Top 10 Best Image Dynamics

12 Dual 4 ohm ID MAX V.4 Series Subwoofer Pressed paper composite cone woofer Parabolic EPDM rubber surround Over 2 long linear excursion RaDiaToR cooling system for heat dissipation Radiant Diametric Torsional Reinforcement High compliance suspension design Flat spider with NOMEX cloth woven tinsel leads High-temperature flat wire, flat wound voice coil Inverted dust cap with logo Powder coated alloy proprietary basket. Power Handling RMS 1200 watts Recommended Power Range 300-1200 watts 3-12 peak-to-peak surround excursion. Nominal Impedance IMP Dual 4 DC Resistance Re 3.0 Resonance Frequency Fs 27.77 Hz Equivalent Volume Vas 72.16 L Electrical Q Factor Qes 0.73 Mechanical Q Factor Qms 2.98 Total Q Factor Qts 0.58. Frequency response 20-250 Hz Peak Excursion Xmax 39 mm Force Factor BL 16.68 Tm Piston Area Sd 545.0 cm2 Sensitivity 85.20 dB 1w1m. Sealed Enclosure Suggestion 1 cu.ft. Ported Enclosure Suggestion 1.75 cu.ft. Displacement 0.14 cu.ft. Mounting Depth 8.15 in Outside Diameter 12.40 in Cutout 11.02 in.

12 Dual 2-Ohm Voice Coil IDQ Series Subwoofer. 375 Watts RMS Per Coil 750 Watts Total RMS 1500 Watts Max RMS Power Handling. Mounting Depth 5.91 Cutout Diameter 10.87. 86.80 dB Sensitivity 30.19Hz Resonant Frequency. Works well in a sealed enclosure with a volume as low as .65 cu ft., but can also be used in ported and single reflex bandpass enclosures. Full specifications provided with subwoofer, and manufacturer's assistance is available by phone to help with enclosure design.

Power Handling Peak 500 watts RMS 50-250 watts.

6.5 ID Series Full Range Coaxial Car Speakers Power Handling RMS 200 watts per pair 100 watts each. Recommended Power Range 10 - 100 watts RMS per channel Mica-polymer composite woofer cone. Butyl Rubber surround 1 25mm Silk Dome Tweeter Y-35 Magnet Motor Structure. Top-mount Depth 2.5 4 ohms impedance. Frequency Response 58-22,000 Hz Sensitivity 90dB.

ID10D2 V.4 - Image Dynamics 10 300W RMS 600W Max Dual 2-Ohm V.4 Subwoofer. Power Handling 100-300W RMS. Frequency Response 16-180 Hz. Sensitivity 86 dB 1W1M. Mounting Depth 5.12.

12 Dual 2-Ohm Voice Coil IDMAX Series Subwoofer. 1000 Watts RMS 1800 Watts Max RMS Power Handling. Mounting Depth 8.15 Cutout Diameter 11.02. 85.20 dB Sensitivity 27.77Hz Resonant Frequency. Works well in a sealed enclosure with a volume as low as .65 cu ft., but can also be used in ported and single reflex bandpass enclosures. Full specifications provided with subwoofer, and manufacturer's assistance is available by phone to help with enclosure design.

Features High Excursion Design allows acoustically linear bass output at all rated power levels. Parabolic Santoprene Surround to ensure cone linearity and control. PolyMica Cone for strong and distortion free bass reproduction while still reproducing all the musical nuances. Nomex Spider for consistent control throughout the piston range and life of the woofer.. Poly Carbonate Neck Joint allows the woofer to handle more raw power without any mechanical failure or flex and isolate the heat from the BASV voice coil former from the cone. American Made Flat Wound Extended Voice Coil gives our woofers higher magnetic flux strength and more voice coil traction in the magnetic gap with over 1.75 of linear travel in the magnetic gap.. Extended Y-35 Motor Structure allows the voice coil to move freely without any mechanical bottoming out while producing a very powerful flux field. Field Replaceable Cone Assembly can be changed in 10 minutes with only 16 screws and alignment shims that come with our recone kits.. Parameters Power Handling 200W RMS 350W Peak. VC Impedance 4-Ohms 4-Ohms, Test Impedance 2-Ohm, Driver Displacement 0.054, Fs 50 Hz, SD 390.57 sqCM, Vas 14.239 Ltr, Cms 65.736 MN, Mms 159.759 g, BL 8.777, Qms 6.233, Qes 1.216, Qts 1.017, No 0.141, Spl 84 dB, Xmax 7.5mm, Voice Coil 2.0, Voice Coil Height 0.98, Voice Coil Type Kapton Former, Voice Coil Wire Copper, DC Resistance 1.9 Ohms, Voice Coil Induct at 1kHz 0.34 MH. Frequency Response 50-500Hz, Resonant Freq 50 Fs Hz, HE-Magnetic Gap Height 0.393, Motor Structure 42.95 oz, Mounting Depth 3.5, Cutout Diameter 9.56..

10 Dual 4 ohm ID MAX V.4 Series Subwoofer Pressed paper composite cone woofer Parabolic EPDM rubber surround Over 2 long linear excursion RaDiaToR cooling system for heat dissipation Radiant Diametric Torisonal Reinforcement High compliance suspension design Flat spider with NOMEX cloth woven tinsel leads High-temperature flat wire, flat wound voice coil Inverted dust cap with logo Powder coated alloy proprietary basket 3-12 peak-to-peak surround excursion. Power Handling Peak 1800 watts RMS 1000 watts Recommended Power Range 200-1000 watts. Nominal Impedance IMP Dual 4 DC Resistance Re 3.15 Resonance Frequency Fs 26.87 Hz Equivalent Volume Vas 48.35 L Electrical Q Factor Qes 0.52 Mechanical Q Factor Qms 2.91 Total Q Factor Qts 0.44 Peak Excursion Xmax 39 mm Piston Area Sd 394.00 cm2 RMS Power 1000 W Sensitivity 84.50 dB 1w1m. Sealed Enclosure Suggestion 0.75 cu.ft. Ported Enclosure Suggestion 1.5 cu.ft. Displacement 0.11 cu.ft. Mounting Depth 7.68 in Outside Diameter 11.06 in Cutout 9.65 in.

4 ID Series Full Range Coaxial Car Speakers Power Handling RMS 100 watts per pair 50 watts each. Recommended Power Range 5 - 50 watts RMS per channel Mica-polymer composite woofer cone. Butyl Rubber surround 20mm Silk Dome Tweeter Y-35 Magnet Motor Structure. Top-mount Depth 1.90 4 ohms impedance. Frequency Response 100-22,000 Hz Sensitivity 87dB.

ID12D4 V.4 - Image Dynamics 12 300W RMS 600W Max Dual 4-Ohm V.4 Subwoofer.