Top 10 Best Romeo Zero Elite

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint PlateSlide seamlessly.. The onoff switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.. Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.. Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.. If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability 99 that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.. ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cutoptic plate that is compatible with shield RMSRMSCDeltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cutoptic plate that is compatible with Trijicon RMRcc footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cutoptic plate that is compatible with Trijicon RMRSROHolosun 407C507C footprint.

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

Optic Shim is made to fit between the red dot and the mounting plate.. Fits Shield RMSRMSCRMSWSMS, ADE RD3-018 SPIKE, Sig Sauer Romeo Zero, Leupold Delta Point Pro, JP Enterprises JPoint, Swampfox Sentinel Red dot Sight. All trademarks mentioned belong to their respective owner, this optic shim is made by ADE as a mounting accessory for the mentioned optics. Does NOT fit Trijicon RMRSRO, Doctor, Vortex VenomViper, Burris Fastfire, ADE RD3-006009012013. Depending on the handgun, some handguns need THIS 1degree shim to give extra range of elevation across a wide range of firearms such as the 1911. Should you feel any resistance from the mechanism whilst zeroing the elevation please fit the shim between the sight and the mount with the thickest part at the rear.. What it does While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turnscrew maxed-out, the location of the illuminated dot is still TOO HIGH, user is UNABLE to adjust the dot LOW enough to zero. Instead of returning the defective red dot, this shim will rise the optic to help user to move the illuminated dot higher to the location to zero. .. Scope base shims Tolerance -.005 Taper 1.0 degree.

IMPROVED ACCURACY - Quick and easy to zero while holding up to strong recoil, this GlassFalcon Red Dot scope promotes rapid target acquisition with a crisp and clear 3 MOA dot.. EASY TO USE - The unique design of our gun sights makes for a hassle-free mount on just about any rifle or pistol setup. A lightweight, compact profile and intuitive controls ensure ease of operation.. HIGH-END OPTICS - All of our rifle and glock sights are tested by optics experts in the USA. The shockproof reflex Sight 3 MOA has been tested for 1000 rounds on all types of guns without losing your zero.. 100 SHOT VISIBILITY - The HD glass offers unbeatable clarity, with 10 brightness levels 8 day, 2 night for any lighting conditions. Perfect for target practice at the range, competitions or hunting. VERSATILE COMPATIBILITY - The weaverpicatinny rail mount is compatible with Vortex, Aimpoint, Holosun, Burris RDS, and more. Its scratch, water, and shockproof, and includes screws and wrenches..

Spectra coat HD polymer lens with 10 times the impact resistance over traditional glass lenses. Weapons grade ultra lite polymer housing, optimized for use with polymer pistols, concealed-carry and also slim slide profiles. Stippling pattern on the housing matches p365 and p365xl grip pattern, for an integrated look. 8 vivid, user-configurable daytime illumination levels. Motac motion activated illumination system that powers up when it senses motion and powers down when it does not. Sport type Airsoft.

Proofs impact resistant. Reticle 6 MOA dot. Series reflex sight. Wind age elevation 120 MOA.

HIGH DURABILITY LENS SpectraCoat HD Polymer Lens gives 10 times the impact resistance over traditional glass lenses. MULTIPLE BRIGHTNESS OUTPUTS 8 vivid, user-configurable daytime illumination levels. SMART ACTIVATION MOTAC Motion Activated Illumination System that powers up when it senses motion and powers down when it does not. PRECISE RED DOT Highly efficient, point source LED emitter for a crisp dot that is 8 times more efficient than conventional red dots. LONG BATTERY LIFE 10-year or 20000 hours battery life unrivaled in a micro reflex sight.

DURABLE CONSTRUCTION - The ROMEO-X COMPACT, inspired by the MIL-SPEC ROMEO-M17, features a rugged CNC Machined 7075 Aluminum Housing, meeting military standards for reliability and performance, ensuring robustness to withstand challenging conditions Suited for the optic ready P365 Family of pistols Designed with RX footprint compatible with Shield RMS-c mounts, ensuring secure and versatile installation on compact pistols. HIGH-QUALITY OPTICAL COMPONENTS - Equipped with a Distortion-Free Aspherical Lens, the ROMEO-X COMPACT open reflex sight from SIG SAUER delivers a clear and distortion-free sight picture for enhanced accuracy The use of quality optical components ensures optimal light transmission and clarity in various shooting conditions. ENHANCED PERFORMANCE - The ROMEO-X COMPACT is equipped with an innovative ultra-low deck height that allows for seamless co-witnessing with standard-height iron sights Additionally, it integrates a patent-pending Beryllium Copper Flexure Arm, enhancing durability and ensuring reliable performance under demanding conditions. VERSATILE RETICLE OPTIONS - This ROMEO-X COMPACT features a Circle Dot reticle with individually selectable 2 MOA Dot 32 MOA Circle, providing versatility for different shooting scenarios Shooters can customize their reticle based on precision needs or quick target acquisition, enhancing adaptability in the field. CONVENIENT IN USE - ROMEO-X COMPACT incorporates intuitive adjustment buttons and a side-mounted power unit compartment for easy access With 20,000 hours of run time and MOTAC technology, it conserves power by activatingdeactivating illumination based on motion The sight offers 15 illumination settings 12 DL 3 NV, providing users with flexibility in adapting the reticle brightness to different lighting conditions.

Dependable IPX-7 Waterproof and Fogproof Performance. Lens Caps Included - MAGNIFICATION 1X by 3X. OBJECTIVE LENS DIAMETER 20 millimeter ROMEO MSR 22 millimeter JULIET3 MICRO. RETICLE 2 MOA DOT - FIELD OF VIEW 7.4. EYE RELIEF 65 millimeter - EXIT PUPIL 7 millimeter - ILLUMINATION 10 DAY 2 NV. WATERPROOF IPX-7.

SpecraCoat HD Polymer Lens with 10 times the impact resistance over traditional glass lenses. Ultralite Polymer housing with stippling pattern that matches the P365XL grip, for an integrated look. MOTAC Motion Activated Illumination System that powers up when it senses motion and powers down when it does not. Highly efficient, point source LED emitter for a crisp dot that is 8 times more efficient than conventional red dots. Factory replacement OD Green grip module for P365XXL without manual safety, Up to 20,000 hours of battery life.

COMPATIBLE WITH Springfield XD, XD MOD.2, XDS, XDM, Holosun 507K,Shield RMSRMSC,Romeo Zero. Does not work with 5.25 XDM competition series model.. Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish.. Update to 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.no more need shim Installation hardware and tools included.. Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.. 100 MONEY-BACK warranty within 30 days of purchase. NO QUESTIONS ASKED.LIFETIME WARRANTY.Please contact us for any questions,7X24 hours quick response..

SpecraCoat HD Polymer Lens with 10 times the impact resistance over traditional glass lenses. Ultralite Polymer housing with stippling pattern that matches the P365XL grip, for an integrated look. MOTAC Motion Activated Illumination System that powers up when it senses motion and powers down when it does not. Highly efficient, point source LED emitter for a crisp dot that is 8 times more efficient than conventional red dots. Factory replacement OD Green grip module for P365XXL without manual safety, Up to 20,000 hours of battery life.

Molded glass aspheric lens with high-performance coatings for superior light transmittance and zero distortion. TruHold Lockless Zeroing System that utilizes twin adjustment springs designed to endure handgun recoil and return to zero shot after shot. MOA red dot with multiple brightness settings for rapid target engagement under a full range of lighting conditions. Point-source emitter provides exceptional brightness with 12 settings 10 Daytime2 NV, and 20, 000 hours of runtime. Motac Motion Activated Illumination System that powers up when it senses motion and powers down when it does not.

HOLOSUN RED DOT SIGHT - The HS407K X2 is an open reflex optical sight designed for subcompact pistol applications It features Red Super LED with up to 50k hour battery life, a crisp 6MOA dot, and 12 reticle intensity settings The HS407K X2 is direct for P365XXL, and requires an adapter plate for slides with a four-boss interface. HIGH PERFORMANCE - This reflex sight for handgun incorporates Lock Mode which locks the buttons preventing inadvertent setting changes when activated The durable housing is made from 7075 Aluminum, uses Holosun's K footprint, and houses the 1632 battery in a side-mounted tray for easy replacement when needed. SHAKE AWAKE TECHNOLOGY - Extends battery life by deactivating the optic's LED while not in use Shake Awake offers settings from 10 minutes to 12 hours depending on the model and can be deactivated altogether if preferred The slightest touch of the optic instantly reactivates the LED so your Holosun reflex sight for pistol is ready when needed. MULTILAYER REFLECTIVE GLASS - This red dot sight is manufactured using optical-quality glass lenses with multilayer coatings applied to facilitate maximum light transmission and wear resistance while reducing glare and facilitating reduced power requirements Holosun's highly reflective coatings produce industry-leading reticle intensity, clarity, and battery efficiency. SPECIFICATION - Reticle 6 MOA Dot Light Wavelength 650nm Magnification 1x Parallax Free Unlimited Eye Relief Battery Type CR1620 Battery Life Hours 50000 Brightness Setting 10 DL 2 NV Window Size 0.58x0.77 Housing Material 7075 T6 Aluminum Surface Finish Anodize Adjustment per Click 1.5 MOA WE Travel Range 30 MOA.