Top 10 Best Poe Splitter Usb C

What is it - A UCTRONICS PoE splitter to split the PoE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-PoE devices can be powered over Ethernet.. What is PoE Deliver power and data with a single Ethernet cable for fewer wall plugs and messed cables. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source. Why PoE to USB-C A cost-effective way to add plug-and-play PoE support to 5V USB-C powered devices and make full use of PoE switches, or for a Raspberry Pi 4 setup where a PoE HAT is not applicable. What else needed - You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE Power Source Equipment and an Ethernet cable with PoE signal to feed the splitter.. Note 1. This splitter does not support PD or QC fast charging protocols. 2. This splitter provides a maximum output of 2.4A with its 802.3af compliance. Check B07V35DH5F for power-hungry applications. 3. Just put the split Ethernet aside if you dont need the data. 4. The Split Ethernet cable does not carry power anymore..

The POE splitter must be connected to the POE switch, POE midspan or 48V52V POE injector for proper operation.

Compatible with Raspberry Pi 4B3B,Amazon Ethernet Adapter for Amazon Fire TV Devices,ASUS Tinker Board. 12 watt micro USB Power over Ethernet PoE up to Remote 328-492ft 100-150m via Ethernet cable, 802.3af PoE switch or 48v injector is needed. Power Output Port 5V 2.4A Micro USB Power Plug. NoteThe POE splitter must be connected to the POE switch, POE midspan or 48V52V POE injector for proper operation..

OUTPUT 5V DC power out 5V 2.4A 12watts Max., Plug USB Type C , 101001000Mbps ethernet data. INPUT IEEE 802.3af DC44-56V from poe switch or poe injector. PLUG and PLAY Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet. APPLICATION works with non-PoE network devices that require a 5V dc input with Type-C port and a ethernet input. WARRANTY 2 years and unlimited technical support, Package content 2x 5V gigabit PoE splitter.

Split PoE siganl into Ethernet date 1000Mbps max and USB-C DC power 5V4A max, Fully complies with IEEE 802.3afat PoE Switch or Injector Required but not included, Output 20W max 5V4A at 802.3at and 12.5W max 5V2.5A at 802.3af through USB Type-C connector.. PoE HAT Alternative - Alternative way to achieve POE function for all models Raspberry Pi which has network interface, such as Pi 1B, 1B, 2B, 3B, 3B, 3A, 4B. And no need to dismount raspberry pi case or add-on screen anymore by using AuviPal USB-C PoE Splitter. PLEASE NOTE You need to buy extra USB-C female to Micro USB male adapter for Raspberry Pi 1B, 1B, 2B, 3B, 3B, 3A which has a Micro USB power interface.. It utilizes the optimal PoE module solution with isolation transformer Standard PD Powered Devices chip. Run your Raspberry Pi and other USB-C devices more stable and safer.. Plug and play - Simply connect the ethernet and power cables, then you are ready to go. Set it up in seconds without any extra effort or configuration.. Suitable for any USB-C Devices Raspberry Pi 4, Camera, Phone, Tablet and more which need DC 5V power. PLEASE NOTE it does NOT support QC or PD fast charging protocols, Besides, if you want to use it for newest Raspberry Pi 4, we suggest you buy IEEE 802.3at PoE Switch or Injector Which can output max 20W 5V4A first.

OUTPUT 5V DC power out 5V 2.4A 12watts Max., Plug USB Type C , 10100Mbps ethernet data. INPUT IEEE 802.3af DC44-56V from poe switch or poe injector. PLUG and PLAY Require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet. APPLICATION works with non-PoE network devices that require a 5V dc input with Type-C port and a ethernet input, please note this spitter is only compatible with 10100Mbps Non-PoE devices, it DOES NOT support gigabit Non-PoE devices. WARRANTY 2 years and unlimited technical support, Package content 2x 5V PoE splitter.

Compatible with Raspberry Pi 4B3B,Amazon Ethernet Adapter for Amazon Fire TV Devices,ASUS Tinker Board. For 2pcs, refer to ASIN B08FLWV9YD. 12 watt micro USB Power over Ethernet PoE up to Remote 328-492ft 100-150m via Ethernet cable, 802.3af PoE switch or 48v injector is needed. Power Output Port 5V 2.4A Micro USB Power Plug. NoteThe POE splitter must be connected to the POE switch, POE midspan or 48V52V POE injector for proper operation..

Convert IEEE802.3at PoESuch as our model PT-PSE101G-ATPoE Switch or 30W passive PoE Power to non-PoE Devices that accept USB-C power. USBC female output from 5V-20V base on the required of your Type-C device up to 27W with over voltage, over current, short circuit protection, ideal for computers, IPads, Macbook, Google Wifi and other Type-C devices. RJ45 socket deliver signal to USBC device or other Network device if needed,pass through data rates at 101001000MbpsGigabit. The effective distance is 100 meters109ydfrom PoE injectorPoE Switch to Type-C device. Please note that Typec port only deliver power without data via USBC cable, RJ45 port only deliver data via Cat5Cat5eCat6 cable.

Split POE siganl into Ethernet date 1000Mbps max and USB-C or 5.5x2.1mm barrel port DC power 5V4A max, Fully complies with IEEE 802.3afat POE Switch or Injector Required but not included, Output 20W max 5V4A at 802.3at and 12.5W max 5V2.5A at 802.3af.. PoE HAT Alternative - Alternative way to achieve POE function for Raspberry Pi 4 and NVIDIA Jetson Nano, No need to dismount raspberry pi case or add-on screen anymore by using AuviPal POE Splitter.. It utilizes the optimal PoE module solution with isolation transformer Standard PD Powered Devices chip. Run your Raspberry Pi and NVIDIA Jetson Nano more stable and safer.. Plug and play - Simply connect the ethernet and power cables, then you are ready to go. Set it up in seconds without any extra effort or configuration.. Suitable for NVIDIA Jetson Nano and any USB-C Devices Raspberry Pi 4, Camera, Phone, Tablet and more..

Support international standard IEEE802.3 af POE port Support 101001000Mbps data transmission. Transfer Rate 101001000Mbps, Standard IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af.. 5V3A power output using Type-C, the Type-C port only for power-charging.. PD support 44V - 57V voltage transmission, Automatically detects power supply from PSE power supply module.. Support the isolation circuit protection, can effectively protect electrical equipment Support the short circuit, overvoltage protection. TypeC POE Splitter base on IEEE802.3af standard. It can separate the power and data via cable transmission.Proper matching use with poe switch or PSE injector which meet standard IEEE802.3af,Provides power and data at the same time for the terminal device does not support PoE..