Top 10 Best Rmr Plate

This optic mounting plate made by ADE Advanced Optics is designed to connect optic sight to certain Smith Wesson handguns. While it is possible to install this mount without the use of a gunsmith, we recommend hiring a qualified gunsmith. Please note. Unprofessional installation will result in screw loose, not holding zero, damage to the firearmoptic and personal injury.. This mounting plate fits SW Smith Wesson MP Full Size, MP 2.0 Full Size, MP 22 Full Size, MP Compact, MP 2.0 Compact, SD9VE,SD40VE, MP Shield. This mounting plate does NOT fit Smith Wesson MP C.O.R.E Series Already optics ready, MP Shield EZ .380, MP .22 Compact, SW9VE, SW40VE, Sigma. Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSROScrews provided for Trijicon and ADE. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spke..

ADE RD3-023 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol with a PISTOL that is compatible with RMRSRO, Holosun 407C507C508T footprint red dots. The Valkyrie fits all pistol with optic cuts for Trijicon RMRSRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMRSRO.. The Valkyrie Gen 2 also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, SW MP 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F10C optics ready, Walther Q5 Match and Springfield XDXDMXDS OSP, Canik TP9 SFXCombat, FN 50945 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint.. Those name brand pistol manufacturer made Optics Ready handguns all come with several mounting platesoptic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR.. ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacture equipped rear sight, ADE Valkyrie's rear white dot acts as a pistol factory original rear sight for Co-Witness. 4 MOA GREEN Dot. Comes with a picatinny mounting plate and a pair of screws. This red dot does NOT comes with any other optic plate to mount on an specific pistol. Operates with a single CR2032 batteryinstall underneath. Gives around 800 hour battery life. Auto powers off after 1 hour of inactivity to save battery.. Dimension 1.79x1.18x1.4 inches. Weight 1.24 oz. ShockproofFogproof. Fully lockable windageelevation.. This model is the original ADE Valkyrie, ADE also have a ADE Valkyrie Gen2. The difference between ADE Valkyrie and ADE Valkyrie Gen2 is that the Gen2 is slightly shorter in overall length, and the shorter length allows Gen2 to sit into custom RMR cut, while original Valkyrie only fits optic plate for RMR footprint..

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSROScrews provided for Trijicon and ADE. Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. We recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spke..

Precision CNC Machined from Aircraft Grade Aluminum. It is a picatinny mount, to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMRSRO red dots.. Compatible with Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight. Finished in a Matte Black Anodize. Comes with two screws to connect this ADE optic plate to Trijicon RMR..

This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply plug and play. We recommend having a qualified gunsmith to install. This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. This optic dovetail plate made by ADE only fits genuinestandard glock that has a standard factory rear sight. It does NOT for MOSoptics ready glock. It does NOT fit glock with AFTERMARKET slide.. This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy.. This picatinny rail plate also have two built-in screw hole for red dot with Shield RMSRMSc footprint and holosun 407k507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny platesold separately..

ADE RD3-023 Generation 2 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol with a PISTOL that is compatible with RMRSRO, Holosun 407C507C508T footprint red dots.. The Valkyrie Gen 2 fits all pistol with optic cuts for Trijicon RMRSRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMRSRO.. The Valkyrie Gen 2 also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, SW MP 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F10C optics ready, Walther Q5 Match and Springfield XDXDMXDS OSP, Canik TP9 SFXCombat, FN 50945 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint.. Those name brand pistol manufacturer made Optics Ready handguns all come with several mounting platesoptic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR.. ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacture equipped rear sight, ADE Valkyrie's rear white dot acts as a pistol factory original rear sight for Co-Witness. With Motion Activated System, while the Valkyrie is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting. User also has the option to manually turn the red dot power off to disable the Motion Activated System.. Dimension 1.79x1.18x1.4 inches. Weight 1.24 oz. ShockproofFogproof. Fully lockable windageelevation.. 4 MOA GREEN DotNOT RED. Comes with a picatinny mounting plate and a pair of screws. This red dot does NOT comes with any other optic plate to mount on an specific pistol. Operates with a single CR2032 batteryinstall underneath. Gives around 800 hour battery life. Auto powers off after 1 hour of inactivity to save battery.. The difference between ADE Valkyrie and ADE Valkyrie Gen2 is that the Gen2 is slightly shorter in overall length, and the shorter length allows Gen2 to sit into custom RMR cut, while original Valkyrie only fits optic plate for RMR footprint..

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide with optic cut.. The included Glock plate fit some other Pistols such as Canik TP9SFdoes not fit SFX, COMBAT, SA. This Glock plate also fits Taurus GX4, G3C G3 with factory steel sights does not fit any other Taurus models such as G2G2CG3 without factory steel sightTx22PT111 because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications.. Fit Ade RD3-006AHuracan, RD3-006BPython, RD3-009Crusader, RD3-012Delta, RD3-013Bertrillium, RD3-015Zantitium, Vortex venomviper, burris fastfire, meopta, shield, docter, insight Red dots.. This optic mounting plate also fits other red dot brands such as Vortex VenomRazorViper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmrholosunshield footprint red dots.. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearmoptic and personal injury..

This plate is for Ruger 57 pistol ONLY, it does not fit any other pistols.. The plate is compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray, Trijicon RMRSRO, Holosun HS407CHS507CHS508T, Riton X3 Tactix PRD, Trijicon RMRSRO, Swampox KingslayerLibertyJustice red dot sight and Holosun 407C507C. Screws are provided for Trijicon, Holosun 407C507C and ADE. The provided screws may NOT work other red dots listed. If not, we recommend get the right size screws from a local hardware store.. The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex VenomViper, Doctor, Burris Fastfire, Shield RMSRMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spike, Holosun 407k507k.. Precision machined out of 6061 aluminum. Weight .4oz.40grain ammo may be necessary for proper cycling due to heavy RMR sights.

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Wrong Inventory fixed, customer will receive correct footprint for RMS, not RMR. This optic picatinny mount made by ADE is to connect to certain type of optic sight to standard 1913 picatinnyweaver rail. It does not connect to handgun because most handguns does NOT has a picatinny rail on top. Designed to use on ADE RD3-018 SPIKE, RD3-021 Nuwa, RD3-030 Apollo, Shield RMSRMScRMSwSMS and Romeo Zero Red dot sights.. Also Compatible with Leupold Delta Point Pro, JP Enterprises JPoint and Swampfox Sentinel, Vortex Defender-CCW, Bushnell RXC-200 Ultra-Compact red dot sights. Finished in a Matte Black Anodize. Comes with two screws. Does NOT compatible with Holosun 407k507k, user MUST grindlots of grinding to completely REMOVEFlat out the two rear pin to fit 407k507k. Ade has is releasing a new plate made specifically for 407k507k, please search amazon item numberAsin B09TMPGHRL.

Allows the rmr to be submerged up to 66ft for up to 1 hour without leaks. Compatible with all Trijicon manufactured rmr pistol mounts. Made from stainless steel. RMR Sealing Plate. Fits RMR Pistol Mounts. Official Trijicon RMR Accessory. Made in the USA. Professional Installation Recommended.

Custom made for standard Glock 17 19 22 23 34 35 40 41 45 MOS Trijicon RMRSRO Holosun 407507C508T. Precision CNC Machined from 6AL4V aerospace grade Titanium.Ultra Low Profile and lightweight,never rust.. One Piece Design for a Secure Zero Hold,Easy to install. Installation hardware and tools included, we use high-strength alloy steel Torx head screws.. 100 MONEY-BACK warranty within 30 days of purchase NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.

Include 6 custom .390 Length Mounting Screws Compatible with Trijicon RMR Mounting on Glock MOS and most Optics-Ready pistol. Ensure Maximum Thread Depth Engagement.It has a smooth surface finish that makes it more tightly contacted with the bottom seal, Allows your sight to be submerged up to 66ft for up to 1 hour without leaks. Works with direct pistol slide mounting and all other aftermarket pistolsrifle mounts Some cut slide use 4-40 screws, the screws come with this kit will not fit.This kit is NOT FIT copycat red dots.. Greatly reduces the chance of your reflex sight battery losing connection resulting in flickering or temporary loss of your sight's reticle. The Anti Flicker Plate utilizes a raised protrusion directly under the battery to create upward pressure ensuring a reliable battery connection.. The kit includes 1X regular sealing plate,1X anti-flicker sealing plate, 6X custom .390 Length Screws short and 1X Hex Key.. Made from 304 stainless steel with Black finish.100 MONEY-BACK warranty within 30 days of purchaseNO QUESTIONS ASKED. LIFETIME WARRANTY.

Plate fits in Trijicon RMR slide footprint and allows for optics supporting different standard to be mounted. Will not fit Trijicon RMR cutouts that have forward bosses as those interfere with some mount points.. Unfinished and can be painted to match slide. Uses the existing RMR cut rather than piggybacking on the rear sight cut..

Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish.. The same kind of products on the market basically use 6061 aluminum but we use 7075, because 7075 aluminum is almost twice stronger than 6061 aluminum.. Compatible with Trijicon RMRSRO and Holosun 407C507C508T,Ultra Low Profile and lightweight.NOT FIT THE FAKE TRIJICON RMR. One Piece Design for a Secure Zero Hold,Easy to install100 MONEY-BACK warranty within 30 days of purchaseNO QUESTIONS ASKED. LIFETIME WARRANTY. The kit includes 1X mount plate, 1X regular sealing plate,1X anti-flicker sealing plate, 3X RMR Screws short,3Xsocket set screws and 1X Hex Key..

Fit Standard 1 width Gl0ck 17 19 26 RMR Cut Slides. 6082-T6 Aluminum with Color Anodized Finish. Convert RMR to 20mm width Picatinny. Screws included Screw size - 6-32 x 14. Length 1.77 Width 1 .

Aluminum Anodized Black RMR Cover Plate For Glock 17 19 26 Cut Slides.

Custom Made For RMR Cut Slide Without Thread Post and Holosun 407K507K.. Precision CNC Machined from 6AL4V aerospace grade Titanium With Black PVD Finish.Ultra Low Profile and Lightweight,Never Rust.. Lengthen Posts And Custom Length Screws For The Maximum Thread Engagement. One Piece Design for a Secure Zero Hold.Plug and Play,Easy to install, Sturdy and Stable.. 100 MONEY-BACK warranty within 30 days of purchase NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.

Fits Glock 171926 RMR Cut Slides. Aluminum 6061 T6 Anodized Black. Length, Width, Thickness and the Port just fit the Slide Cut. Aluminum 6061 T6 Black Anodized RMR Cover Plate for Glock 17 19 26 Cut Slides.

Pistol red dot mount for red dot pistol sight,such as Trijicon RMR type 2.. Low profile Height of red dot plate is only 0.16 Inches.Fits like a glove. Use locking Torn screws and dovetail insert for a secure zero hold.. RMR mount fit for G17 19 22 23 26 27 34.. Mounting plate is machined from high quality 6061 aluminium alloy,screws made of steel.. Dimension of pistol sight mount1.781.120.16 InchesLWH,Lightweight 0.7 oz20g..