Top 10 Best Micro Stepper Motor

4 Wire 2 Phase Micro stepper motor for Digital Camera or small household electrical appliances. motor diameter 8mm Height 9.2mm Output shaft 0.8mm. The output shaft length 4mm. 12teeth 0.2mod Rate Vlotage 3VDC. Drive mode 2 phase 4 wire micro stepper motor.

1. This is a precision 8MM micro stepping motor, widely used in digital products such as digital cameras and other small appliances.. 2.Suitable for voltage 5-6V, driving current is 0.12A, short-circuit current is 0.14A.. 3. Each pair of motors is bundled by two motors, the output shaft length is 4mm and 3.5mm respectively, and the gears are installed separately.. 4. Motor diameter 8mm, motor height 8.2mm, output shaft diameter 1.5mm, gear outer diameter 2.2mm. 5. Distribution of long-axis motor connection lines blue A , black A-. Red B , white B- Short-axis motor connection line distribution purple A , yellow B-. Orange B , green B-.

5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.. Stepper motor with a standard interface could be connected with Driver Board easily A, B, C, D four-phase LED indicates the status of the stepper motor work.. 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking.. Package Includes5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.

NEMA 11 Hybrid bipolar stepper motor, 12Ncm17oz-in holding torque. Frame Size 28 x 28mm, Body Length 51mm. 4-wires Black, Green, Blue, Red. Rated current 0.67A ,Step Angle 1.8, resistance 9.2ohms. Shaft Diameter 5mm , Shaft Length 20mm.

Stepper motor driver DM542T is updated to version V4.0, The old and new version are subject to shipment.. Industrial-grade Stepper Driver, Suit for Nema 17 and 23 Stepper Motor. 1.04.2A, 2050VDC, 1128 Microstep Resolution. Pulse signal 4-5V when PUL-HIGH, 0-0.5V whenPUL-LOW. The same as DIR and ENA signals.

Motor Micro 2 phase 4 wire Stepper motor. Voltage 3V-5V DC , Step angle 18 degrees. Motor size 15 MM x 11.3 MM. The output shaft length 6.5 MM with an aluminum alloy gear top diameter 4.45MM, modulo 0.25. Weight 9 g.

5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.. Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work.. Motor diameter 1.1 inches.Wire length9.05 inchs. Stepping angle 5.625 x 164.Reduction ratio 16.Drive Module Board Size1.26 inchsX1.38inchs. Cable length about 20cm 8-inch.. Great packing in a box 5 set Uln2003 Stepper Motor Driver Board.. Good after-sales service..

Drive voltageDC 5V. 5V short-circuit current0.3A. Note The use of these motors requires a professional levelWe can'tprovide technical support.please buvers make sure that you can use the motor by yourself. Package Included10Pcs DC 5V 2-Phase 4-Wire Micro Mini Ultra-Tiny 4 mm Precision Stepper Motor DIYIf there are any problems with the product, please send us pictures.Tell us more details about this problem.. Thank you so much for your purchasing from our store.Any question ,please feel free to contact us..

Small Size High Torque. 4 Ncm5.7 oz.in holding torque. NEMA 8 bipolar 0.79x0.79x1.57 4-wire. 1.8 deg. step angle200 stepsrev. Rated current 0.6A resistance 10ohms.

H bridge bipolar constant phase flow drive,9V-42V DC power supply.. 8 selectable peak current, including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A. Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.. Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.. Suitable for any small-and-medium automatic equipment with CNC controller, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines, and pick-place devices..