Top 10 Best Sig Red Dot

Designed to fit Canik Elite TP9 SC, Canik METE SFT, TP9 SC, TP9 SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, Mossberg MC2SC, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens.. ADE NUWA is the firstand the onlyred dot with RMSRMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting.. 2MOA Red Dot. Weight approximately 15.5 grames0.55oz, Length1.5 x Width..88 x Height.89. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE NUWA's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

ADE is introducing all new APOLLO PRORD3-030PRO. This ADE APOLO PRO is designed to fit any pistolmounting plateslideoptic cut with RMSRMSC screw patternfootprint.. Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.. The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery. There is no physical onoffbrightness button. The sensor does it all.. Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.. Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames0.61oz, Length1.6 x Width1 x Height.9. The objective lens is 22mmx16m0.87x0.63. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take..

This FDETAN body color RED Dot is one of ADE's newest product in 2022. ADE is now offering FDE body color optics for several of ADEs popular red dot models. The FDE standards for Flat Dark Earth, it is a Tan-ish color. This ADEs FDE color will not 100 match every FDE color handgun on the market because every handgun company made their FDE color proprietary, however, it will look great even the color might be slightly darker or lighter. ADE Spike also available in Black body and RED Dot. Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XLP365X, Ruger Max-9, Glock 43X MOS48 MOSnot compatible with regular glock 43x48 that are not MOS, Springfield Hellcat OSP, SW Shield 2.0 Optics Ready, SW MP9 EZ, SW MP shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistolmounting plateslide with RMSRMSC screw patternfootprint.. Hard coated aircraft aluminum in FDE body and multi-coated glass. Not plastic body with polymer lens.. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.. 4MOA, Weight approximately 17.6 grames0.62oz, Length1.6 x Width.92 x Height.93. Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distancegap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plateadapter to replace the pistol manufacturer equipped rear sight, ADE Spike's rear white dot will act as a pistol factory original rear sight for Co-Witness.. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.. Comes with 3 pairs of screws for Sig P365XLX, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cutslide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.. ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size..

IMPROVED ACCURACY - Quick and easy to zero while holding up to strong recoil, this GlassFalcon Red Dot scope promotes rapid target acquisition with a crisp and clear 3 MOA dot.. EASY TO USE - The unique design of our gun sights makes for a hassle-free mount on just about any rifle or pistol setup. A lightweight, compact profile and intuitive controls ensure ease of operation.. HIGH-END OPTICS - All of our rifle and glock sights are tested by optics experts in the USA. The shockproof reflex Sight 3 MOA has been tested for 1000 rounds on all types of guns without losing your zero.. 100 SHOT VISIBILITY - The HD glass offers unbeatable clarity, with 10 brightness levels 8 day, 2 night for any lighting conditions. Perfect for target practice at the range, competitions or hunting. VERSATILE COMPATIBILITY - The weaverpicatinny rail mount is compatible with Vortex, Aimpoint, Holosun, Burris RDS, and more. Its scratch, water, and shockproof, and includes screws and wrenches..

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance. Includes a M1913 Picatinny low mount riser and a co-witness 1.41in riser mount.

High-performance lens coatings for excellent light transmission and dot contrast in any situation.. Ultra-compact size and weight with unlimited eye-relief and parallax-free operation.. Precise 2 MOA Dot. 1. 41 T10 Torx M1913 Skeletonized lightweight Riser Mount for absolute co-witness. Top loading battery compartment with integral brightness control featuring 10 daytime and 2 NV settings. Over 20,000 hours runtime on a CR1632 battery. Aircraft grade aluminum housing and mount. Dependable IPX-7 waterproof and fog-proof performance.

2 MOA Red-Dot provides 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC Motion Activated Illumination powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000 hour battery life. Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications. Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance. Ships with co-witness 1.41in riser mount pre-installed. Download the instruction manual not included in package.

Sig Sauer Romeo 7, Sight, 1X30mm, Fits M1913 Rail, GraphiteFinish, Full Size, 2 MOA Red Dot, 0.5MOA Adjustments SOR71001.

HIGH PERFORMANCE - Robust, compact ROMEO5XDR red dot sight with 50,000 hour battery life paired with the ultra-compact and lightweight JULIET5-Micro 5X magnifier is the best choice for avid shooters These electro-optics gun stock accessories ensure a lifetime of reliable service. ROMEO5XDR SIGHT - The XDR in ROMEO5XDR stands for Extended Dot Range, indicating an expanded illumination setting for the 2 MOA red dot reticle can be toggled between a 2 MOA dot or a 65 MOA circle dot reticle This allows users to adapt the brightness level according to different lighting conditions, ensuring optimal visibility in various environments. VERSATILE APPLICATIONS - With its 1x magnification, the ROMEO5XDR is a versatile sight suitable for a wide range of applications, including rapid target acquisition on shotguns, and even certain handguns Its compact design makes it well-suited for both tactical and sporting use. JULIET5-MICRO 5X MAGNIFIER - The Juliet5-Micro Magnifier features high-performance lens coatings, including a dielectric-coated prism, which ensures excellent light transmission This translates to a clear and bright sight picture, providing the shooter with enhanced clarity in various lighting conditions. CONVENIENT IN USE - The magnifier is equipped with a 90-degree push-button flip-to-side mount, allowing the shooter to quickly transition between magnified and non-magnified views With dependable waterproof and fog-proof performance, the Juliet5-Micro maintains optical clarity even in adverse weather conditions.

DURABLE CONSTRUCTION - The ROMEO-X COMPACT, inspired by the MIL-SPEC ROMEO-M17, features a rugged CNC Machined 7075 Aluminum Housing, meeting military standards for reliability and performance, ensuring robustness to withstand challenging conditions Suited for the optic ready P365 Family of pistols Designed with RX footprint compatible with Shield RMS-c mounts, ensuring secure and versatile installation on compact pistols. HIGH-QUALITY OPTICAL COMPONENTS - Equipped with a Distortion-Free Aspherical Lens, the ROMEO-X COMPACT open reflex sight from SIG SAUER delivers a clear and distortion-free sight picture for enhanced accuracy The use of quality optical components ensures optimal light transmission and clarity in various shooting conditions. ENHANCED PERFORMANCE - The ROMEO-X COMPACT is equipped with an innovative ultra-low deck height that allows for seamless co-witnessing with standard-height iron sights Additionally, it integrates a patent-pending Beryllium Copper Flexure Arm, enhancing durability and ensuring reliable performance under demanding conditions. VERSATILE RETICLE OPTIONS - This ROMEO-X COMPACT features a Circle Dot reticle with individually selectable 2 MOA Dot 32 MOA Circle, providing versatility for different shooting scenarios Shooters can customize their reticle based on precision needs or quick target acquisition, enhancing adaptability in the field. CONVENIENT IN USE - ROMEO-X COMPACT incorporates intuitive adjustment buttons and a side-mounted power unit compartment for easy access With 20,000 hours of run time and MOTAC technology, it conserves power by activatingdeactivating illumination based on motion The sight offers 15 illumination settings 12 DL 3 NV, providing users with flexibility in adapting the reticle brightness to different lighting conditions.

Dependable IPX-7 Waterproof and Fogproof Performance. Lens Caps Included - MAGNIFICATION 1X by 3X. OBJECTIVE LENS DIAMETER 20 millimeter ROMEO MSR 22 millimeter JULIET3 MICRO. RETICLE 2 MOA DOT - FIELD OF VIEW 7.4. EYE RELIEF 65 millimeter - EXIT PUPIL 7 millimeter - ILLUMINATION 10 DAY 2 NV. WATERPROOF IPX-7.

Sig Sauer Sor43031 Romeo4T Red Dot. Sight, Ballistic circle dot, Solar. Strong, lightweight 7075 Aluminum housing. 0.5 MOA Adj, side Battery, Hex bolt mount and spacer, black. Department - unisex-adult. Included Components - 1554 red-dot-sights. Material - Plastic.. Ultra durable and lightweight 7075 aluminum main housing and components, 1.41 inch riser mount with additional lower 13 co-witness spacer. Complete Mil-Spec 810G testing, submersible up to 20 meters.

HIGH PERFORMANCE - Lightweight and crystal clear, the Sig Sauer Romeo5 Tread Red Dot Sight is designed for those up close situations when you need to find your target quickly This compact sight with 1x aiming solution is optimized for the SIG M400 Tread. ENHANCED ACCURACY - To ensure maximum accuracy and performance, the 2 MOA red dot sight features ultra-low parallax and unlimited eye relief This Sig Sauer sight has 10 illumination settings 8 daylight plus 2 NV for visibility in all light conditions. MOTAC TECHNOLOGY - The Romeo 5 Tread Red Dot Sight has the Motion Activated Illumination that powers up when it senses motion and powers down when it does not It provides optimum operational safety and enhanced 40,000 hour CR2032 battery life. ROBUST CONSTRUCTION - The rugged and reliable design of this closed red dot sight prolongs the functioning of the optics Dependable waterproof IPX-7 rated for complete water immersion up to 1 meter and fog-proof performance increase durability. DELIVERY SCOPE - The package of the Sig Sauer Romeo5 Tread gun sight includes an M1913 Picatinny low mount riser and a co-witness 1.41 riser mount The integrated M1913 Picatinny interface provides industry-standard mounting options for wide applications.

Designed for modern semi-automatic pistols, MSR platforms and shotguns. Short and medium range engagements and recreational shooting across a wide range of calibers and light conditions. Fully ruggedized and impact resistant for the toughest environments. Ultra durable and lightweight 7075 aluminum main housing and components. Comes standard with see-through lens covers and hex bolt mount.