Click here to learn more about these products.
MG Chemicals - 824-1L 99.9% Isopropyl Alcohol Electronics Cleaner, 945 mL (1 Quart) Liquid Bottle
99.9 Anhydrous solventRemoves water and humidity from components leaving them dry. Meets reagent ACS. Meets MIL Spec TT-I-735A and ASTM D770. Less than 0.001 g100 mL non-volatile residues. Suitable for use in food facilities as a non-food chemical. NSF International registration 144029.
MG Chemicals - 422C-55MLCA 422C Silicone Conformal Coating 55 mL Bottle
Protects electronics against moisture, corrosion, dirt, dust, thermal shock, short circuits,high-voltage arcing, and static discharge.. Maximum service temperature of 200 C. Fluoresces under UV-A light. Easy to apply and can be handled in only 10 minutes. Validated for selective robotic coating equipment.
MG Chemicals - 8341-10ML 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)
Superior fluxing ability. Instant wetting. After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant. Compatible with lead free and leaded solder systems. Thixotropic paste RoHS compliant.
MG Chemicals 835-PX2 Flux Pen Soldering, 2 x 10 mL, Amber
For leaded and lead-free solder. Fast wetting. Non-corrosive. Non-hygroscopic. RoHS compliant.
MG Chemicals 99.9% Isopropyl Alcohol Electronics Cleaner, 475 mL Liquid Spray Bottle
99.9 Anhydrous solventRemoves water and humidity from components leaving them dry. Meets reagent ACS. Meets MIL Spec TT-I-735A and ASTM D770. Less than 0.001 g100 mL non-volatile residues. Suitable for use in food facilities as a non-food chemical. NSF International registration 144029.
MG Chemicals - 4885-227G 4885 63/37 Rosin Core Leaded Solder, 0.032" Diameter, 1/2 lbs Spool
Meets J-STD-004 J-STD-006. Non-corrosive and electrically non-conductive flux residue. Standard Flux Core percentage at 2.2 percent. Melting point 361 degree F. 63 Percent tin, 37 percent lead, RA flux core.
MG Chemicals 8241 IPA 70/30 Presaturated Wipes for Electronics - 140 Wipes in a Resealable Soft Pack, Clear (8241-140)
Contains 140 presaturated wipes 7 x 8. Resealable inner-bag prevents solvent loss. 70 Isopropyl Alcohol and 30 Deionized water pre-saturated wipes. Safely removes dust, dirt and grease from electronics. Lint free and tear resistant. Recommended cleaning for the following Audio, video, magnetic, and optical heads Cables Electrical contacts and connectors Fiber optic connectors Optical equipment POS devices and scanners Precision instruments Printed circuit boards Production equipment and workstations Smart phones, pads, laptops, keyboards, and office equipment SMT stencils and screens Surfaces being prepared for coating application.
MG Chemicals - 841AR-340G 841AR Super Shield Nickel Conductive Paint, 12 oz Aerosol
Provides effective EMIRFI shielding over a broad frequency range. Resistivity of 0.0076 cm. Quick dry time, no heat cure required, easy to apply. Strong adhesion to acrylic, abs, polycarbonate, and other injection molded plastics. Low VOC hap free does not contain toluene, xylene, or MEK.
MG Chemicals - 403A-285G 403A 134A Super Cold Spray, 285g (10 oz) Aerosol Can
Non-flammable Safe for use on energized circuits. Packaging may Vary. Chills down up to -50 C -60 F. Non-conductive. Zero residue VOC exempt. Suitable for Use in Food Facilities as a Non-Food ChemicalCanadian and NFS recognition letters available on request.
MG Chemicals 4902P Sn42Bi57Ag1 Low Temperature Solder Paste T3, NO Clean, 25 Gram Pneumatic Dispenser (Complete with Plunger & Dispensing Tip) (4902P-25G)
Low temperature solder paste with non clean flux. Melting point 138 C 280 F. The powder distribution complies with the j-std-005 type 3 with 80 percent min. Between 25-45 m particle sizes. Store refrigerated between 210 C 3550 F to minimize solvent evaporation, flux separation, and chemical activity. Bring the paste to room temperature prior to use. Rohs compliant.
Best Choice
Best Value
