Top 10 Best Raindrip Pressure Regulator

Lowers incoming water pressure from a water source and filters out particulates for optimal performance of your drip system Connects to pipe commonly used in underground valve systems. Attach the pressure-regulating filter to pipe with a in. MPT connection point Use with a in. FPT Swivel Adapter to connect supply tubing. Attach the pressure-regulating filter to pipe with a in. MPT connection point Periodically flush out the system by removing the flush cap, also known as a cleanout cap, and running the water the filter can also be removed from the middle housing and pulled out to clean. Regulates water pressure from water source preset at 30 PSI, ideal for most drip irrigation systems 200-mesh filter washer blocks particles in the water from clogging emitters filter is removable for cleaning and maintenance Filter can be flushed out by removing the flush cap or cleanout cap and running water through also can be removed from the middle housing to clean. Comes with one in. MPT X in. MPT Pressure-Regulating. Y Filter.

Regulates water pressure from water source preset at 30 PSI, ideal for most drip irrigation systems Maintains 30 PSI. Attach to a in. MHT outdoor faucet, hose bibb, or spigot Use with a in. FHT Swivel Adapter to connect supply tubing. Lowers incoming water pressure from a water source for optimal performance of your drip system Connect to an in. MHT outdoor faucet or hose bibb. Attach the pressure regulator to outdoor faucet, hose bibb, or spigot with in. MPT connection point Periodically check for damage and replace as needed.

The most flexible pressure regulators, though suitable only for drip watering systems, sprinklers and misters. Molded high-impact ABS. Made in China. Brand name Raindrip.

The pressure regulator is a combination piece that includes a filter and extends 6 inches from the riser Attachment. Choose Tubing that is right for your needs. Sold Separately. Tubing is available in standard, Pre-Assembled and soaker variations and are readily available. Ideal solution to water all types of plants. Contains a Cut-off riser, pressure regulator and filter combo fitting, 2 universal adapters, 1 hose thread cap, which is provided in layouts where Only one drip per line is needed. It has a 12-inch FPT bottom connection and two top hose thread outlets compatible with the included universal adapters.

12 female-threaded inlet. Can be installed above or below grade. Can be used with xeri-bird 8 multi-outlet emission device. Flow 0.50 to 4.00 gpm 30 to 240 gph 1.9 to 15.1 lm.

34-inch hose thread inlet by 34-inch hose thread outlet. For pressure up to 80 psi. Preset at 25- 30 psi. Durable plastic construction. Built to last. Hose regulator. Maintains 25 to 30 PSI for circuits totaling 480 gph. 34-Inch hose thread inlet by 34-Inch hose thread outlet. Carded. Hose regulator. Maintains 25 to 30 PSI for circuits totaling 480 gph. 34-Inch hose thread inlet by 34-Inch hose thread outlet. Carded.

Ideal for installations requiring lower flows such as solid set, drip line, soaker hose and other low pressure agriculture, residential and commercial irrigation. This PRLG Pressure Regulator Landscape Grade maintains a constant outlet pressure of 25 PSI 1.72 bar with a flow range between 0.5 - 7 GPM 114 - 1590 Lhr.. 100 water tested for accuracy. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance.. Proper use of this low flow water regulator maintains sprinkler or droplet flow, distribution uniformity, and the overall efficiency of an irrigation system. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery. Works with any standard 34 outdoor faucet, hose bib, garden hose, water hose, sprinkler manifold, garden soaker hose or home irrigation system.. Made in the USA of engineering-grade thermoplastics. This sturdy inline plastic water regulator can be installed above or below ground. No external metal parts for excellent corrosion resistance.. Note This irrigation pressure regulator regulates dynamic water pressure the pressure while water is flowing. If measuring this regulator with a pressure gauge, do not screw the gauge directly onto the end of the regulator. This blocks the flow of water and measures static pressure, not dynamic pressure. To measure dynamic water pressure, attach a gauge at the end of your irrigation tubing line, or use an inline gauge that allows water to flow unblocked through the regulator..

FITS ALL STANDARD FAUCET AND GARDEN HOSES - Easy turn swivel connector on hose adapter attaches quickly to standard spigot or hose connection. Connects to the spigot easily with the wide black grip. No wrench or pliers needed.. SOLID BRASS FOR LONG USE WITHOUT LEAKAGE OR CORROSION - Heavy-duty and eco-friendly solid brass construction make the hose connector support up to 0.8MPa pressure without leakage and last from season to season without rust. Extra 6 rubber washers included to prevent the hose connector from leaking.. SPLIT 1 SPIGOT INTO 2 OUTLETS AND MORE - Run 2 hoses from the same spigot with one hose splitter, and you can even connect more hoses to your backyard sink, drip irrigation, sprinkler timer system, hose end tap timer with more hose splitter. Made for home, garden and backyard use.. EASY-TO-TURN INDIVIDUAL VALVES COMFORTABLE GRIP - Covered with thermoplastic rubber for easy grip and operation, the valves allow you to control the flow separately and easily without going back and forth to the source.. EFFICIENT AFTER SALE SERVICE- With IPOW Hose Splitter, easily taking care of plants, showering pets, washing car, cleaning house and more situations without switching hoses frequently This hose splitter enjoys a hassle-free customer service for any issue. Now move your finger and click Add to Cart.

Maintains optimum 25 PSI pressure and water flow to Drip lines and emitter devices. Connects to any 34 male pipe threaded faucet, garden hose or component. 20 gallon per minute flow through capacity. Durable, robust design provides reliable operation. Constructed of highly durable UV and chemical-resistant materials. To automate your system, add a Rain Bird 1ZEHTMR Hose-End Timer sold separately.

Get started with drip irrigation with a kit that contains all the essentials you need to water up to 200 sq. ft. Use the kit to set up a drip irrigation system on its own, or to expand on an existing drip irrigation system. Y connector fits faucethose bibb timer connects to Y pressure regulatorfilter connects to timer connector on supply tubing attaches to pressure regulator Clamp N Pierce with feeder lines and sprayers connect anywhere along supply tubing Non-pressure compensating half-circle adjustable sprayers have a 13 GPH flow rate Use with in., 58 in., or 0.710 in. Supply Tubing to transport water to plants. Kit installs in three steps 1 Connect the timer and supply tubing to the water source 2 Lay out the tubing and 3 Attach the preassembled water lines and place next to your plants Kit includes instructions, guide, and contact information Periodically check for leaks or damage remove end closures and flush circuits until the water runs clear in cold climates, winterize by completely draining the system to prevent lines from splitting remove timer and batteries to prevent corrosion. Kit contains everything you need to get started, including preassembled parts no tools required Easy 3-step installation system many parts screw in or snap together. Kit Includes Timer Pressure RegulatorFilter Y Connector 50 ft. of in. Poly Tubing with in. FHT adapter 10-2 ft. Clamp N Pierce in. feeder lines with 2 GPH drippers Smart Loc Tee Plug 5-Steel Stakes 10-Support Stakes 5-Barbed Couplings.