Top 10 Best Poly Glow

The Deluxe Kit is EVERYTHING included in our Poli Glow Kit. THE DELUXE KIT INCLUDES 1 Poli Glow Kit One 32 ounce bottle of Poli Glow, One 32 ounce bottle of Poli Prep, a mitt applicator, white scrub pad with handle, and gloves, a 20 ounce bottle of Poli Ox and two ultra-fine scrub pads. The combination of Poli Ox and the ultra-fine sanding pads will REMOVE AND TREAT heavy oxidation and stubborn stains, bringing the surface to a UNIFORM FINISH. This product includes everything needed for fiberglass that is DARKER IN COLOR, heavily OXIDIZED andor STAINED.

MAINTENANCE KIT IS TO MAINTAIN THE SHINE Poli Glow gives the surface after a year. SURFACE MUST BE CLEANED of any dirt and debris before applying the maintenance coats.. Used for OVERSIZED BOATS over 25' and OVERSIZED RVs over 25'. KIT INCLUDES 32 ounce bottle of Poli Glow and Microfiber Mitt Applicator.

Poli Glow Products HIGHLY RECOMMENDS purchasing the Poli Glow Kit with the initial application of Poli Glow.. SUITABLE FOR fiberglass and gel coat surfaces Ideal for boats and RVs and lasting for about a year. WATER-BASED POLYMERS for superior quality effects without flaking off or yellowing the surface Oil-free, non-wax formula. UV PROTECTORS prevent from damaging and discoloring effects of the sunlight and assure long-lasting results. EASY TO USE by repetitive wiping on MINIMUM OF 6 COATS, allowing to dry in between coats 32oz bottle allows for treatment of 25 foot boat or RV, depending on the condition of the fiberglass.

Poli Glow is a PROVEN CONCEPT in boat polish and is 'NOT' a boat wax. It is easily applied. It wipes on without the need for rubbing or buffing. It will not wash off with soap and water. Lasting over 12 months, in the Florida sun. This complete Boat Polish kit includes enough products for up to a 28' boat or RV, depending on the condition of the fiberglass... Poli Glow will work on the following RV's, boats, canoes, motorhomes, painted fiberglass, painted metals, rubber and vinyl lettering. A MINIMUM OF 6 coats MUST BE APPLIED. THE POLI GLOW KIT INCLUDES One 32-ounce bottle of Poli Prep, One 32-ounce bottle of Poli Glow, 1 microfiber Mitt Applicator, 1 white scrub pad with handle, and 1 pair of gloves.

Original applicator that is designed to ensure even distribution of Poli Glow. This chamois applicator can be mounted on a pole.

Poli Strip will easily remove Poli Glow, Vertglass and other fiberglass restorer products. HEAVY DUTY CONCENTRATED liquid stripper is designed to be used when completely stripping the Poli Glow finishes. DILLUTION RATIO mix one part Poli Strip liquid with two parts clean water in a triggerspray bottle or pump sprayer. SPRAY mixed solution on a dry surface, approx 5 square ft.SCRUB VIGOROUSLY with a scrub pad and rinse with clean water.. Poli Strip will not harm vinyl graphics.

Poli Ox is a powder cleanser that will remove HEAVY oxidation. Removes fish blood, rust stains, mineral deposits, scum line and brown water stains. Cleans and polishes stainless steel, chrome, aluminum, bronze, brass, copper, and glass will not scratch the glass. Poli Ox also cleans and polishes stainless steel, chrome, aluminum, bronze, brass, copper, and glass will not scratch the glass. Cleans and brightens teak. The ultra-fine sanding pad is equivalent to 1200 wet and dry sandpaper, but more durable than sandpaper. Includes one 20 ounce bottle of Poi Ox, two ultra-fine sanding pads and one non-abrasive scrub pad with handle.

The Mitt Applicator was designed to replace the 7 hand-held chamois applicator.. PREPARATION OF POLI GLOW WITH MITT APPLICATOR Dampen the Mitt with fresh water, wring out, wrap in a towel and wring out remaining moisture. During application, the Mitt Applicator may have to be rinsed out from time-to-time. Repeat the initial process and resume application. The Mitt Applicator should be damp, not wet. Always wear rubber or plastic, disposable gloves under the Mitt Applicator.. APPLICATION OF POLI GLOW Drizzle several lines of Poli Glow onto the palm of the mitt. Mitt Applicator should be moist, not dripping wet. Apply Poli Glow by wiping in one direction similar to painting varnish top to bottom or side to side. Do not wipe in a circular motion, instead work in a 4x 6 section. Each coat dries in approximately 1-2 minutes depending on temperature. Apply a minimum of 6 coats of Poli Glow and move on to the next section.. MICROFIBER MITT APPLICATOR.

Does NOT contain toxic chemicals like Methylene Chloride and NMP. Poli Prep is designed to prepare the surface prior to using Poli Glow. Removes wax build up as well as stains caused from exhaust, fuel, and oil. Removes oxidation from fiberglass and painted surfaces. POLI PREP WILL NOT REMOVE POLI GLOW removes wax build up as well as stains caused from exhaust, fuel, and oil. 32 ounce bottle of Poli Prep Concentrate.

Sizing - All of our rings are made according to US Sizing and are a standard fit ring. Please keep in mind, the band width can affect how the ring will fit. The wider band widths will sit on the fattier part of the finger making it feel tighter. We recommend with a 9mm or 10mm band width you go up half size from what you normally wear. We also offer free exchanges until you have the perfect fit. Proprietary Nasa Technology in Each Ring - Having decades of experience with carbon fiber and composites, we invented a unique process for NASA that we use in every Core Carbon Ring made. The process allows for an extremely strong, lightweight, comfortable, and truly unique ring.. Handcrafted on the Space Coast of Florida - Each ring is professionally and individually handcrafted giving you a one of a kind piece.. Satisfaction Guarantee - We want you to be completely satisfied with your new ring. If you are not for any reason, please contact us. We will be happy to exchange the ring until it is a perfect fit or it can be returned for a refund.. Handcrafted in the USA with a Lifetime Warranty.