Top 10 Best Shield Smsc

This green dot sight comes equipped with a Picatinny mounting base and is also compatible with various handgun mounting plates that replace the rear sight dovetail. It's designed to fit the Doctor Footprint PlateSlide seamlessly.. The onoff switch for this sight is conveniently positioned at the front, making it much easier to press compared to red dots with side-mounted switches. It features a 3 MOA dot size and offers 5 illumination settings. The sight is fully adjustable for windage and elevation and can be locked into place. With unlimited eye relief and various illumination settings, it is powered by an included lithium CR2032 battery.. Since its initial release in 2014, we've implemented numerous improvements to enhance its durability, ensuring it can withstand recoil while also improving its ability to hold zero. The front switch, battery housing, and hardware have all been recently updated, reflecting our commitment to continuous enhancement. This product is proudly designed in Oregon.. Although it's feasible to install the optic on a handgun without the assistance of a gunsmith, we highly recommend seeking the expertise of a professional for the installation process. It's essential to note that unprofessional installations, such as improper torque application, can lead to issues like loose screws, an inability to hold zero, damage to the firearm or optic, and even pose a risk of personal injury.. If you're not seeing a perfect round dot but instead observe a splashed dot, half-moon shape, multi-dot, or starburst, there's a high probability 99 that you might have astigmatism without being aware of it. What you perceive is likely a small reflection of the LED light on the lens. A quick and simple way to confirm this is by using your cellphone to take a photo of the dot. If the photo shows a circular dot, you've essentially diagnosed yourself with astigmatism.. ADE RD3-006 Huracan,RD3-009 Crusader,RD3-012 Delta, RD3-012 PRO, RD3-013 Bertrillium ,RD3-015 Zantitium, RD3-028 Ares fit optic cutplate that is compatible with Vortex VenomBurris FastfireDoctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa, RD3-021 NUWA PRO and RD3-030 Apollo fit optic cutoptic plate that is compatible with shield RMSRMSCDeltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cutoptic plate that is compatible with Trijicon RMRcc footprint. ADE RD3-019 Stingray, RD3-020 Raptor, RD3-022 Artemis, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cutoptic plate that is compatible with Trijicon RMRSROHolosun 407C507C footprint.

Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 batteryIncluded.It is also compatible with varies handgun mounting plates that replace rear sight dovetail.. This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for DoctorVenom type red dot.. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short... Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable Unlimited Eye Relief. Powered by a lithium CR2032 battery. ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slidefootprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..

This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dotthis one and FDETAN body 4MOA Red dot.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This FDETAN body color RED Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADEs popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADEs FDE color will not 100 match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter. ADE Spike also available in Black body and RED Dot. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum in FDE body and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

This is ADE's new GREEN dot version of RD3-018 Spike. The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dotthis one and FDETAN body 4MOA Red dot.. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XP365XLP365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

DUTY GRADE DARN RIGHT Other companies are producing slimline pistol dots with plastic bodies and clear polymer lenses. Thats not our style. Sentinel is crafted from CNC machined 7075-T6 aluminum, hard coated in matte black, and features multicoated glass of the same excellent quality used in our long-range precision rifle scopes.. BUT WHAT DOES IT FIT Sentinel is really small. About an inch tall, an inch wide, and 1.6 inches long. Shoehorned into this tiny scope is a 16mm x 16mm window, big enough for fast acquisition and sight tracking, small enough that it doesnt affect concealment at all. Sentinel will any slimline slide with an RMSc footprint incorporated.. BET YOUR SS DEPENDABLE A concealed carry optic must be ultra dependable, because you are literally betting your life that it will be ready when called upon. Sentinel is dunk it waterproof when installed using the included flexible seal that fits between the optic and footprint. It is shock rated to an incredible 1500 G.. MANUAL VS. AUTOMATIC, THE CHOICE IS YOURS Sentinel-M manual features ten manually adjusted brightness settings accessed via digital push buttons. Shake N Wake motion sensing preserves battery life when Sentinel-M has been still for about 4 minutes. With new motion, Sentinel-M resumes its previous brightness level.. Sentinel-A automatic truly never sleeps. A photosensitive sensor on the left side of the body provides dot brightness relative to ambient light conditions. There are no manual controls at all, no Shake N Wake no way for Sentinel-A to be accidentally shut off, ever. Install the CR2032 battery underneath Sentinel-A and youre good to go for two years straight..

DIMENSIONS 1.7 L x 1 W x 1 D and a weight of 1 ounce - Compatible with Shield RMS and Jpoint footprints. RUNTIME 20,000 hours of battery life that runs on 1 CR1632 battery included. EASE OF USE CT Radiant ambient light sensor automatically adjusts reticle brightness. ACCURACY Sight features 3 MOA red dot reticle for easy target acquisition and integrated co-witness sight for added confidence. DURABLE Constructed from aerospace grade aluminum with recessed optic lens for added protection IPX4 water resistant.

DURABLE Aircraft Aluminum. COLOR Hard Anodized Black. DOT LED 4 MOA. ORIGIN Made in UK. BATTERY 3 Yrs. Life Approximately CR2032. LENS Glass Parallax Free 1X. PROFILE Ultra Low, Co-Witness w Stock Sights. ARMOR Upgradeable w Armor Hood. FITMENT GLOCK G43XMOS GLOCK G48MOS SIG SAUER 365XL SIG SAUER P322 SPRINGFIELD ARMORY HELLCAT OSP HELLCAT PRO OSP WALTHER PPS M2 WALTHER Q4Q5 Match CANIK TP9 SC Elite CANIK RIVAL SFX BUL SAS2 Viper RUGER MAX-9 SMITH WESSON Performance Center MP9 M2.0 SMITH WESSON MP9 Shield Plus Optics Ready MOSSBERG MC2 sc MOSSBERG 940 Rifle and more.. MODEL Gen II 2020 Do you have the right Optics Ready screw set Some optics-ready guns require a different set of screws. Our sight retail packaging includes 2x M4x8mm 2x M4x10mm screws..

DESIGNED FOR CONCEALED CARRY Designed to fit on many of the most popular concealed carry pistols on the market. OUTSTANDING DURABILITY Unique, patented housing shape diverts the force of an impact away from the lens, greatly increasing durability. COMPLETE USER-CONTROL ILLUMINATION SETTINGS 8 brightness settings, including 1 super bright mode and 2 night vision modes. EASILY ADJUSTABLE WINDAGEELEVATION No need for special tools. 3 MOA per tick. CRISP 3.25 MOA DOT For both eyes open shooting, an illuminated aiming point keeps your focus on the target.

A 3 MOA red dot built for modern everyday carry, the micro-sized Defender-CCW delivers maximum concealment, reliability, and the quickness you need. The slim profile means no extra bulk or width for a smoother, no-snag draw.. Meant for those who prioritize personal protection, the Defender-CCW is a complete redesign from our current MRDS and lets you carry more discreetly. It will fit all Shield RMS and Shield RMSc footprints without any modification.. Motion activation automatically wakes up the red dot for use while the 14 hour auto-shutoff preserves battery life. The fast-rack textured front face adds grip for racking slide off of any surface.. The large, aspherical lens provides a class-leading sight window larger than Viper and Venom MRDS for a distortion-free sight picture and truer colors. A brilliant, illuminated dot helps you lock on target faster and more accurately, even in low light.. Waterproof, shockproof and with ArmorTek coating protecting the lens, the Defender-CCW is ultra-durable. The ShockShield polymer insert absorbs everyday impacts and brings increased toughness..

This Patent Pending Neoprene cover is designed to fit the Shield RMSc scope.. This weather resistant cover will protect the scope in all environments and is soft enough to keep from scratching the scope.. Sold in a 2-pack.. DOES NOT INCLUDE SCOPE.

The fastest, most accurate, ultra-compact micro reflex sight the ROMEOZero has been optimized for everyday concealed carry and guns with slim slide profiles. The sight features a ruggedized, textured polymer body and the SpectraCoat HD Polymer lens system with 10 times the impact resistance over traditional glass lenses. Stippling pattern on the housing matches P365 and P365XL grip pattern, for an integrated look 8 vivid, user-configurable daytime illumination levels. MOTAC Motion Activated Illumination System that powers up when it senses motion and powers down when it does not Parallax free. Highly efficient, point source LED emitter for a crisp dot that is 8 times more efficient than conventional red dots.

HOLOSUN RED DOT SIGHT - The HS407K X2 is an open reflex optical sight designed for subcompact pistol applications It features Red Super LED with up to 50k hour battery life, a crisp 6MOA dot, and 12 reticle intensity settings The HS407K X2 is direct for P365XXL, and requires an adapter plate for slides with a four-boss interface. HIGH PERFORMANCE - This reflex sight for handgun incorporates Lock Mode which locks the buttons preventing inadvertent setting changes when activated The durable housing is made from 7075 Aluminum, uses Holosun's K footprint, and houses the 1632 battery in a side-mounted tray for easy replacement when needed. SHAKE AWAKE TECHNOLOGY - Extends battery life by deactivating the optic's LED while not in use Shake Awake offers settings from 10 minutes to 12 hours depending on the model and can be deactivated altogether if preferred The slightest touch of the optic instantly reactivates the LED so your Holosun reflex sight for pistol is ready when needed. MULTILAYER REFLECTIVE GLASS - This red dot sight is manufactured using optical-quality glass lenses with multilayer coatings applied to facilitate maximum light transmission and wear resistance while reducing glare and facilitating reduced power requirements Holosun's highly reflective coatings produce industry-leading reticle intensity, clarity, and battery efficiency. SPECIFICATION - Reticle 6 MOA Dot Light Wavelength 650nm Magnification 1x Parallax Free Unlimited Eye Relief Battery Type CR1620 Battery Life Hours 50000 Brightness Setting 10 DL 2 NV Window Size 0.58x0.77 Housing Material 7075 T6 Aluminum Surface Finish Anodize Adjustment per Click 1.5 MOA WE Travel Range 30 MOA.