of red dot brand mentioned above.. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. Scope base shims Tolerance -.005 Taper 1.0 degree.. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Compatible with Trijicon RMRSRO type foot footprintscrew patternmount holes, there are a few red dot sight sharing this footprints, including ADE Stingray. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.. Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Shield RMSRMSc,Eotech MRDS, Sightmark Mini Shot Red D.

This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith Wesson handguns. While it is possible to install this mount without the use of a gunsmith, we recommend hiring a qualified gunsmith. Please note. Unprofessional installation will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. This mounting plate fits SW Smith Wesson MP Full Size, MP 2.0 Full Size, MP 22 Full Size, MP Compact, MP 2.0 Compact, SD9VE,SD40VE, MP Shield. This mounting plate does NOT fit Smith Wesson MP C.O.R.E Series Already optics ready, MP Shield EZ .380, MP .22 Compact, SW9VE, SW40VE, Sigma. Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSROScrews provided for Trijicon and ADE. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spke..

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Compatible with Trijicon RMR type foot footprintscrew patternmount holes, there are a few red dot sight sharing this footprints, including ADE Stingray, Holosun HS407CHS507CHS508T.. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.. Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Shield RMSRMSc,Eotech MRDS, Sightmark Mini Shot Red Dot Sights.

Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts. This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level.. Compatible with Trijicon RMR type foot footprintscrew patternmount holes, there are a few red dot sight sharing this footprints, including ADE Stingray, Holosun HS407CHS507CHS508T.. Finished in a Matte Black Anodize. Comes with installation screws and allen wrench.. Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex VenomRazorViper, Meopta, Insight, Shield RMSRMSc,Eotech MRDS, Sightmark Mini Shot Red D.

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSRO red dots.. Compatible with Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. Finished in a Matte Black Anodize. Comes with two screws to connect this ADE optic plate to Trijicon RMR..

EQUIPMENT INCLUDES The open reflex optical sight designed to provide a large field of view that will help you to increase your scope of accuracy and quickly acquire targets, picatinny mount adapter, T10L Key, Lens Cloth, and User Manual.. LONG BATTERY LIFE Features included in equipment uses both Solar Failsafe technology and Super LED high capacity lithium ion battery to power optic with up to 50,000 hours of battery life. Making this the perfect sight to carry on hunting treks.. IMPROVEMENTS Includes Lock Mode from our 2018-2019 LE optic models. When Lock Mode is activated, it locks the buttons, preventing inadvertent setting changes. The buttons have been redesigned, placing them lower and out of the way.. ADVANCED TECHNOLOGY Solar Failsafe allows the red dot sight to remain powered when the battery fails, it will automatically adjust brightness under lighting conditions. The Shake Wake feature shuts the LED off during periods of inactive movement.. MULTI-COATED LENS Optic equipment is manufactured using optical glass with multilayer coatings applied to facilitate maximum light transmission and wear resistance while reducing glare vision..

EQUIPMENT INCLUDES HE507C-GR-X2 Green Dot Sight, Coin Battery CR1632, T10L Key, Lens Cloth, and User Manual. LONG BATTERY LIFE Features include Super Green LED high capacity lithium battery to power the optic with up to 50,000 hours of battery life. With the long battery life span, it makes this the perfect sight to carry on long hunting treks.. ADVANCED TECHNOLOGY Equipment includes 12 different brightness settings, including dim settings compatible with night-vision devices for nighttime use. Parallax free optical design, with unlimited eye relief. 10 DL 2 NV Compatible.. SHAKE AWAKE TECH Equipment shuts the Green LED sight off during periods of low motion. When the pointer is under the sun you have a bright reticle, when you move indoors it will automatically switch to low conditions. Custom user programmable.. INCLUDES SOLAR FAILSAFE Optic sight features automatic brightness adjustment when youre under the sun you have a bright reticle, when you move indoors it will automatically dim down to match ambient low lighting conditions..

Great for handguns, rifles, and shotguns. Exclusive, patent-pending ACSS Vulcan reticle. 10 MOA center chevron. 2 Reticle modes. Shake awake technology. Green LED. Solar failsafe. Up to 20,000-hour battery life, Powered by 1 CR1632 Li Ion Battery. Convenient battery tray. Multicoated glass, 7075-T6 aluminum construction, Black hardcoat anodized.

OPEN REFLEX SIGHT Holosun's HS407C-X2 is an open reflex optical sight designed to be compatible with pistols and provide a large field of view that will help you to increase accuracy and quickly acquire targets.. LONG BATTERY LIFE The HS407C-X2 optic uses both Solar Failsafe technology and a high capacity lithium ion battery with up to 50,000 hours of battery life to power the optic.. SOLAR FAILSAFE TECHNOLOGY Solar Failsafe allows the red dot sight to remain powered when your battery fails also features a light sensor allowing the reticle to automatically adjust brightness under any lighting conditions.. SHAKE AWAKE Holosuns Shake Awake Technology shuts the LED off during periods of inaction at the slightest movement, the on-board motion sensor instantly activates the LED.. LOCK MODE This optic offers a Lock Mode that prevents unintentional button presses while the optic is holstered and a side access battery tray, which allows the operator to change the battery without removing the optic from the firearm..

OPEN REFLEX SIGHT Holosun's HS407C-GR X2 is an open reflex optical sight designed to be compatible with pistols and provide a large field of view that will help you to increase accuracy and quickly acquire targets.. LONG BATTERY LIFE The HS407C-GR X2 optic uses both Solar Failsafe technology and a high capacity lithium ion battery with up to 50,000 hours of battery life to power the optic.. SOLAR FAILSAFE TECHNOLOGY Solar Failsafe allows the green dot sight to remain powered when your battery fails also features a light sensor allowing the reticle to automatically adjust brightness under any lighting conditions.. SHAKE AWAKE Holosuns Shake Awake Technology shuts the LED off during periods of inaction at the slightest movement, the on-board motion sensor instantly activates the LED.. LOCK MODE This optic offers a Lock Mode that prevents unintentional button presses while the optic is holstered and a side access battery tray, which allows the operator to change the battery without removing the optic from the firearm..

This Patent Pending Neoprene cover is designed to fit the HolSun 507C HS and also the HoloSun 407C scopes. Will work with The X2 Series. This weather resistant cover will protect the scope in all environments and is soft enough to keep from scratching the scope.. Sold in a 2-pack.. DOES NOT INCLUDE SCOPE.

High-quality soft rubber material, it can prevent dust and scratches..

Compatible with TRUGLO TRU-TEC Micro TG8200 Series, Trijicon RMR, Trijicon SRO, and Holosun HS507C and other compatible mounting systems. Mount a dot-optic on drilled and tapped Remington receivers Fits Remington 870, 1100, 11-87, and VersaMax models. Does not require a Picatinny rail. Mounting hardware and tools included. Allows optic to sit low on the receiver Lightweight, compact design.