Top 10 Best Plumbing Heat Tape

Self-fusing Silicone Tape that does not melt up to 260C 500F making it ideal for emergency repairs for automotive, plumbing, marine, hose, electrical, indoor and outdoor applications.. Silicone rubber has a tensile strength capacity of 900 PSI, giving it superior water and air tight sealing performance for high pressure pipe leakages.. Corrosion-proof and has high resistance to heat, harsh solvents, chemicals Meets UL 510 standards and ISO 9001 on Industrial Grade Sealing Application.. Flexible, Stretchable and conforms even to small pipe diameters, tight corners and cold environments up to -50C -60F. Insulates up to 600 voltsmil and dissipates heat generated well so as to resist melting, weathering and tearing..

For metal and plastic residential water pipes. Keeps water flowing down to -40 degrees F. For use on 2 in. metal and plastic water pipes.. Easy to install. 120V, 7 Watts per foot..

6Ft x 120V x 7Wft.. Keeps water flowing down to -40 degrees F. For metal and plastic water pipes. Easy to install.

THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. Weve received a couple bad reviews from people testing the cables in their living rooms. Please dont be that guy.. TAPE INCLUDED 16 feet of high-temperature glass cloth tape is included with this cable.. HEAVY DUTY Integrated thermostat turns cable on at 37 degrees, off at 50 degrees, greatly reducing energy waste. Cable is 8mm wide and includes a 24 unheated cord add to stated cable length. Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY, which is double the warranty of similar cables on Amazon. Will not short or burn out if cable is overlapped.. USES Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more can be exposed directly to water and is rated for soil contact..

18 ft. Length.. 120V, 7 watts per ft.. Keeps water flowing down to -40 degrees F.. For metal and plastic pipes.

JHSF doesn't work unless the ambient temperature is below 37F3 degree C. Please test the cable in a cold environment.. Suitable for use on plastic and metal water pipes. including inlet pipe,drain pipe, sewer , palm tree frost protection etc. Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.. Pre-assembled, easy to install. Including grounded plug with light, built in thermostatturn the cable 37F on 50F off and instructions. 120 volt, 3 wattsft at 50 degrees F. Protect pipes up to 2 in diameter. Can be used by straight, spiral and overlap.. ETL approved. 2 ft 183 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE high-low temperature as out jacket. Ingress Protection 65.. Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..

12 Foot Heat Tape with Plug Installed-other lengths available. Pre-Cut Roll of Easy Heat Self Regulating Heating Cable. Plug Head End Caps Pre-Installed. NOT designed to be submerged in water or get wet.

4 Foot Heat Tape with Plug Installed-other lengths available. Pre-Cut Roll of Easy Heat Self Regulating Heating Cable. Plug Head End Caps Pre-Installed. NOT designed to be submerged in water or get wet.

25 Foot Heat Tape with Plug Installed-other lengths available. Pre-Cut Roll of Easy Heat Self Regulating Heating Cable. Plug Head End Caps Pre-Installed. NOT designed to be submerged in water or get wet.

Suitable for use on plastic and metal water pipes including inlet pipe, drain pipe, sewer, palm tree frost protection, etc. Industrial grade self-regulating heating cable. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheating risk. More Safe. Can be used by straight, spiral and overlap. More functional.. Fluoropolymer One of the most heavy-duty plastic material as the out jacket. Can be used underwater application. Please keep the connection waterproof IP65 between the orange cold lead and black heating cable above the water. The black heating cable including end seal meets waterproof IP68. JHSF1-CT cables are configured for use in nonhazardous and hazardous locations, including areas where corrosives may be present.. Protect pipes up to 2 12 in diameter. For better freeze protection, at least 12 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20F-29C, please use 1 thick insulation material. Pre-assembled, Including grounded plug with light, easy to install and use without built in thermostat. 120 volt, 5 wattsft at 50 degrees F for pipe freeze protection.. Roof deicing application Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite tar and gravel roofs and so on. Rated 10Wft at 32F 0C for roof deicing. For roof deicing applications, you may need to buy clips and hangers separately.. Testing the cable before the installation. Uncoil the cable, plug in the heating cable Normally you can feel the slight warm on the heating cable in few minutes..

40 Foot Heat Tape with Plug Installed-other lengths available. Pre-Cut Roll of Easy Heat Self Regulating Heating Cable. Plug Head End Caps Pre-Installed. NOT designed to be submerged in water or get wet.