Top 10 Best Shark Bites Plumbing Fittings 1/2

PIPE CONNECTOR Brass pipe connectors are perfect for making easy connections between same-size pipe ideal for use in tight spaces Large diameter fittings 1-14 to 2 inches require a Stiffener sold separately when connecting to PEX pipe. VERSATILE SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe approved for underground and behind-the-wall applications with no access panels Wrapping required when burying underground. EASY TO INSTALL Straight coupling can be easily installed without the need for soldering, glue, or additional tools can be installed in wet lines. LEAD FREE Straight coupler is composed of strong and sturdy lead free DZR brass. CERTIFIED Water service coupling is rated to 200 psi and 200 degrees F 93 degrees C.

INSTALLS IN SECONDS 12 Inch ball water valve requires no special tools, no soldering, no crimping or glue push-to-connect design provides an efficient application that saves time and money just push to create a watertight seal. VERSATILE Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any combination. PERFORMANCE SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit. QUALITY Only SharkBite's quality and performance is field-proven. PREFERRED BY THE PRO All SharkBite fittings meet the same standards for commercial and residential plumbing applications.

SHARKBITE BRASS PUSH 45 DEGREE HOSE BIBB Multi-turn shut-off valve with mounting tabs and angled handle can be used for water flow regulation features a patented one-piece 2.4-inch diameter mounting flange and inlet connection. VERSATILE Brass push 45-degree hose bibbs work well with PEX, CPVC, PE-RT, HDPE, and copper pipes combines a 34 inch garden hose outlet with a 12 inch or 34 inch inlet at a 45-degree angle to prevent hose kinks ideal for working in tight spaces. EASY TO INSTALL The innovative design of the SharkBite brass push multi-turn hose bibb allows for quick and easy installation, with no tools, crimping, glue, or soldering required can be installed in wet lines remove using a disconnect clip or disconnect tongs. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use ideal for replacement and new construction installation. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

INSTALLS IN SECONDS Repair with no special tools, soldering, crimping, or glue Just push to create a quick watertight union with SharkBite pushfit connectors. VERSATILE SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination. LEAD-FREE Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines. PREFERRED BY THE PROS All SharkBite fittings meet the same standards for commercial and residential plumbing applications. MADE IN THE USA All SharkBite valves, joints, and adapters are manufactured and tested in the USA.

BRASS TEE Tee Fitting features innovative push-to-connect design makes for quick and easy installation when joining same-size pipe ideal for use in tight spaces. VERSATILE Tee coupling is compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe approved for underground and behind-the-wall applications with no access panels Wrapping required when burying underground Requires a stiffener when conencting to PEX pipe Sold separately. EASY TO INSTALL SharkBite plumbing fittings do not require any soldering, glue, or crimping for installation can be installed in wet lines. LEAD FREE Tees are composed of durable lead free DZR brass. CERTIFIED Tee connectors are rated for 200 degrees F 93 degrees C.

SHARKBITE BRASS SLIP COUPLING This push-to-connect full flow fitting allows you to repair a burst or a leak easily and efficiently does the job of two couplings and extra pipe remove using a disconnect clip or disconnect tongs. COMPATIBILITY These brass slip couplings work well with CPVC and copper pipes only only one end of the coupling has a stop, allowing the opposite end to slide freely over the end of a pipe. EASY TO INSTALL The innovative push-to-connect design of the Sharkbite brass slip connectors allows for quick and easy installation, with no tools, crimping, glue, or soldering required can be installed in wet lines. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects. SPECS Made of high-quality forged DZR brass these SharkBite slip couplings can withstand a working temperature of 200 degrees F and a working pressure of 200 PSI.

SHARKBITE BRASS PUSH ANGLE STOP Brass push angle stop valves are used to control and shut off water flow to fixtures or appliances for maintenance and repair ideal for working in tight spaces remove using a disconnect clip or disconnect tongs. VERSATILE Brass push angle stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes. EASY TO INSTALL This innovative stop valve features a 12-inch push-to-connect inlet and a quarter-turn full-port brass ball valve for quick and easy operation no special tools, crimping, glue, or soldering needed can be installed in wet lines. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use feature a sleek chrome finish for an attractive appearance. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

BRASS MALE FITTING Male fitting can be used to connect to any combination of copper, PEX, CPVC, or PE-RT pipes can be used for wet lines. EASY TO USE Straight connector features an innovative push-to-connect design allows for quick and easy installation no tools, soldering, crimping or glue required. COMPATIBLE WITH TIGHT SPACES Brass fitting can be easily rotated on pipe after installation for use in tight spaces. DURABLE Fitting is lead free and corrosion resistant for long lasting durability and reliability. CERTIFIED MNPT fitting is certified as a manufactured joint, and can be used for underground and behind-the-wall applications without access panels rated for 200 psi and 200 degrees F.

SHARKBITE BRASS PUSH STRAIGHT STOP Brass push straight stop valves are used to control and shut off water flow to fixtures or appliances for maintenance and repair ideal for working in tight spaces remove using a disconnect clip or disconnect tongs. VERSATILE Brass push straight stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes. EASY TO INSTALL This innovative stop valve features a 12-inch push-to-connect inlet and a quarter-turn full-port brass ball valve for quick and easy operation no special tools, crimping, glue, or soldering needed can be installed in wet lines. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use feature a sleek chrome finish for an attractive appearance. MADE IN THE USA All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

SHARKBITE BRASS PUSH FEMALE ADAPTER This push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily ideal for working in tight spaces remove using a disconnect clip or disconnect tongs. VERSATILE Pushfit female connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes large diameter fittings 1-14 inches to 2 inches require a Stiffener when connecting to PEX pipe. EASY TO INSTALL The innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required can be installed in wet lines. PREFERRED BY THE PRO SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels. SPECS Made with DZR forged brass, this female adapter can withstand 200 degrees F and 200 PSI.