Top 10 Best Secure Badge Holder

RFID SHIELDED Protect your credentials with our FIPS201 Approved badge holder, for 13.56mhz cards.. INDESTRUCTIBLE Molded from Poly Carbonate for military level toughness and durability.. ERGONOMIC Looks sharp and available in 9 colors to match your uniform, work or business attire.. SQUEEZE TO READ Pinch the top to temporarily remove your card from the shielding and gain access.. USA MADE Molded and Assembled by our expert team in Florida facilities, millions shipped worldwide.

2 CARD HOLDER Conveniently carry two key cards, held tight so you never lose your identification.. RFID SHIELDED Protect your credentials with our FIPS201 Approved badge holder, for 13.56mhz cards.. INDESTRUCTIBLE Molded from Poly Carbonate for military level toughness and durability.. SLIM DESIGN Looks sharp and available in 9 colors to match your uniform, work or business attire.. USA Designed, Molded and Assembled - Our slim polycarbonate frame is tough as nails and will last you for years.

Holds 1 Contactless RFID ID card and blocks card from being scanned without your knowledge. Patented Squeeze-to-read technology for ease of use. No more removing your card from a shielded holder to be read at access point. Simply squeeze the top like a clip board and the card shielding is removed and card can be read. Let go and card automatically becomes shielded again.. FIPS 201 Approved. ID Stronghold made the first ever FIPS 201 approved shielded holders and has more FIPS 201 approved shielded products than any other manufacturer.. Physically protects card, weather and water resistant. True stainless steel spring clips. This holder is designed for 13.56mhz ID cards such as the military CAC, US Government PIV, HID iClass and more. If you have a 125khz HID Prox card you should order our BloxProx trm version as it protects both frequencies.. The combo includes one classic badgeholder, one 36 inch 914mm long and 38 inch 10mm wide lanyard with polyester flat braided material, and one IDSH Logo Badge Reel thats good for 100,000 Pulls Theres a safety break away and a wide no twist flat hook on the lanyard.. Our classic badgeholder is molded and assembled in the USA..

RFID SHIELDED - Protect your contactless cards from electronic pickpockets with the industry's best.. USA Designed, Molded and Assembled - Our slim polycarbonate frame is tough as nails and will last you for years. 2 CARD HOLDER - Securely holds one card on each side so both cards are easily displayed.. LANYARD REEL INCLUDED - 36 x 38 Lanyard with J Hook Carabiner Retractable Badge Reel.. ID Stronghold is the original RFID Blocking Company with FIPS 201 Approval for all our ID holders..

DESIGNED AND ENGINEERED BY GOVO IN OHIO, USA. DURABLE AND LIGHT WEIGHT The holders body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. Weights 1.4 oz.. PATENTED CLIP The first and only badge holder with a metal clip allow you to carry your ID on your belt, pocket, key chain, backpack or a lanyard. The opening on top of the clip is designed for connecting to lanyard or carabiner. The clip is made from manganese steel making it strong and durable.. PATENTED SPRING-LOADED CARD HOLDING SYSTEM It holds cards well no matter it is loaded with 1 card or 4 cards. The spring holds cards on the sides so it wont damage your cards or let them slip out. Unlike plastic retainer, metal spring does not lose elasticity.. DOUBLES AS A WALLET The GOVO T4 can be used as a wallet thanks to its 4 cards capacity. You can carry your credit cards, driver license and work ID all in one in this compact holder. The steel clip can also be used as a cash clip..

Blocks RFID chips in cards from being read without permission. User can easily insert and remove card from holder with one hand. Physically protects card, weather- and water-resistant. 100 Made in USA. FIPS 201 Approved Products.

BUILD TO LAST All metal zinc alloy construction with steel wire cord makes the most durable retractable badge holder, tested under more than 100,000 pulls. Package includes 2pcs retractable id badge holder with reel clip and ID strap, last forever.. HEAVY DUTY Max loading weight is 150g5.3oz or 8 keys compares to 85g3oz or 4 keys of other items on the market. Comes with key ring and perfect as retractable key chain. NOTICE All metal construction with longer steel cord makes this badge reel bigger and heavier. Choose small versions on this page if you need lightweight badge reel B086KSZ4ZDB08R5KYC5Q. NON-BREAKABLE CORD 27.5 steel wire cord that is much stronger and longer than normally 24 inch Nylon pull cord of other items. Unlock doors and access office is a breeze with this retractable badge reel.. SOLID REEL CLIP The clip is screw-fastened in the back side so no need to worry that it will fall off. Easily clip on to belts, pockets, purse straps, backpacks or anywhere you like. Perfect name card badge holder for any industry, men and women. Great for nurses, maintenance, medical and office staff, airport FAA and TSA, security staff, police, military, government, teachers, students, custodians, factory workers, employees, outdoor enthusiast, etc.. Buy with confidence Please don't hesitate to contact us via Amazon message system with your order ID if at any time you aren't completely satisfied with your purchased, we will try our best to make things right..

Practical design the badge holder is designed with open face, allow for ID to be clearly seen in secure environment It is a dual card slot design, each one can hold 2 standard ID cards at the same time, you can put two cards in the vertical and horizontal directions for easy use. Slide to read the design of ID badge holder is easy to manage and access When using your card for non-contact, no need to remove the card from the holder, simply sliding either card half way out allows it to be read by the door scanner It is great for badges that needed to be taken out frequently to swipe in a work environment. Hard to break made of heavy duty rigid poly-carbonate plastic, this ID holder will not off-gas or give any plastic odors, its sturdy and durable to keep your important card from damage Badge holder has smooth edge, make it easy to use without being hurt. Colors design these badge holders are in black, clear, blue, red and purple color, the chain holes in the badge holder allow for easy connection to alligator clips, neck strap or retractable badge reel They are easy to match uniform, work or business attire and participate in different situations. Wide application this badge reel is only works with flat cards, thick clamshell and beveled cards are not compatible It is suitable for ID cards, credit cards, membership card, hotel key, kids bus pass, driver license, school cards, etc..

This RFID protection card holder holds one or two cards which are size as standard credit card. This badge holder have RFID blocking function so good choice for all contactless cards due to RFID protection for improving security.. This RFID blocker badge holder is made by RFID protection material which blocking RFID reading when cards are in the ID card holder. The NFC RFID blocking function improves security level, because it protects your contactless card from unauthorized reading which might be nowadays possible by criminals. Thats why this RFID blocking badge holder is important to use for cards as cac card, twic card HSPD 12 PIV credentials PIV card, smart card, Fed ID card and for personal contactless debit card.. When you need to present your card to reader, you can easily remove your card from the card holder and put the card back to the holder. You can put one card to both sides of the badge holder so this holds two cards. To other side you can insert and remove the card from the top. To other side you can insert and remove the RFID card sliding from the side. And you can also slide the card about halfway out easily with one hand when you need present the card to the access control door reader.. This RFID safe badge holder is GSA FIPS 201 Approved.. This RFID blocker badge holder is compatible also with the ReelStrap which is very useful adjustable retractable lanyard ID holder. Together the ReelStrap and the RFID blocking card holder are perfect lanyard badge holder..

Detachable Id Badge Holder The end piece snap into Card Holder lock cards inside never falling out, and can unlock remove cards out with matching key Include . Horizontal and Vertical Dual-Use Work in both ways,two slot holes allow for easy connection to your lanyard,retractable badge reel. Hold 3 Id badges Each Name Card Protector can hold 3 Cards,ideal for office key cards, smart PIV, CAC, and all ISO laminated card drivers license credit card size ,L x W 3.370x 2.125 85.6mmx53.98mm. Sturdy and Durable The Identification Badge Holder material is Hard Plastic avoid from broken to prevent glare off of your photo ID badge and from scratches. RFID Cards in the Id Card Holder can be scanned by RFID and Prox Card scanners, but if inside multi-cards,the middle cards may can't be scanned..